• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.22-28
• /
• 2003

Antimicrobial effect of Dansham (Saliuia miltiorrhiza Bunge) was investigated. Methanol extract of dried Dansham was fractionated to hexane, chloroform, ethylacetate, butanol and aqueous fraction. Chloroform fraction showed the highest inhibitory effect on the microorganisms such as B. subtilis, S. aureus, E. coli, L. monocytogenes and V. parahaemolyticus at 250 $\mu\textrm{g}$/disc. Chloroform fraction was further fractionated by silica gel column and thin layer chromatography (TLC). The antimicrobial compound was isolated from their fractions and its chemical structure was identified as a cryptotanshinone by GC-MS and $^1$H-NMR, $^{13}$ C-NMR.

• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.375-380
• /
• 2007

Tribological properties of carbon layers produced by high temperature chlorination of SiC ceramic and DLC (diamond-like carbon) coatings produced by ion plating method were investigated and compared. Carbon coatings were produced by exposure of ball and disc type SiC in chlorine and hydrogen gas mixtures at $1200^{\circ}C$. After treatment for 10 h, dense carbon films up to $180{\mu}m$ in thickness were formed. Tribological behavior of newly developed carbon films were compared with that of DLC films. Wear resistance and frictional coefficient of the surface modified ball and disc type SiC were significantly improved compared to an untreated SiC specimen, and also the modified carbon layer had better performance than DLC coatings. Therefore, in this study, the newly developed carbon films have several advantages over existing carbon coatings such as DLC coatings and showed superior tribological performances.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.100-104
• /
• 2006

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result. the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.135-135
• /
• 2007

AgInSbTe물질은 compact disc rewritable(CD-RW)와 rewritable digital versatile disc (DVD+RW)과 같은 상변화 기록매체에 널리 쓰여지고 있다. 본 논문에서는 기존 AgInSbTe조성에 Te가 증가되었을때 변화하는 상변화 특성에 대한 연구를 수행하기 위하여 ($Ag_{3.4}In_{3.7}Sb_{76.4}Te_{16.5})x(Te)1-x$의 조성 (x=1,0.9,0.8,0.7)의 벌크 및 박막시료를 제작하였고 열증착방식을 이용하여 200nm 두께의 박막을 형성하였다. 각 박막은 질소분위기에서 100-300도 범위에 1 시간동안 열처리 하였고 XRD와 UV-ViS-NIR Spectrophotometer룰 통해 각 조성의 구조 및 광학적 특성 분석을 살시하였다. 또한 as-deposited 박막에 대하여 4-point probe를 사용하여 면저항을 측정하였고 AFM (atom force microscopy)을 통해 표면분석을 실시하였다.

• Childhood Kidney Diseases
• /
• v.25 no.2
• /
• pp.128-132
• /
• 2021

Morning glory syndrome (MGS) is a rare congenital optic disc anomaly with a characteristic fundal finding with severe visual impairment. It may occur in association with various systemic manifestations, even though most of the reported cases were isolated. A 6-year-old male visited the nephrology clinic with a history of microscopic hematuria and at the age of 12 years, he was diagnosed thin glomerular basement membrane nephropathy by kidney biopsy. After the following years, the patient had progressive deterioration of visual acuity, and diagnosed as MGS. Whole Exome Sequencing of this patient and his mother revealed heterozygous COL4A4 mutations [c.81_86del (p.Ile29_Leu30del)]. It is more reasonable to consider MGS seen in this patient as a coincidental finding of autosomal dominant Alport syndrome. To our knowledge, this case represents the first case report of autosomal dominant Alport syndrome associated with MGS.

• Advances in Traditional Medicine
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2010

