• 제목/요약/키워드: thermal balance

검색결과 349건 처리시간 0.025초

인간 열환경 지수(HumanThermal Sensation)를 이용한 조경계획 및 디자인 방법 (Landscape Planning and Design Methods with Human Thermal Sensation)

  • 박수국
    • 한국조경학회지
    • /
    • 제40권1호
    • /
    • pp.1-11
    • /
    • 2012
  • 이 연구는 인간 에너지 균형 모델에서 출발한 인간 열환경 지수 분석 방법을 이용하여 캐나다 BC주에 있는 나나이모시 상업지구안 좁은 길과 경상남도 창원시 중심상업지구에 있는 소공원을 연구 대상지로 2009년 여름철 열환경을 분석한 것이다. 기후 입력 자료는 기온, 상대습도, 풍속, 태양 및 지구 복사에너지이었으며, 그 결과 인간 열환경 지수에 가장 크게 영향을 미치는 요소들은 태양 직사광선, 건물시계지수 그리고 풍속이었다. 음지는 약간 더운 정도의 열환경을 조성하는 것으로 나타나 매우 덥게 나타난 양지에 비해 훨씬 좋은 열환경을 조성하는 것으로 나타났다. 나나이모 연구 대상지에 있는 좁은 길들은 주변의 넓은 장소들에 비해 주변 건축물에서 나오는 태양 반사광선과 지구 복사에너지들이 더 많이 영향을 미쳐 훨씬 덥게 나타났다. 낮은 풍속에 의해서 인체에서 방출되는 현열과 잠열의 양이 현저히 줄어듦으로서 더 더운 열환경이 조성되는 것으로 나타났다. 기후요소를 조경에 접목하기 위해서, 인간 열환경 지수 분석 방법을 이용하는 것은 열환경적으로 쾌적한 옥외 공간조성에 영향을 미칠 것이며, 도시 열섬 완화와 기후변화 연구에도 잘 이용될 수 있을 것이다.

지표면 열평형의 열-수리적 경계조건에 대한 수치해석 (Numerical Study of Thermo-hydraulic Boundary Condition for Surface Energy Balance)

  • 신호성;정재형
    • 한국지반공학회논문집
    • /
    • 제37권12호
    • /
    • pp.25-31
    • /
    • 2021
  • 지반의 열-수리 현상에 대한 수치해석에서 경계조건은 해석결과의 정확도에 중요한 역할을 한다. 본 연구에서는 지반과 대기의 상호작용을 고려한 열-수리 경계조건을 제시하였다. 지면의 에너지 평형은 태양복사, 지구복사, 바람에 의한 대류, 수분 증발에 대한 잠열 그리고 지중으로의 열전도로 구성된다. 각각의 열흐름에 대한 방정식을 제시하고, 불포화 지반의 열-수리 현상에 대한 해석프로그램과 연계하여 수치해석을 수행하였다. 울산기상대에서 관측된 기상데이터를 이용한 수리-열적 해석에서 실측된 지표면 온도와 수치해석 결과가 매우 유사하였다. 낮시간의 수분 증발에 의한 잠재열은 비포장 지면의 온도를 낮추며, 야간시간에는 지면조건의 영향이 감소한 열적평형 상태에 도달하였다. 지면의 온도변화는 지중으로 깊어질수록 열확산으로 감소하였다. 지표면의 온도가 주요 관심사인 수치해석에서는 지반과 대기의 열-수리적 상호작용을 고려한 수치해석을 수행해야 한다.

저궤도위성 광학탑재체의 열진공시험 결과를 이용한 열해석 모델 보정 (The Correlation of Thermal Analysis Model using Results of LEO Satellite Optical Payload's Thermal Vacuum Test)

  • 김민재;허환일;김상호;장수영;이덕규;이승훈;최해진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.620-621
    • /
    • 2010
  • 우주공간에서 임무를 수행하는 인공위성이 궤도상에서 원활하게 작동할 수 있도록 열모델의 보정과정을 통하여 열해석 모델을 검증하는 과정이 이루어진다. 본 연구에서는 열해석 모델을 검증하는 과정으로 지상 열진공시험결과를 이용하여 요구조건을 충족시키기 위하여 열모델의 보정을 수행하였다.

