• The Journal of the Petrological Society of Korea
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2008

The metasedimentary rocks of the Nampo Croup consisting of metaconglomerates, metasandstones, phyllites are exposed in the area of the Daechcon beach and Maryangri, Seocheon-gun. Their typical metamorphic assemblages of Bt-Mus-Grt-Qtz (${\pm}Pl{\pm}Chl$) and Bt-Mus-Qtz (${\pm}Pl{\pm}Chl$) indicate that they have been under intermediate P/T type metamorphism and were metamorphosed to garnet zone grade of amphibolite-facies during the Daebo Orogeny. Pressure-temperature conditions of peak metamorphism estimated from geothermobarometries are $560{\sim}595^{\circ}C$, $6.9{\sim}8.2\;kb$ respectively. The results of K-Ar biotite age determination are $143.2{\pm}3.6\;Ma$, $122.6{\pm}2.4\;Ma$ and $124.8{\pm}2.4\;Ma$ and the last two ages are considered as the results of later-stage thermal perturbation. On the bases of the formation age of Daedong Supergroup of $187{\sim}172\;Ma$ (Han et al., 2006; Jeon et al., 2007) combined with the results of this study, the hypothetical model of tectonometamorphic evolution of the study area during Daebo Orogeny is proposed. Crustal thickening resulted from folding and duplexing of thrusts in the area initiated at around 175 Ma just after sedimentation of Nampo Croup. And then rapid cooling by normal faulting due to crustal extention followed immediately after the peak metamorphism to the closure temperature of biotite.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.371-376
• /
• 2012

This study was conducted to predict the hatching time of eggs of Lycorma delicatula, to select an effective environmentally-friendly agriculture material (EFAM) and to evaluate the attraction effect of brown sticky traps for controling of Lycorma delicatula nymph and adults. Eggs hatched 55.9, 26.8, 21.6 days after incubation at 15, 20, $25^{\circ}C$ with 14L:10D condition and the hatching rates of egg were 61.9, 57.8, 30.4%, respectively. At high temperature conditions, egg development periods were shorter and the hatching rate was lower. The relationship between temperature and developmental rate was expressed by the linear equation Y=0.0028X-0.0228, $R^2$=0.9561. The low temperature threshold of eggs was $8.14^{\circ}C$ and the thermal constant required to reach larva was 355.4 DD. According to this relationship, the mean estimated hatching date was $22^{nd}$ May. The effective EFAM was natural plant extract, sophora extract, derris extract to nymph and natural plant extract, pyrethrum extract, sophora extract to adult. Among three colors of sticky trap : brown, blue and yellow, the brown sticky trap was the most attractive to nymphs and adults of L. delicatula over a 2 weeks trial period. It suggested that the brown sticky trap could be a very useful and environment-friendly control method for nymphs and adults of L. delicatula.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Journal of the Korean Chemical Society
• /
• v.64 no.5
• /
• pp.249-258
• /
• 2020

The potential use of egg shell and calcined egg shell as adsorbent was evaluated and compared to remove Cd²⁺ from aqueous solution. The samples were characterized using Thermogravimetry and Differential Thermal Analysis (TG/DTA), Scanning Electron Microscope (SEM), X-ray Diffractometer (XRD), Energy Dispersive X-ray Spectrometer (EDX) and BET Surface Analyzer. The batch-type adsorption experiment was conducted by varying diverse variables such as contact time, pH, initial Cd²⁺ concentrations and adsorbent dosage. The results showed that, under the initial Cd²⁺ concentrations ranged from 25 to 200 mg g^-1, the removal efficiencies of Cd²⁺ by egg shell powder (ESP) were decreased steadily from 96.72% to 22.89% with increase in the initial Cd²⁺ concentration at 2.5 g of dosage and 8 h of contact time. However, on the contrary to this, calcined egg shell powder (CESP) showed removal efficiencies above 99% regardless of initial Cd²⁺ concentration. The difference in the adsorption behavior of Cd²⁺ may be explained due to the different pH values of ESP and CESP in solution. Cd²⁺ seems to be efficiently removed from aqueous solution by using the CESP with a basicity nature of around pH 12. It was also observed that an optimum dosage of ESP and CESP for nearly complete removal of Cd²⁺ from aqueous solution is approximately 5.0 g and 1.0 g, respectively. Consequently, Cd²⁺ is more favorably adsorbed on CESP than ESP in the studied conditions. Adsorption data were applied by the pseudo-first-order and pseudo-second-order kinetics models and Freundlich and Langmuir isotherm models, respectively. With regard to adsorption kinetics tests, the pseudo-second-order kinetics was more suitable for ESP and CESP. The adsorption pattern of Cd²⁺ by ESP was better fitted to Langmuir isotherm model. However, by contrast with ESP, CESP was described by Freundlich isotherm model well.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.597-604
• /
• 2020

