• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.21-27
• /
• 2003

Micro-arc discharge oxidation (MDO) is a cost-effective plasma electrolytic process which can be used to improve the wear and corrosion resistance of Al-alloy parts by forming a alumina coating on the component surface. However, the MDO coated Al-alloy components often exhibit relatively high friction coefficients and low wear resistance fitted with many counterface materials, additionally, the pitting corrosion for the MDO coated AI-alloy components, especially for a thinner alumina coating, often occurs in atmosphere circumstance due to the porous alumina coats. Therefore, a duplex treatment, combining a MDO coated ahumina thin layer with a TiN coating, prepared by magnetron sputtering (MS), has been investigated. The Vicker's microhardness, pin-on-disc, electrochemical measurement, salt spray, XRD and SEM tests were used to characterize and analyze the treated samples. The work demonstrates that the MDO/MS coated samples have a combination of a very low friction coefficient and good wear resistance as well as corrosion since the micro-holes on alumina coating are partly or fully covered by TiN material.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.29.1-29.1
• /
• 2018

With their complex structure that includes a thin disc, spiral arms, and often a bar, galaxies have been regarded as something beyond the human perceptions. Hence, the studies on galaxy formation in the 20th century have almost exclusively based on schematic scenarios. With markedly improved knowledge on cosmology over the last couple of decades, we have finally acquired a base from which galaxy formation can be studied from the first principles of physics. I review the modern history of the study of galaxy formation and present some preliminary results from the most recent numerical simulations that provide more realistic pictures of galaxy formation than was available ever before. In terms of galaxy formation, the age of scenarios is fading away, while the age of physical understanding is rising over the horizon.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1202-1209
• /
• 2009

Antimicrobial activity of UlGeum (Curcuma longa L.) was investigated. Methanol extract of dried UlGeum was fractionated to hexane, chloroform, ethyl acetate, butanol and water fraction. The antimicrobial activity of five crude fractions were examined using impregnated paper disk agar diffusion. Ethyl acetate fraction showed the highest inhibitory effect on the microorganisms such as B. subtilis, S. aureus, E. coli, L. monocytogenes and V. parahaemolyticus at 1,000 ${\mu}g$/disc. Ethyl acetate fraction was further fractionated by silica gel column and thin layer chromatography (TLC). The antimicrobial compound was isolated from their fractions and its chemical structure was identified as a 2,3-dihydrobenzofuran by GC-MS and $^1H$-NMR.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.91-109
• /
• 1991

The purpose of this study were to comfirm the effects of the thickness and kinds of porcelain, etchants, illumination time, elapsed time for the measurement, and chemical cure component to the bond strength of porcelain laminate and composite resin cement, and to compare the effects between the light cured resin and the dual cured resins. The etched porcelain surface, the sectioned surface crossing porcelain and resin after bonding, and the debonded surfaces were observed by the SEM. One product of laminate porcelain powder, one light cured resin and two dual cured resins were selected. Each resin cements are lightened through the thin porcelain disc which was cut from cylindrical porcelain specimen by the diamond saw, and by the light through the porcelain disc they were bonded. Changes of thickness and kinds of porcelain, etchants, illumination time, and the elapsed time for the measurement were considered as variables for the bond strength. And the bond strength of porcelain and dual cured resins under the conditions of autopolymerization or the removal of chemical cure component were measured and compared. Bond strength were measured by shear stress. The etched surface, the cross-sectioned surface, and the debonded surface of porcelain or resin were observed by SEM. On the summary of this study, the following conclusions can be stated; 1. Bond strength of light cured resin was decreased inversely by the thickened porcelain laminate and showed the lowest value to the masking dentin porcelain among 4 kinds of porcelain powder. 2. Bond strength of autopolymerization of dual cured resin without illumination in dark chamber were from 75% to 98% to the data of dual cured resin with illumination. 3. Bond strength of dual cured resin used without chemical cured components were same to them of light cured resin. 4. Cross-sectioned surface treated by silane did not show the gap between the porcelain and resin. 5. Illumination over 80 seconds did not make the significant increase of bond strength on all kinds of resin.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.569-573
• /
• 2003

To determine the antimicrobial activity of methanol extracts form 'Formosa' plum against 4 kinds of pathogenic bacteria, the fermosa were got at different growth stages and were extracted using methanol, respectively. The Formosa methanol extracts treated with 5.0 mg/disc showed the highest antimicrobial activity against 4 kinds of pathogenic bacteria and those of Formosa 1-4(immature fruit), which thin out 10∼25 days before foal harvest, showed higher antimicrobial activity against gram positive and gram negative microorganisms than Formosa 5-6(mature fruit). Especially, the methanol extracts of Formosa 1 and 2 were exhibited the strongest growth inhibiting activities to these bacteria. The minimal inhibitory concentrations(MIC) of immature Fomosa methanol extracts was 320 $\mu\textrm{g}$/mL against Escherichia coli 0157:H7 and 160 $\mu\textrm{g}$/mL against Staphylococcus aureus respectively. The MIC of immature Formosa methanol extracts to Salmonella typhimurium and Listeria monocytogenes were 640 $\mu\textrm{g}$/mL. These results suggest that methanol extracs of immature formosa can be used as an effective natural antimicrobial agent in food.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.24-31
• /
• 2002

