• International Journal of Aeronautical and Space Sciences
• /
• 제6권1호
• /
• pp.61-70
• /
• 2005

The currently developed propulsion system(PS) is composed of propellant tank, valves, thrusters, interconnecting line assembly and thermal hardwares to prevent propellant freezing in the space environment. Comprehensive engineering analyses in the structure, thermal, flow and plume fields are performed to evaluate main design parameters and to verify their suitabilities concurrently at the design phase. The integrated PS has undergone a series of acceptance tests to verify workmanship, performance, and functionality prior to spacecraft level integration. After all the processes of assembly, integration and test are completed, the PS is integrated with the satellite bus system successfully. At present, the severe environmental tests have been carried out to evaluate functionality performances of satellite bus system. This paper summarizes an overall development process of monopropellant propulsion system for the attitude and orbit control of LEO(Low Earth Orbit) observation satellite from the design engineering up to the integration and test.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.121-129
• /
• 2008

고경도, 고광택, 고내마모성 및 고내산성 등의 물성이 요구되는 마루바닥재의 상도용 도료로는 물성이 우수하면서도 환경친화적인 자외선경화형 도료가 많이 사용되고 있다. 그 중에서도 특히 에폭시 아크릴레이트계의 올리고머는 높은 열안정성과 속경화 특성으로 인하여 목재내장재의 도료로써 많이 사용되고 있다. 본 연구에서는 아크릴레이트 관능기 수가 자외선 경화형 에폭시 아크릴레이트 도료의 열안정성 및 표면경도에 미치는 영향을 분석하고자 하였다. 조성분을 이루는 모노머, 올리고머, 광개시제 각각의 열분해 거동 및 아크릴레이트 관능기수가 달리 배합된 에폭시 아크릴레이트 도료의 열안정성을 열중량분석기(TGA)를 사용하여 평가하였으며, 열안정성과 물리적 물성과의 관계를 확인하기 위하여 진자경도계를 이용하여 표면경도를 측정하였다. 경화 전 후의 열분해 거동 및 표면경도를 비교한 결과, 자외선 경화 중에 발생하는 가교에 의해 도막의 열안정성이 부여되며, 관능기의 수가 많아짐에 따라 열안정성뿐만 아니라 표면경도도 향상됨을 확인하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권4호
• /
• pp.392-398
• /
• 2005

This paper presents technologies that have strategic importance in future motor drives. The underlying strategic issue for motor drives is maintaining cost while increasing certain dimensions of functionality. The dimensions of functionality which should increase include reliability and added value features such as providing continuous energy optimization, providing sensing of the driven system suitable for application specific diagnostic purposes, and providing continuously optimal thermal utilization of the capability of the drive. This paper will address each of these issues and discuss the technology status for each case, with a focus on research needed to fully deliver the needed functionality.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.696-701
• /
• 2018

This study is carried out to evaluate the commercial feasibility of the room temperature and thermal polymerization method as a lens manufacturing method. All samples are found to be transparent after polymerization, thereby indicating that their physical and surface properties are suitable for hydrogel ophthalmic lenses. The optical and physical properties of the lenses are compared. The water content of the samples that are prepared via a room temperature polymerization process decreases with the addition of MMA as compared to the water content of the samples that are prepared via thermal polymerization. When MMA and DMA are used as an additive for improving functionality, the wettability of the lenses increases. By measuring the AFM, the surface roughness is shown to improve more than MMA and DMA. Therefore, it is judged to be an appropriate process for manufacturing hydrogel lenses with high functionality.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.50-57
• /
• 2009

Heliostat in the tower type solar thermal power plant is a mirror system tracking the sun's movement to collect the solar energy and it is the most important subsystem determining the efficiency of solar thermal power plant. Thus a good performance of it, which is mostly the accurate sun tracking performance under the various hazardous operating condition, is required. Heliostat control system is a system to manage the heliostat sun tracking movement and other operations. It also communicates with the master controller through the heliostat filed control system to receive and send the informations required to operate the heliostat as a part of the solar thermal power plant. This study presents a heliostat control system designed and developed for the 1MW solar thermal power plant. We first define the functionality of heliostat control system. Then sun tracking controller as well as the sun tracking algorithm satisfying the required functionality have been developed. We tested the developed heliostat control system and it showed a good performance in regulation of heliostat motion and communication.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.954-960
• /
• 2014

