• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.315-326
• /
• 2017

In this work, thermoelastic dynamic behavior of functionally graded carbon nanotube reinforced composite (FG-CNTRC) cylinders subjected to mechanical pressure loads, uniform temperature environment or thermal gradient loads is investigated by a mesh-free method. The material properties and thermal stress wave propagation of the nanocomposite cylinders are derived after solving of the transient thermal equation and obtaining of the time history of temperature field of the cylinders. The nanocomposite cylinders are made of a polymer matrix and wavy single-walled carbon nanotubes (SWCNTs). The volume fraction of carbon nanotubes (CNTs) are assumed variable along the radial direction of the axisymmetric cylinder. Also, material properties of the polymer and CNT are assumed temperature-dependent and mechanical properties of the nanocomposite are estimated by a micro mechanical model in volume fraction form. In the mesh-free analysis, moving least squares shape functions are used to approximate temperature and displacement fields in the weak form of motion equation and transient thermal equation, respectively. Also, transformation method is used to impose their essential boundary conditions. Effects of waviness, volume fraction and distribution pattern of CNT, temperature of environment and direction of thermal gradient loads are investigated on the thermoelastic dynamic behavior of FG-CNTRC cylinders.

• 한국광학회지
• /
• 제14권1호
• /
• pp.44-50
• /
• 2003

반도체 레이저 측면 여기시 Nd:YAG 레이저 매질에서 발생하는 열영향에 대해 분석하였다. 열영향을 고감도로 측정하기 위해 편광자와 Nd:YAG 매질 사이에 λ/4판을 삽입하여 여기 파워에 따라 발생하는 depolarization양을 측정하였다. CCD로 는 열영향에 의한 매질 내에서의 탐침광 분포 변화를 측정하고 해석하여 반도체 레이저 측면 여기시 발생하는 열영향을 최소화하기 위한 공진기 설계의 효과적인 방법을 제시하였다.

• Composites Research
• /
• 제15권5호
• /
• pp.27-34
• /
• 2002

본 연구의 목적은 (주)한국와이바의 CF3327 평직 복합재료의 열전도도를 실험적으로 계측하고 이를 이론적인 예측과 비교하는데 있다. 열전도도 계측을 위하여 비교계측법의 원리를 이용한 실험 장치를 제작하였으며 열전도도가 잘 알려진 그라파이트를 실험함으로써 장비의 정확성을 확인하였다. 미시역학적인 방법은 섬유 및 기지의 물성, 섬유체적비, 직조 형태 등의 변수들이 복합재료의 유효물성치에 미치는 영향을 평가하는데 유용하다. 본 연구에서는 3차원 직-병렬 열저항 개념을 주기적으로 반복되는 평직의 단위구조에 적용하여 열전도도를 예측하였다. 해석 결과를 실험 결과와 비교한 결과 잘 일치함을 확인하였고 섬유체적비가 에폭시 수지 복합재료의 열전도도에 미치는 영향을 고찰하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.869-872
• /
• 2003

The thermal contamination of the Younggwang coastal marine ecosystem has been investigated using space borne thermal infrared data acquired over the period 1985-2003 by the Landsat and NOAA satellites. The analysis of AVHRR data brought out the general pattern and extension of thermal plume while TM data yielded more accurate information about the plume shape, dimension, dispersion direction etc. The examination of sea surface temperature (SST) computed from these images clearly indicates that the thermal plume extends 70 to100km southward during summer and 50 to70km northwestward during winter monsoons. The maximum plume temperature was 29$^{\circ}C$ in summer and 12$^{\circ}C$ in winter. The comparative analysis shows that the temperature retrieved from TM is slightly higher (1.8$^{\circ}C$, 3$^{\circ}C$ and 2.2$^{\circ}C$ for the images of 98/11/10, 99/05/05 and 99/05/21 respectively) than those derived from AVHRR data. The correlation coefficient between the TM-derived SST and AVHRR-derived SST was 0.72.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.90-98
• /
• 2007

본 연구의 목적은 고장 케이블(LV URD(low voltage underground) cable)의 원인을 밝히는데 있다. 분석방법은 외형패턴, 열패턴, 표면구조 분석, 열분석, 성분분포 등 다양한 분석기기를 이용하여 분석되었다. 국제기준과 사고케이블 제작회사가 제시하고 있는 규정이 일치하는지의 여부를 분석하였으며, 국내산 케이블과의 비교분석하였다. 그 내용을 요약하면 다음과 같다. (1) 사고케이블 자체의 절연성능을 저하시키는 요인으로 IEC 60502-1과 IEC 60811-1-1에 의한 절연피복의 최소 두께가 시방(specification)과 일치하지 알음을 확인하였다. (2) 적외선분광기에 의해 적외선흡광피크가 동일 재료에서 일치하지 않는 것으로 나타났다. (3) PVC bedding 부분이 열적으로 취약하여 장시간 현장에 노출되어 사용되는 경우 이와 유사한 패턴의 사고를 유발할 것으로 판단된다.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.69-73
• /
• 2013

The purpose of this paper is to analyze the carbonization pattern and operation characteristics of an MCCB. The MCCB is consisted of the actuator lever, actuator mechanism, bimetallic strip, contacts, up and down operator, arc divider or extinguisher, metal operation pin, terminal part, etc. When the actuator lever of the MCCB is at the top or the internal metal operation pin is in contact with the front part, the MCCB is turned on or off. It means trip state if the actuator lever or the internal metal operation pin moves to back side. In the UL 94 vertical combustion test, white smoke occurred from the MCCB when an average of 17~24 seconds elapsed after the MCCB was ignited and black smoke occurred when an average of 45~50 seconds elapsed. It took 5~6 minutes for the MCCB surface to be half burnt and took an average of 8~9 minutes for the MCCB surface to be entirely burnt. In the UL 94 test, the MCCB trip device operated when an average 7~8 minutes elapsed. If the MCCB trip has occurred, it may have been caused by an electrical problem such as a short-circuit, overcurrent, etc., as well as fire heat. From the entire part combustion test according to KS C 3004, it was found that the metal operation pin could be moved to the MCCB trip position without any electrical problems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권4호
• /
• pp.487-493
• /
• 2003

More reliable design of thermal transport. Power acquisition and thermal management systems requires the through understanding of the flow hydrodynamic. the differences and similarities between the two-phase flow characteristics of two-Phase flow influenced by the gravity levels. The data of flow Patterns, void fraction, frictional pressure drop associated with their characteristics were obtained at $\mu\textrm{g}$. 1g and 2g. Flow patterns and void fraction data obtained at three gravity levels were compared with each other and previous models and correlations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.323-324
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.307-308
• /
• 2007

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2050-2054
• /
• 2007

This study numerically and experimentally investigated on thermal strain analysis of aluminum alloy casting mold using metal foundry. To predict the numerical result of thermal strain in Al alloy casting mold during the cooling process, it is performed the investigation of temperature distribution, stress and displacement based on the physical properties of Al alloy. In results of this study, Al alloy casting mold represented rapidly cooling graph during initial 20minutes after beginning cooling process, therefore value of stress and displacement is rapidly changed during initial 20minutes after beginning cooling process. In addition to, temperature distribution obtained by experiment confirmed corresponding pattern then compared numerical analysis with experiment. These results are distribute to make the effective and the high precision casting mold.