• 동아시아식생활학회지
• /
• 제15권6호
• /
• pp.752-758
• /
• 2005

This study examined growth and sensory characteristics of soybean sprout cultured at $25\pm1^{\circ}C$ for 4 days with distilled water(control) and green tea extract(0.03 and $0.05\%$). Initial germination rate was higher when soaking in green-tea extract than in the control. The proper concentration of green-tea extract was $0.03\%$. The growth of soybean sprout in $0.05\%$ green-tea extract was better than the control for the hypocotyl thickness and mot hair. Soybean sprout grown with green-tea extract were better than that with control inappearance, flavor, texture and over-all acceptabilitty.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.892-894
• /
• 1995

This paper deals with developmeant and application of coating thickness control system in hot dip galvanizing process. According to the line conditions, such as line speed, strip size and target coating weight, a predictive preset model sets the initial oprating conditions. Referring the zine coating informations from the gauge, mean coating value controller adjusts the chamber pressure and horizontal distance between strip and air knife, while coating deviation controller adjusts the lip gap profile of the air knife. All adaptive gains are interactively calculated by numeric models based on the theoretical analysis. The operating result with this system effectively reduces the coating deviation in transverse direction as well as in longitudinal direction.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.323-329
• /
• 2012

In this study, a rational procedures for estimation of insulation thickness of a vertical wall for condensation control or personnel protection has been investigated. Design parameters are height of the wall, thermal conductivity, emissivity, and operating temperatures. The results indicated that the surface emissivity plays a very important role in the design of insulation for the purpose of surface temperature control, especially in natural convection situation. radiation heat transfer coefficients for some new insulation material surface, such as elastomers, estimated to be more than 90% of the total surface heat transfer coefficient.

• Journal of Acupuncture Research
• /
• 제29권5호
• /
• pp.75-85
• /
• 2012

Objectives : Indirect moxibustion is one of the thermotherapy in Korean medicine and buffer of ginger and mankshood slice are common materials to be used. However it is difficult to control the power of thermal stimulation and the stimulation is greatly influenced by the characteristic of buffer. So we research on the buffer characteristic of indirect moxibustion according to the thickness, diameter and water content changes. Methods : We used thermocouples to measure temperature from surface to depth of 2, 4, 6, 8, 10, 12, 14mm on tissue model and calculated peak temperature($^{\circ}C$). The data were analyzed with student t-test and one-way ANOVA(p<0.05). Results : 1. The peak temperature of indirect moxibustion with ginger were determined by thickness of ginger slice and temperature changes according to the thickness at intervals of 1mm but according to the diameter at intervals of 4mm. 2. The peak temperature of indirect moxibustion with mankshood were determined by thickness of mankshood slice also. The peak temperature of mankshood moxibustion was higher than that of ginger moxibustion. 3. In this study, 2mm-thick-ginger slice and 3mm-thick-mankshood slice were suitable for indirect moxibustion. Variation in the thickness of which is more efficient to control the power of thermal stimulation on indirect moxibustion. 4. The more water loss we got on ginger slice, the higher peak temperature we measured at the surface of moxibustion. But the thermal stimulation was not conducted more than 2mm in the depth. 5. The thickness and water content of buffer are important in indirect moxibustion. Conclusions : The temperature of indirect moxibustion depends on the thickness of buffer than the diameter of it. Therefore, it is more efficient according to the thickness of buffer so that we control the power of thermal stimulation. And water content of buffer is one of the important factor in indirect moxibustion.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권8호
• /
• pp.287-294
• /
• 2020

다리 움직임이 몸통 주위 근육에 효과적인 변화를 줄 수 있다는 근거를 바탕으로 다리 움직임을 동반한 복부 드로우-인 방법이 뇌졸중 환자들의 배가로근 두께와 몸통 조절 능력에 변화를 알아보고, 효율적인 복부 드로우-인 기법에 있어서 임상적 기초 자료를 제공하기 위해 시행하였다. 본 연구는 뇌졸중 환자 18명을 표본 추출하여, 기존의 복부 드로우-인 기법을 적용한 집단을 실험군I(n=9)로, 다리 움직임을 동반한 복부 드로우-인 기법을 적용한 집단은 실험군II(n=9)로 무작위 배치한 후 사전 검사로 초음파를 활용하여 마비측 배가로근의 두께를 측정하였고, 몸통 조절 능력은 몸통 손상 정도 평가지를 이용하여 측정하였다. 총 4주 간, 주 4일, 1일 1회, 30분씩 중재 프로그램을 시행한 후 사후검사를 사전검사와 동일하게 재 측정하여 분석하였다. 그 결과 두 집단 내 배가로근 두께 변화 비교에서는 두 집단 모두 복부 드로우-인 동작 시 유의한 차이가 있었으며(p<0.01), 몸통 조절 능력에서도 두 집단 모두 유의한 차이가 있었다(p<0.001). 그러나 두 집단 간 배가로근 두께와 몸통 조절 능력 변화 비교에서는 몸통 조절 능력에서만 유의한 차이가 있었다(p<0.05). 따라서 집단 간 배가로근의 두께는 차이가 없었지만, 다리의 움직임을 통해 자동 반사적인 골반 움직임이 나타나 복부 주위의 근육들에게도 효율적인 수축 반응이 나타나 더 효과적으로 몸통 조절 능력을 향상시킬 수 있는 중재방법임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제6권2호
• /
• pp.58-64
• /
• 1989