This study surveyed high school girls in the Busan, Ulsan, and Gyeongnam areas to study how they wear school uniforms along with their satisfaction levels and demands in regards to functional school uniforms. This study presents data on the requirements for the development of winter school uniforms for high school girls with improved warmth functions. The findings are: First, high school girls purchased school uniforms of different brands and the purchase rates for three brands were 25% to 30% approximately. Most of them spent more than 300,000 KRW and less than 400,000 KRW on school uniforms purchases. Second, the greatest complaints by students about winter school uniforms were the ability to conduct routine activities and poor thermal insulation. The most popular bottom underwear for girls was underpants and leggings. The most popular top underwear was half-sleeved round neck t-shirts and running shirts. Third, a survey about uniform functionality showed that most students used and 'arm pit sweat absorbing pad', 'Waist size adjusting function, and 'inside pockets with zippers'. Satisfaction with functional uniforms was low: less than 3.5 in all questions. Fourth, students were favorable to develop functional uniforms to keep warm in the winter. The bottom needs to be warmer than the top and it is necessary to keep legs warm, especially the thighs and calves.

• 공업화학
• /
• 제16권3호
• /
• pp.342-347
• /
• 2005

하이퍼브랜치 폴리올(HBP-16, 32, 64)과 acrylic acid로부터 광경화형 하이퍼브랜치 아크릴레이트를 합성하였고, 그 물성을 조사하였다. TGA로 측정한 UV 경화필름의 열안정성은 관능기 수가 증가할수록 좀더 높은 온도로 이동하였다. 또한 아크릴 레이트의 관능기 수가 증가할수록 경도, 내마모성, 인장강도가 우수하였으며, 내후성 테스트에서는 아크릴레이트의 관능기수가 증가할수록 황변 지수 값이 증가하는 결과를 보여주었다.

• 공업화학
• /
• 제16권1호
• /
• pp.101-106
• /
• 2005

Dipentaerythritol 유도체(DPET)와 acrylic acid를 반응하여 6관능 광경화형 변성 폴리아크릴레이트(PA-1)를 제조하였으며, dipentaerythritol 유도체(DPET)에 trimellitic anhydride와 glycidyl methacrylate를 반응시켜 12관능 광경화형 변성 폴리메타아크릴레이트(PA-2)를 제조하고 경화된 물성을 조사하였다. 관능기 수가 증가할수록 중량 평균 분자량은 증가하였으며, TGA (Thermogravimetric Analyzer)로 측정한 UV 경화필름의 열안정성은 (메타)아크릴레이트의 관능기 수가 많을수록 증가하였다. 또한 (메타)아크릴레이트의 관능기 수가 많을수록 경도, 내마모성, 인장강도가 우수하였으며, 내후성 테스트에서는 (메타)아크릴레이트의 관능기 수가 많을수록 황변 지수 값인 yellow index 값이 높아지는 결과를 보여주었다.

• 한국포장학회지
• /
• 제24권1호
• /
• pp.27-34
• /
• 2018

In this work, nano ZnO was introduced into low density poly ethylene (LDPE) composites films with various contents (0, 0.5, 1.0, 3.0 and 5.0 wt%) by melt-extrusion. Their basic properties such as crystallinity, chemical bonds and surface morphology were examined by XRD, FTIR and SEM. XRD patterns and FTIR peaks intensity were increased in proportion to the ZnO contents. SEM images showed well dispersed nano ZnO in LDPE composite films. Antimicrobial functionality of LDPE-nano ZnO composite films was also studied and the presence of nano ZnO resulted in significant improvement of antimicrobial functionality compared to the pure LDPE film. To evaluate influence of nano ZnO on LDPE properties required as packaging material, thermal, mechanical, gas barrier and optical properties of LDPE-nano ZnO composite films were characterized with various analytical techniques including TGA, UTM, OTR, WVTR and UV-Vis spectroscopy. As a result, except optical and mechanical properties of LDPE, no significant effects were found in other properties. Opacity of pure LDPE was greatly increased with increasing concentration of nano ZnO and tensile strength was also improved at 0.5wt% ZnO content.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.77-82
• /
• 1999

탄소 fabric 표면을 각기 다른 농도의 인산용액으로 표면처리함으로써 2-D 카본/페놀릭 복합 재료에 미치는 물성과 내 산화성, Arc plasma Torch test를 통하여 내열성등을 알아보았으며 ESCA를 통하여 인산 표면 처리에 의한 표면 functionality를 측정하였다.