Exposure to heat stress (HS) has negative effects on pig production and health. Plasma concentrations of amino acids (AAs) can be used as indicators of HS. Therefore, this study was conducted to evaluate the effect of acute HS on feed intake, water drink, and plasma AAs in pigs. A total of 6 growing pigs (n = 6, 3 boars and 3 gilts) were raised in thermal neutral (TN; 25℃) conditions for the 5-d adaptation period as a control. After the adaptation, pigs were exposed to HS at 33℃ (HS33) for 24 h. All the pigs were fed the same diet formulated to meet or exceed predicted requirements during the whole experimental period. Blood samples were collected after the adaptation and heat treatment to verify the AAs. Measurements were the average daily feed intake (ADFI), average daily water intake (ADWI), water loss, tumor necrosis factor (TNF)-α, nitrate, total nitric oxide, and AAs in the plasma samples. Data were analyzed using the PROC GLM of SAS. HS33 had a lower ADFI (p < 0.05) and a tendency for an increased ADWI and water loss compared to TN. The level of TNF-α was significantly decreased (p < 0.05) in HS33. HS33 had a lower concentration of histidine and sarcosine compared to TN; however, there were no differences in the levels of nitrates and total nitric oxide. In conclusion, the results of this study show the differential effect of HS on the plasma concentration of AAs. We expect that the changed AAs could be potential indicators of HS.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.155-162
• /
• 2012

Sulfonated poly(ether ether ketone) (SPEEK) nanofibers were prepared by electrospinning. The nanofibrous membrane for polymer electrolyte membrane fuel cell (PEMFC) was fabricated by compression molding. The maximum degree of sulfonation was 95% and the initial thermal degradation temperature was $280^{\circ}C$ and it's value was lower than that of PEEK. The contact angle of SPEEK increased with decreasing the degree of sulfonation. The optimum voltage, flow rate, tip to collector distance (TCD) and concentration of electrospinning conditions were 22 kV, 0.3 mL/hr, 15 cm, and 23 wt%, respectively. The average nanofibrous diameter was 47.6 nm. The water uptake and ion exchange capacity of SPEEK nanofibrous membrane increased with increasing the sulfonation time and the amount of sulfonating agent. The electrical resistance and proton ionic conductivity of SPEEK membrane increased with decreasing and increasing the sulfonation time, respectively. Their values were 0.58~0.06 ${\Omega}{\cdot}cm^2$and 0.099 S/cm.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.54-70
• /
• 2017

The accumulator is a passive safety injection device for emergency core cooling systems. As an important safety feature for providing a high-speed injection flow to the core by compressed nitrogen gas pressure during a loss-of-coolant accident (LOCA), the accumulator injects its precharged nitrogen into the system after its coolant has been emptied. Attention has been drawn to the possible negative effects caused by such a nitrogen injection in passive safety nuclear power plants. Although some experimental work on the nitrogen injection has been done, there have been no comparative tests in which the effects on the system responses and the core safety have been clearly assessed. In this study, a new thermal hydraulic integral test facility-the advanced core-cooling mechanism experiment (ACME)-was designed and constructed to support the CAP1400 safety review. The ACME test facility was used to study the nitrogen injection effects on the system responses to the small break loss-of-coolant accident LOCA (SBLOCA) transient. Two comparison test groups-a 2-inch cold leg break and a double-ended direct-vessel-injection (DEDVI) line break-were conducted. Each group consists of a nitrogen injection test and a nitrogen isolation comparison test with the same break conditions. To assess the nitrogen injection effects, the experimental data that are representative of the system responses and the core safety were compared and analyzed. The results of the comparison show that the effects of nitrogen injection on system responses and core safety are significantly different between the 2-inch and DEDVI breaks. The mechanisms of the different effects on the transient were also investigated. The amount of nitrogen injected, along with its heat absorption, was likewise evaluated in order to assess its effect on the system depressurization process. The results of the comparison and analyses in this study are important for recognizing and understanding the potential negative effects on the passive core cooling performance caused by nitrogen injection during the SBLOCA transient.

