• 한국의학물리학회지:의학물리
• /
• 제5권1호
• /
• pp.13-24
• /
• 1994

고속촬영이 요구되는 일반적인 적외선 촬영시스템에서는 고속 광주사기에 적외선 광다발을 입력시키기 위해 고가이면서 가공이 어려운 적외선대역 렌즈를 사용하고 있다. 본 논문에서는 고속 촬영이 요구되지 않고 0.1$^{\circ}C$이하의 온도분해능이 크게 요구되는 의료용 적외선 체열촬영 시스템을 저가이면서 가공이 용이한 반사경을 이용한 광학계를 써서 구현하는 방법을 결과와 함께 제시하였다. 적외선 체열촬영시스템은 인체의 표피에서 복사되는 적외선의 양을 계측하여 인체의 표피 온도분포를 2차원 영상으로 보여준다. 구현한 적외선 체열촬영시스템으로 실험한 결과 영상의 화소수를 256$\times$240으로 하고 촬영시간을 4초로 했을 때 온도분해능이 0.1$^{\circ}C$이하인 것을 확인하였다. 인체의 여러 부위에 대한 체열 영상을 시각적으로 잘 보이게 하기 위해 16가지색으로 의사색체화를 하여 예시하였다.

• 한국원적외선협회보
• /
• 통권8호
• /
• pp.27-31
• /
• 2001

• 한국음향학회지
• /
• 제38권6호
• /
• pp.621-629
• /
• 2019

염분의 변화가 심한 황해의 해양환경 조건에서 정확한 해수음속을 산출하기 위한 논리적 방안을 제시하였다. 본 방안은 미항공우주국에서 개발한 Aqua 및 Soil Moisture Active Passive(SMAP)위성자료를 기반으로 하계절 30.5 psu 미만의 저염분수의 확장과 수온역전 현상 발생 위치를 식별하고 그 위치에 수심별 수온염분 측정센서인 Conductivity, Temperature, and Depth(CTD)가 탑재된 해양관측용 무인체계를 투입하여 음속이 적재적소에 정확히 측정하는 방안을 제시하였고 이의 원활한 수행을 위한 흐름도(flow chart)로 정리하였다. 본 방안을 통하여 염분의 변화폭이 증대되는 특이 해양환경을 조기에 식별하여 소모성 연직 수온 측정기인 Expandable Bathy Thermograph (XBT)로 음속을 계산할 때 정확도의 저하가 발생 되지 않도록 하였다.

• 대한통합의학회지
• /
• 제3권3호
• /
• pp.25-33
• /
• 2015

Purpose : The purpose of this study was to find out objective and scientific grounds on the effect of Spiral Balanced Taping(SBT) by examining physiological change according to pain reduction and understanding the relationship physiological change and pain. Method : 32 female students who was from 20 to 25 years old($22.06{\pm}1.13$). Regarding the range of pain, each 16 female students ranged in the right and the left. The subjects selected the most comfortable method of six taping methods related with trapezius. They were examined with four measurement methods(Visual Analogue Scale : VAS, Algometer, Digital Infrared Thermograph Imaging(DITI), and Cervical Range of motion : CROM) and measured before treatment, right after treatment, 30 minutes later after treatment and 60 minutes later after treatment. Result : According to the result of Repeated measure ANOVA, there was a significant difference with all four methods before and after treatment. In addition there was a significant difference in proportion to time. As a result of stepwise regression, VAS was the highest with Digital Infrared Thermograph Imaging(r2=0.136) and pressure pain threshold was the highest in the range of cervical motion. Conclusion : There was the effect of SBT to all four measurement method and it was effective with measuring VAS and DITI, or Algometer and CROM together.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.145-150
• /
• 2010

Thick films of carbon fiber were prepared by a heating element of plan shape made in Darin co., We have investigated surface morphology of the specimen depending on heat-treatment temperatures. Scanning electron microscope(SEM) image of carbon fiber thick films of the specimen heat treated shows a grain growth at $1200^{\circ}C$ and becomes a poly-crystallization at $1350^{\circ}C$. The variation of resistivity at the thermally annealed specimen above $600^{\circ}C$ depends on type of the substrates. It may be due to a variation of film thickness and a difference of interfacial phenomena. A heating element of features was affected significantly by skin blood and quantity of heat of the body physiological function. After radiation of farinfrared for plate heating element, the function of biometric physiological is considered of skin blood flow and calorie which greatly affects on individuals. Electromagnetic wave was not influence on the body.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집
• /
• pp.1-2
• /
• 2008