The effects of vortex generators, in the form of small delta-shaped tabs or thin tapes at an axi-symmetric supersonic nozzle exit, on the characteristics of supersonic jet flowfields are investigated by Schlieren images and Pitot-tube measurements. Small tabs as small as 1 % of the nozzle exit area can introduce streamwise vortices and produce a significant effect on the jet flowfield downstream of the nozzle. The effect is stronger for the cases of under-expanded jet than over- and perfect-expanded cases, introducing a larger flow entrainment. The effects of the angle of tabs with respect to the flow direction are also investigated, and for over-expanded jet cases, it is found that the tabs bended toward upstream can weaken the interaction strength and remove the Mach disc in the jet flowfield. Introduction of small proturbances inside the nozzle surface by attachment of thin tapes is also found to change the pressure distribution in the circumferential direction of the flowfield. Its effect is also found to be dependent on the jet expansion ratio.

• Journal of Microbiology
• /
• v.37 no.2
• /
• pp.80-85
• /
• 1999

The purification system of glucoamylase (glucan 1,4-${\alpha}$-glucosidase, EC 3. 2. 1. 3), some characteristics of the purified enzyme and hydrolysis rate of various raw starch were investigated through several experiments. The enzyme was produced on a solid, uncooked wheat bran medium of Aspergillus oryzae NR 3-6 isolated from traditional Korean Nuruk. The enzyme was homogeneously purified 6.8-fold with an overall yield of 28.3% by the criteria of disc- and SDS-polyacrylamide gel electrophoresis. The molecular weight was estimated to be 48 kDa by SDS-PAGE. The optimum temperature and pH were 55$^{\circ}C$ and 4.0, respectively. The enzyme was stable at a pH range of 3.0∼10.0 and below 45$^{\circ}C$. Enzyme activity was inhibited about 27% by 1mM Hg2+. The hydrolysis rate of raw wheat starch was shown to be 17.5-fold faster than the hydrolysis rate of soluble starch. The purified enzyme was identified as glucoamylase because the product of soluble starch by the purified enzyme was mainly glucose by thin layer chromatography.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.275-278
• /
• 2000

In this study, the acoustic transducer of a thin circular disc-type with PZT/Metal was designed. The dielectric and piezoelectric properties of $0.5wt\%$ $MnO_2$ and NiO doped 0.1Pb($Mg_{1/3}$$Nb_{2/3}$)$O_3$-$0.45PbTiO_3$-$0.45PbZrO_3$ ceramics were investigated aiming at acoustic transducer applications. The vibration characteristics for the laminated circular plate was analyzed for the various thickness and diameter of the piezoceramic layer and metal layer. The acoustic characteristics which is radiated from the acoustic transducer within the finite space was simulated using the finite element method. It has been observed that the characteristics of the sound pressure ard impedance response calculated for the various models of the size and geometry of acoustic transducer.

• Journal of Korea Foundry Society
• /
• v.27 no.2
• /
• pp.88-94
• /
• 2007

General criteria for the risering design of steel castings and commercial codes for the flow and solidification analysis were used to design the optimized risering in V-process. Three type of specimens were chosen including thin plates and a thick disc. Sided riser installed in the front of a plate casting was effective to prevent the shrinkage defects and to increase the casting yield ratio. Exothennic sleeve and chill were also effective. It was possible to apply the general criteria for the risering design of steel castings to V-process. Temperature of a mold surface was expected to rise over $1,000^{\circ}C$ in the temperature calculation considering radiation effect of molten metal in the mold. Since weakening temperature of the vinyl used in V-process is about $70^{\circ}C$, it should be emphasized that a proper coating of the vinyl film is necessary to prevent the possibility of burning out of the vinyl by the molten metal.

• Journal of Power System Engineering
• /
• v.12 no.3
• /
• pp.66-71
• /
• 2008

Diamond-like-carbon (DLC) coatings could be good candidates as solid lubricants for cutting tools in dry machining of aluminum alloy. In this work, DLC thin films were produced as a friction reduction coating for WC-Co insert tip using the plasma immersion ion beam deposition (PIIED) technique. DLC coatings were also coated on $Al_2O_3$ specimens and high temperature wear tested up to $400^{\circ}C$ in dry air to observe the survivability of the DLC coating in simulated severe cutting conditions using a pin-on-disc tribotester with Hertzian contact stress of 1.3GPa. It showed reduced friction coefficients of minimum 0.02 up to $400^{\circ}C$. And cutting performance of DLC coated WC-Co insert tips to Al 6061 alloy were conducted in a high speed machining center. The main problems of built-up edge formation in aluminum machining are drastically reduced with improved surface roughness. The improvements were mainly related to the low friction coefficient of DLC to Al alloy and the anti-adhesion of Al alloy to WE due to the inertness of DLC.