• The Korean Journal of Zoology
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1966

Frequently , large masses of the young short necked clam, Tapes japonica , die at their tidal flats in summer and this phenomenon has not been explained clearly. The purpose of the present investigation is to study the thermal condition and the chlorinity level of tidal flats in which the young clam appears to be injured. A study is also mad efor the burrowing organism in the lower layer of the esturay over which the fresh water flow during the low tide. Observation are made at five places of the tidal flat near Ikawazu Fixheries Laboratory of Tokyo University during the ebb and flow tide period of the spring tide. The diurnal and monthly changes of tidal temperatures and chlorinities are measured. Results of the study are ; 1. The surface temperature of the tidal flat increases with the ebb tide, reaches the highest between 12-14PM, and gradually decreases thereafter. The temperatures of tidal flat below 5 and 10 cm increase gradually until the flow tide reaches the surface. 2. At the spring tide in summer , the diurnal change of surface of the tidal flat temperature is very extensive ; it reaches 37-39$^{\circ}C$ in August. At the depths of 5 and 10 cm the temperature remains at 33 $^{\circ}C$ and 31$^{\circ}C$ , respectively. 3. The chlorinity of the tidal flat is higher during May through June and lower July through August, and this seems to be related to the amount of rainfall. 4. The chlorinity of the surface of tidal flat increases slightly during the ebb and flow tide periods. The observed higher chlorinity of surface of the tidal flat was 18.82% Cl. 5. At near the esturay, the fresh water that overflows the tidal flat affects the chlorinity of the surface but no such influence to the depth of the flat. 6. From above observations, it is assumed that the young short necked clam in the tidal flat could be exposed to the severe change of environmental conditions. The high temperature of the tidal flat in summer and the low chlorinity of it at flood period may be considered as the change in environment.

• The Korean Journal of Zoology
• /
• v.9 no.1
• /
• pp.7-15
• /
• 1966

In a previous paper, the dirunal and monthly changes of the tidal flat temperature and chlorinity were observed. In this paper the resistance of the young short necked clam in various growth stages to the temperature, to the chlorinity and to the exposure were studies. The young clam used were in early (E), medium (M) and late (L) young stages whose shell lengths were 2.0-3.5mm, 9.0-11.0mm. and 14.0-16.0mm., respectively. The results were : 1. At various sea water temperatures , the chlorinity resistance of the young clam was directly proportional to the shell length. 2. When both inadequate sea water temperature and abnormal chlorinity are simultaneously applied, the resistance of these young clams was more markedly reduced than the case of applying either one of these conditions. 3. In clams of M and L, no lethal effect were observed when daily immersion of four to eight hours for a week into the sea water of any concentration of chloriity at 26-34$^{\circ}C$, whereas in E, 37-90% of mortalities were obtained by immersion of eight hours daily into both the fresh water and the sea water of higher chloriniites (more than 23.5$\textperthousand$ Cl) at the same temperature above. 4. The lower critical thermal maximum for lethal to the young clam was 38$^{\circ}C$. With four hours immersion daily at the water temperature of 38$^{\circ}C$, the mortalities of E, M and L to the lower chlorinities (less than 6.7$\textperthousand$Cl) were 100, 70-100 and 27-37% respectively ; to the higher chlorinities (more than 23.5$\textperthousand$Cl) 10-70, 10-37 and 3 % respectively ; to the normal range of chlorinities (13.4-16.8$\textperthousand$Cl) 0-13, 3 and 0 % respectively. 5. No lethal effects were observed in E and M clams immersed continuously for seven days in sea water with chlornities of 7.2 -21.7$\textperthousand$Cl at 18-24$^{\circ}C$, while notable mortalities were observed in E which had been kept at lower (less than 4.8$\textperthousand$ Cl) and higher (more than 24.1$\textperthousand$ Cl) chlorinites. 6. Although the resistance of the young clam to the chlorinity may have to be related closely to the life history of the clam prior subject to the experiment, the adapted chlorinity range was 7.2-19.3$\textperthousand$ Cl and the optimum range was 13.4-16.8$\textperthousand$Cl. 7. Remarkable lethal effects were observed for the E and M clams to the exposure temperature of 38$^{\circ}C$ whereas the L and had no such fatal results.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.820-826
• /
• 2017

Soybean is one of the most common food materials for making traditional Korean foods such as soybean paste, soy source and soy snack, and their manufacturing processes include heat treatment of soybean. This study was carried out to investigate the effect of heat treatment on the physicochemical properties of soybean. All samples were heat treated under commercial steamed, puffed or air-fried conditions, and then the protein molecular weight distribution, thermal properties, fluorescence intensity, protein solubility, and water and oil holding ability of the heat treated soybeans were examined. Sodium dodecyl sulfate polyacrylamide gel electrophoresis indicated that heat treatment caused fragmentation of polypeptide chain in soybean, showing the band of low molecular ranging from 17 to 40 kDa. The differential scanning calorimetric analysis showed the decrease of enthalpy values (${\Delta}H$) by heat treatment. Fluorescence spectroscopy indicated that the heat treatment caused lipid oxidation as proved by increasing emission intensity. The protein solubility at pH 3-6, and water holding capacity of heat treated soybeans were the higher than no treatment. These results suggest that the heat treatment resulted in decreased enthalpy values, and increased protein degradation, lipid oxidation and water affinity of soybean. Moreover, the effect of heat treatment on physiochemical properties of soybeans was more significant under air-fried condition.