Thick films of Carbon fiber were prepared by a heating element of plan shape made in Darin co.. We have investigated surface morphology of the specimen depending on second heat-treatment temperatures. X-ray diffraction patterns of Carbon fiber thick films show that the specimen heat treated below $600^{\circ}C$ was an amorphous phase and the one heat treated above $1100^{\circ}C$ forms a poly-crystallization. Scanning electron microscope(SEM) image of Carbon fiber thick films of the specimen heat treated in between 900 and $1100^{\circ}C$ shows a grain growth. At $1100^{\circ}C$, the specimen stops grain-growing and becomes a poly-crystallization.

• Journal of Acupuncture Research
• /
• 제30권1호
• /
• pp.71-80
• /
• 2013

Objectives : This study aimed to investigate the difference of abdominal skin temperature responses following moxibustion comparing stimulation method. Methods : Moxibustion was applied on the acupuncture points of $CV_4$, $CV_6$, $CV_{12}$. Thirty healthy men were randomly divided into two groups, one receiving a single moxibustion stimulation in three locations '$CV_4{\cdot}CV_6{\cdot}CV_{12}$'(n=15) and the other receiving triple moxibustion stimulations in one location '$CV_{12}$'(n=15) for 30 min. To obtain the skin temperature on abdominal region, a thermograph was used. Three arbitrary frames(the upper abdominal, lower abdominal, whole abdominal regions) were made to analyse skin temperature. Thermographic images were obtained at before and after the procedure of indirect moxibustion and 5, 10, 15, 20, 25, 30 min afterwards. Results : An increase in skin temperature on the three abdominal regions was observed following both one point and three points moxibustion administrations. Significant increase in skin temperature of the whole abdominal region was observed at 30 min after the procedure of three points moxibustion compared with one point moxibustion stimulation. A tendency of skin temperature changes over time was observed. Conclusions : In this study, skin temperature of lower abdominal region does not increase after triple moxibustion stimulations on $CV_{12}$. Administration of single moxibustion on $CV_4$, $CV_6$, $CV_{12}$ makes greater changes in skin temperature on the whole abdominal region than triple moxibustion on $CV_{12}$.

• 한국음향학회지
• /
• 제42권1호
• /
• pp.16-24
• /
• 2023

해수의 염분은 수중 음속 산출에 있어 영향을 적게 미치는 변수로 알려져 있다. 본 연구는 여름철 양쯔강(장강) 희석수가 동중국해로 확장하는 과정에서 양쯔강 하구 인근 해수의 저염분이 음속의 수직구조에 어떻게 영향을 미치는지를 파악하였다. 음속 산출에 활용된 염분을 관측치와 고정값으로 구분 후 각각의 음속을 비교한 결과, 양쯔강 희석수의 영향으로 염분약층이 수온약층보다 강하게 형성되는 경우 음속이 상이하게 나타났다. 또한, 음원을 수온약층의 중간 심도에 위치하여 음선경로를 추적한 결과 염분약층이 강한 경우 고정된 염분으로 계산된 음속에서는 확인되지 않는 수중음파통로가 나타났다. 이러한 결과를 바탕으로 본 연구는 여름철 저염분수에 의한 강한 염분약층이 형성된 조건에서 음속 산출 시 Expandable Bathy Thermograph(XBT)보다는 실제 염분이 고려된 관측기기인 Expendable Conductivity Temperature Depth(XCTD)와 Expendable Sound Velocimeter(XSV)의 활용이 중요함을 제시한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.282-282
• /
• 2010

LED Device was designed of electronic circuits of electrical power part for used Pspice student version and used Infrared LED lamps of load part. LED was used Computerized Electronic Medical Infrared Thermographic Imaging System for body surface Investigation of variable Body thermal asymmetry. It was knowledge body thermal Asymmetry of body surface and quantity body surface of electromagnetic wave to inflow electrical power part.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.72-77
• /
• 2008

The application of infrared thermography for detecting defects under the surface of a material was studied. Defects in a specimen were made by back-drilled circular holes. To get alarge temperature difference at the surface, a halogen lamp was used for surface heating. We confirmed that the defect location had a good relationship with the maximum temperature difference. The sizes of the defects could be calculated by means of the FWHM. The value of the FWHM of a temperature difference decreased with time. Therefore in an extremely short time after the heating, the true defect size could be measured.