• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.2
• /
• pp.127-132
• /
• 2014

The effect of thermal pretreatment conditions on hydrolysis characteristics of dairy manure and sawdust mixtures has been evaluated. Thermal pretreatment temperature varied between 35 and $120^{\circ}C$ and the period of the treatment changed between 30 and 1440min (24h). As thermal pretreatment temperature and duration increased, organic material solublization rates were improved. Maximum solubilizations of chemical oxygen demand (SCOD), carbohydrates, and volatile fatty acids(VFAs) were observed when dairy manure treated for one day at $120^{\circ}C$. Although one day treatment duration at $120^{\circ}C$ showed the highest SCOD, soluble carbohydrates, and VFAs concentration, its hydrolysis rate was only about 12%. The results reveal that the thermal pretreatment conditions tried in this study are not enough to solubilize the organic matter contained in dairy manure and sawdust mixtures. In order to maximize hydrolysis performance, the further research needs to determine the factors influences on organic material solubilization in addition to thermal pretreatment temperature and duration.

• Journal of Environmental Science International
• /
• v.31 no.7
• /
• pp.609-616
• /
• 2022

In this study, the effect of different reaction times for thermal-alkaline pretreatment on the solubilization and biogasification of polyhydroxybutyrate (PHB) were evaluated. Thermal-alkaline pretreatment tests were performed at 73 ℃ and pH 13 at 0-120 h reaction times. The mesophilic anaerobic batch tests were performed with untreated and pretreated PHB samples. The increase in the pretreatment reaction time results in a 52.8-98.8% increase of the abiotic solubilization efficiency of the PHB samples. The reaction time required to achieve solubilization efficiencies of 50%, 90%, and 95% were 10.5, 52.0, and 89.6 h, respectively. The biogasification of the untreated PHB samples achieved a specific methane production rate of 3.6 mL CH₄/g VSS/d and require 101.3 d for complete biogasification. The thermal-alkaline pretreatment significantly improved specific methane production rate (10.2-16.0 time increase), lag time (shortened by 76-81%), and time for complete biogasification (shortened by 21-83%) for the biogasification of the PHB samples when compared to those of the untreated PHB samples. The improvement was higher as the reaction time of the thermal-alkaline pretreatment increased. The findings of this study could be used as a valuable reference for the optimization of the biogasification process in the treatment of PHB wastes.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.117-126
• /
• 2000

Solubilization pretreatments were conducted to enhance the anaerobic digestion of the waste activated sludge. Four pretreatment techniques including heating, sonication freezing and thawing, and enzyme addition were employed to solubilize the waste activated sludge under various conditions. Thermal pretreatment by heating showed the highest efficiency compared with other methods, and freezing and thawing was confirmed as a feasible alternative of solubilization as well as the pretreatment of dewatering. There is a clear correlation between the solubilization efficiency of the waste activated sludge and the gas production. Batch digestion results showed the cumulative gas production as much as four times after thermal pretreatment as compared with that by the control sludge without pretreatment. As a result, hydrolysis or solubilization pretreatment might play a significant role in the high rate digestion of the waste activated sludge.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.110-116
• /
• 2016

Biogas yields point of view, the possibility of reusing excess sludge treated by thermal pretreatment for the purpose of improving the efficiency of the anaerobic digestion process has been investigated in recent year. Thermal pretreatment technology was considered as a pretreatment technique to improve excess sludge properties because of the solubilization of particulate organics. As a view point of sludge reduction and recycle, however, many researchers focused on the ability of particulate hydrolysis and COD solubilization under a high temperature, and few reports have addressed on the physical/chemical characteristics changing. This research was performed to evaluate the effects of a various temperature and chemical additives on carbon formation and fractionation in treated slurry from thermal pretreatment. Based on the results, it was revealed that oxidants injection and temperature changing have significantly caused the change of carbon fractions in slurry from thermal pretreament. Especially, it was considered that the efficiencies of particle hydrolysis increased with the increase of the reaction temperature. Low molecular weight(Mw < 350 g/mol) organic carbon formation increased with the increase of oxidants injection. It was expected that results of this research will provide an overview of the characteristics of thermal pretreatement for excess sludge reduction and recycle.

• Environmental Engineering Research
• /
• v.16 no.2
• /
• pp.103-109
• /
• 2011

This work experimentally determined the effect of thermal and microwave pretreatments on the anaerobic digestion of mixtures of municipal primary and secondary sludges in semi-continuous mesophilic digesters at hydraulic retention times (HRT) of 20, 15, 10, 7, and 5 days. The ratio of soluble chemical oxygen demand (COD) to total COD in thermally pretreated and microwaved sludges at $80^{\circ}C$ was 2.7 and 3.2 times higher than that of raw sludge, respectively. The volatile solids (VS) and COD removal efficiencies in all three digesters fed with raw (control), thermally pretreated (TM), and microwaved (MW) sludges decreased as the HRT was reduced. The highest relative improvement in VS removal compared to the control occurred at the HRT of 5 days in the TM and MW (29 and 41% higher than the control, respectively). At this HRT, improvement in the COD removal efficiencies in the TM and MW compared to the control was 28 and 53%, respectively. Improvements in biogas production compared with the control increased in both the TM and MW as the HRT was reduced to 5 days. The relative improvement in daily biogas production compared to the control from the TM and MW was 33 and 53% higher than the control at the HRT of 5 days, respectively. The results show that microwave pretreatment is more effective than thermal pretreatment in increasing the solubilization degree and mesophilic anaerobic biodegradability of sewage sludge.