Plastic instability in uniaxial tension of commercial purity Al has been studied with the emphasis of effects of thickness in cold worked specimens and recrystallized specimens. The thickness change gave rise to change in stress state and the amount of strain localization in specimen after diffuse necking. Therefore the thickness of speci- men could control modes of plastic instability. Regardless of recrystallized or cold worked state, the necking mode changed from diffuse necking to local necking, at about 1.5 .approx. 2 mm in thickness.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.46-55
• /
• 1989

Zirconia coatings are performed by the plasma spraying on the substrate of Al-Si alloy. In case of plasma sprayed ceramic coatings, it is important to control properly residual stress occurred during cooling process. Residual stress in coating layer varies with sprayed conditions and is influenced greatly by the coating layer thickness. Surface residual stress due to coating layer thickness is measured by X-ray diffraction method and the residual stress in coating layer is estimated by the deflection of coating layer when the restraint force in substrate was removed. When zirconia was coated on the substrate, tensile residual stress remains on zirconia coated surface layer. The tensile stress is increased to 0.35mm thickness and after 0.45mm thickness it is decreased abrouptly. A thick bond and composite coating reduce the zirconia surface stress and composite coating controls effectively the thick zirconia surface stress.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.422-425
• /
• 2008

Recently, electronic products and related parts are required to have thin thickness because of small form factor. To go with the trend, LGP(light guide plate) of LCD BLU(Liquid Crystal Display Back light unit: It is one of kernel parts of LCD) for cell phone has the thickness of 0.3 mm and the battery case of cell phone has 0.25 mm. Accordingly, high speed injection molding is required to make products which have thin thickness. High speed injection molding means that the resin is injected into the cavity at higher than normal speed avoiding short shot. In the case of hydro-mechanical high speed injection machine, it requires the design for hydraulic unit to make high injection speed and the design for control unit to control hydraulic unit. In the present paper, we concentrated on the molding stability of hydro-mechanical high speed injection machine to make an LGP of 0.3 mm thickness.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.20-31
• /
• 1988

This study was undertaken to investigate the load characteristics of the head-feed thresher, which may be affected by various factors such as physical properties of grain, thresher design parameters and its operational condition. The study was conducted at an initial step toward developing an automatic feed-rate control system of the head-feed thresher. A microcomputer-based data acquisition system for the load-speed characteristic of the thresher-shaft and the rail-deflection of the feeding device in accordance with a varied feeding thickness was developed. The sensors being developed and used for sensing the torque and speed of the cylinder and the power-input-shaft and the feeding thickness showed a high accuracy. A microcomputer-based data acquisition system developed in this study was assessed as adequate for a rapid acquisition and analysis of data. The effect of the feed-rate on the torque and speed of the thresher shaft, when fed intermittently by bundles, affected not by the rice varieties but by the dryness of threshing material tested. When fed by the continuous constant thickness, the torque and speed of the cylinder due to the increase of the feed-rate or feeding thickness were given by the relation by the second order parabola.

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1105-1110
• /
• 2013

In this paper, a robot arm capable of recognizing and drawing various line thicknesses is developed. Conventional line drawing robots are not capable of adjusting the thickness of lines. However, to draw faster and to enrich the expression of line drawing robots, it is necessary to adjust line thickness using a brush pen. Simple images are acquired and various line thicknesses are recognized by image processing. Trajectories of lines are generated with distance sorting using thinning and corner point detections for each label. Information on line thickness and trajectory is sent to the controller of a robot arm taking into consideration 2D inverse kinematics. Through this process, the robot arm can draw various lines thicknesses along 2D trajectories with 3 motors. Robot arm for detailed drawing will be studied in the future.