The objective of the present investigation is to evaluate the antimicrobial potency of the terpenoid fractions isolated from Luffa cylindrica seeds against various pathogenic microbes. The seeds were powdered and extracted with methanol in soxhlet appratus based on phytochemical screening. Three terpenoid components were isolated by column chromatography and identified by thin layer chromatography and chemical analysis which were designated as ${LCSF_4}^*$, ${LCSF_6}^*$ & ${LCSF_8}^*$ respectively. Disc diffusion method was employed to determine the antimicrobial effectiveness of test compounds I, II and III $({LCSF_4}^*,\;{LCSF_6}^*\;&\;{LCSF_8}^*)$ against 6 microbial species viz., Staphylococcus (S.) aureus, Bacillus (B.) subtilis, Escherichia (E.) coli, Pseudomonas (P.) aeruginosa, Candida (C.) albicans and Aspergillus niger. The disc was saturated with $100{\mu}l$ of each compound, allowed to dry and introduced on the upper layer of seeded agar plate. The plates were incubated overnight at $37^{\circ}C$. Microbial growth was determined by measuring the zonal inhibition diameters. Compound I showed maximum potency against gram positive S. aureus (21 mm) in comparison with standard ciprofloxacin (38 mm), whereas the same compound was completely devoid of activity against both the fungi tested. Compound II was found to be highly sensitive against both the gram negative E. coli (20 mm) and P. aeruginosa (22 mm). Compound II was found to exhibit maximum potency against the fungi C. albicans (15 mm) and A. niger (20 mm). Compound III was found to be very effective against both the gram positive S. aureus (20 mm) and B. subtilis (15 mm) respectively.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.645-660
• /
• 1993

In this study, effects of incision of retrodiscal tissue and unilateral occlusal reduction on temporomandibular joint of rabbit were investigated. Twenty-seven adult New Zealand White Rabbits, weighing over 3.5kg, were utilized in this study. Temporomandibular joint surgery was performed in left temporomandibular joint of 24 rabbits to displace disc anteriorly through incising the retrodiscal tissue 1-2mm posterior to the disc. They were divided into two groups : twelve were left untreated after surgery, occlusal reduction was performed on left posterior teeth every 2 weeks in the other twelve rabbits, The remaining three served as the control group. The sample were sacrificed by 8, 12, and 16 weeks after surgery. Histologic examinations were performed after sacrificing them. The results were as follows : 1. Histologic findings which were manifested by flat articular fossa, broad articular surface, generalized recession of articular cartilage and sclerosis of subchondral bone were observed. These findings were similar to internal derangement. 2. In the rabbits untreated after surgery, thin cartilagenous layer and necrotic tissue were observed in 8 weeks group, calcifying cartilagenous layer was observed in 12 weeks group, and cartilagenous layer on anterior portion was observed in 16 weeks group. So, it showed gradual healing pattern into the normal tissue except displaced disc. 3. Occlusal trauma after surgery resulted in generalized recession of upper and lower articular surface. Necrosis and vertical split on condylar process of mandible were observed in 8 weeks group. Osteoclasts, exposure of subchondral bone due to erosion on upper and lower articular surface, and degenerative changes on retrodiscal tissue were observed in 16 weeks group. So, it showed continuous prowess pattern of osteoarthrosis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.822-829
• /
• 1999

Antimicrobial activity of dandelion(Taraxacum platycarpum D.) was investigated. Methanol extract of dried dandelion was fractionated to hexane, chloroform, ethylacetate, butanol and aqueous fraction. Ethylacetate fraction among these fractions showed the highest inhibitory effect on the microorganisms such as B. subtilis, L. monocytogenes, S. aureus, E. coli and V. parahaemolyticus at $500\mu\textrm{g}/disc$. Ethylacetate fraction was further fractionated into 13 fractions by silica gel column and thin layer chromatography(TLC). The results showed that ethylacetate fractions No. 4, 5 and 6 had high antimicrobial activity. These were mixed again, re separated and five fractions were obtained. Among them, No. 2 fraction had the highest inhibitory effect on the microorganisms, which was then separated into six fractions. In the 3rd fractionation, No. 3 fraction was identified as benzoic acid by HPLC, $^{1}H-NMR$ and GC MS.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.410-417
• /
• 1999

Antimicrobial activity of Plantain(Plantago asiatica L.) was investigated. Methanol extract of dried Plantain was fractionated to hexane, chloroform, ethylacetate, butanol and aqueous fraction. Ethylacetate fraction among these fractions showed the highest inhibitory effect on the microorganisms such as B. subtilis, E. coli, and V. parahaemolyticus at 500 $\mu\textrm{g}$/disc. Ethylacetate fraction was further fractionated into 8 fractions by silica gel column and thin layer chromatography(TLC). The results showed that ethylacetate fractions No. 2 and 3 had the highest anti-microbial activity. They were mixed again, re-separated, and seven fractions were obtained. Among them, No.4 and 6 fraction had the highest inhibitory effect on the microorganisms, which were then separated into four fractions. In the 3rd fractionation, No.4 fraction was identified as hexadecanoic acid by HPLC, $^1$H-NMR and GC-MS.