• Journal of Industrial Technology
• /
• v.39 no.1
• /
• pp.7-14
• /
• 2019

Carbon nanotubes (CNT) on metal substrates are definitely beneficial because they can maintain robust mechanical stability and high conductivity between CNT and metal interfaces. Here, we report direct growth of CNT on Ni-based superalloy, Inconel 600, using thermal chemical vapor deposition (CVD) with acetylene feedstock in the growth temperature range of $400-725^{\circ}C$. Furthermore, we studied the effect of substrate pretreatment on the growth yield enhancement and growth temperature decrease of CNT on Inconel 600. Activation energy (AE) for CNT growth was estimated from the CNT height change with respect to the growth temperature. The AE values significantly decreased from 205.03 to 24.35 kJ/mol by the pretreatment of thermal oxidation of Inconel substrate at $725^{\circ}C$ under ambient. Higher oxidation temperature tends to have lower activation energy. The results have shown the importance of pretreatment temperature on CNT growth yield and growth temperature decrease.

• International Journal of Oral Biology
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2017

In the present study, we investigated the role of peripheral ionotropic receptors in artemin-induced thermal hyperalgesia in the orofacial area. Male Sprague-Dawley rats weighting 230 to 280 g were used in the study. Under anesthesia, a polyethylene tube was implanted in the subcutaneous area of the vibrissa pad, which enabled drug-injection. After subcutaneous injection of artemin, changes in air-puff thresholds and head withdrawal latency time were evaluated. Subcutaneous injection of artemin (0.5 or $1{\mu}g$) produced significant thermal hyperalgesia in a dose-dependent manner. However, subcutaneous injection of artemin showed no effect on air-puff thresholds. IRTX ($4{\mu}g$), a TRPV1 receptor antagonist, D-AP5 (40 or $80{\mu}g$), an NMDA receptor antagonist, or NBQX (20 or $40{\mu}g$), an AMPA receptor antagonist, was injected subcutaneously 10 min prior to the artemin injection. Pretreatment with IRTX and D-AP5 significantly inhibited the artemin-induced thermal hyperalgesia. In contrast, pretreatment with both doses of NBQX showed no effect on artemin-induced thermal hyperalgesia. Moreover, pretreatment with H-89, a PKA inhibitor, and chelerythrine, a PKC inhibitor, decreased the artemin-induced thermal hyperalgesia. These results suggested that artemin-induced thermal hyperalgesia is mediated by the sensitized peripheral TRPV1 and NMDA receptor via activation of protein kinases.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.2
• /
• pp.89-97
• /
• 2007

In this study, thermalpretreatment was used to solubilize organic matter contained in sewage sludge before acid fermentation. By thermal pretreatment, solubilization of particulate CODcr, carbohydrate and protein increased. By thermal treatment at $120^{\circ}C$ for 30 minutes, CODcr solubilization efficiency of the primary sludge reached 8.3%. Meanwhile, for the secondary sludge, CODcr solubilization efficiency reached 16.5% because of high solubilization ratio of protein under the same pretreatment conditon. The results of anaerobic biodegradability test showed that both VFAs conversion ratio and hydrolysis rate of organic compounds in sewage sludge were improved by thermal pretreatment. Meanwhile, the optimum thermal pretreatment condition was varied with composition of organic compounds in sludge. In this study, the optimun thermal pretreatment condition of the primary sludge, containing high concentration of carbohydrate, was $80^{\circ}C$ for 30 minutes. Meanwhile, for the secondary sludge, mainly composed of protein, the sludge treated at $120^{\circ}C$ for 30 minutes showed the effective organic removal and VFAs production.

• KSBB Journal
• /
• v.28 no.6
• /
• pp.366-371
• /
• 2013

Ethanol productions were performed by separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) processes using seaweed, Enteromorpha intestinalis (sea lettuce). Pretreatment conditions were optimized by the performing thermal acid hydrolysis and enzymatic hydrolysis for the increase of ethanol yield. The pretreatment by thermal acid hydrolysis was carried out with different sulfuric acid concentrations in the range of 25 mM to 75 mM $H_2SO_4$, pretreatment time from 30 to 90 minutes and solid contents of seaweed powder in the range of 10~16% (w/v). Optimal pretreatment conditions were determined as 75 mM $H_2SO_4$ and 13% (w/v) slurry at $121^{\circ}C$ for 60 min. For the further saccharification, enzymatic hydrolysis was performed by the addition of commercial enzymes, Celluclast 1.5 L and Viscozyme L, after the neutralization. A maximum reducing sugar concentration of 40.4 g/L was obtained with 73% of theoretical yield from total carbohydrate. The ethanol concentration of 8.6 g/L of SHF process and 7.6 g/L of SSF process were obtained by the yeast, Saccharomyces cerevisiae KCTC 1126, with the inoculation cell density of 0.2 g dcw/L.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1336-1341
• /
• 2009

Quantitative changes in functional constituents of waxy corn (Zea mays L.) by 5 different thermal pretreatments, including roasting, steaming, microwave, puffing, and extruding, were determined and compared with those of the raw waxy corn. There were no significant differences in fatty acid compositions among the corn treated with 5 thermal treatments. Levels of $\alpha$- and $\gamma$-tocopherols, soluble amino acids, and phytosterols decreased by thermal treatments, while those of p-coumaric and ferulic acids considerably increased by thermal treatments. In particular, the contents of tocopherols and phytosterols, and souble amino acid decreased significant in the steaming and puffing processes, respectively, whereas those of 2 free cinnamic acids increased significantly in the steaming and puffing processes. The extruding process showed smaller quantitative changes in tocopherols, phytosterols, and hydroxycinnamic acid derivatives compared to other heat pretreatments. These results suggest that the extruding process have a positive effect on valuable phytochemicals in waxy corn.