  • PDF

기계평면시일의 열응력 크랙에 관한 실험적 연구 (Experimental Investigation of Thermal Stress Cracks in Mechanical Face Seals)

  • 김청균
    • Tribology and Lubricants
    • /
    • 제12권3호
    • /
    • pp.79-84
    • /
    • 1996
  • One of the greatest dangers in mechanical face seals is the formation of heat checking and thermal stress cracks on the sliding surfaces. These thermal distortions due to non-uniform heating lead to increase the leakage of the sealed fluids and wear, and with balance of the seal can cause the seal faces to part. In this study heat checking and thermal stress cracks are investigated experimentally. These thermal distortions are explained using the thermal models of the conatct geometries between the seal ring and the seal seat. To overcome these thermal problems, the thermohydrodynamic seal is presented. The newly developed mechanical seal may substantially reduce the friction torque, frictional heating which causes heat checking and thermal stress cracks, and wear.

Symmetric Balance Incomplete Block Design Code와 Arrayed-Waveguide Grating을 이용한 Optical CDMA Network Codecs (Optical CDMA Network Codecs with Symmetric Balance Incomplete Block Design Code and Arrayed-Waveguide Grating)

  • 지윤규
    • 대한전자공학회논문지SD
    • /
    • 제49권5호
    • /
    • pp.22-29
    • /
    • 2012
  • 본 논문은 symmetric balance incomplete block design(BIBD) code와 arrayed-waveguide grating(AWG) router의 주기적인 특성을 이용하여 optical CDMA network을 위한 coder-decoder(codec)을 구성하였다. 기존의 M-sequence code를 이용한 경우보다 다양한 구성을 할 수 있고 이 시스템의 잡음인 phase-induced intensity noise(PIIN)와 thermal noise를 분석하여 BER을 계산한 결과 향상된 성능을 보임을 알 수 있었다.

Data Analysis of KOMPSAT Thermal Test in Simulated On-orbit Environment

  • Kim, Jeong-Soo;Chang, Young-Keun
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제1권2호
    • /
    • pp.30-42
    • /
    • 2000
  • On-orbit thermal environment test of KOMPSAT was performed in early 1999. An analysis of the test data are addressed in this paper. For the thermal-environmental simulation of spacecraft bus, an artificial heating through the radiator zones and onto some critical heat-dissipating electronic boxes was made by Absorbed-heat Flux Method. Test data obtained in terms of temperature history were reduced into flight heater duty cycles and converted into the total electrical power required for spacecraft thermal control. Verification result of flight heaters dedicated to the bus thermal control is presented. Additionally, an exhaustive heating-control process for maintaining the spacecraft thermally safe and for realistic simulation of the orbital-thermal environment during the test are graphically shown. Qualitative suggestions to post-test model correlation are given in consequency of the analysis.

  • PDF

정량적 평가도구를 이용한 성인 요통검사 (Examination of Adult Low Back Pain Using the Quantitative Sensory Testing)

  • 이동진
    • 대한통합의학회지
    • /
    • 제3권2호
    • /
    • pp.39-46
    • /
    • 2015
  • Purpose: For this study, low back pain was analyzed by determining the influences of pain threshold, proprioceptive sense, and balance ability. Method: A total of 80 college students participated in this study with 30 adults regarded as normal and 50 adults regarded as having lower back pain. Measurements for participants regarding pain threshold, proprioception, and balance ability were conducted from April 10 to May 16, 2014. Result: Results from this study show significant differences between groups for back with regards to cold pain threshold, warm pain threshold measurements. There were also significant differences in proprioception for extension measurements. Finally, there were significant differences when comparing groups regarding balance for total balance score. Conclusion: With this data, practicing physical therapists can realize that a difference may exist between the patient's perception of treatment received and the actual treatment given by professionals due to differences in threshold, proprioception and balance ability. It is important for physical therapists to understand the reliance on objective data showing the effects of threshold, proprioception and balance ability on patients with back pain.

환경 제약을 고려한 화력계통에서의 경제적 운용 (Environmentally Constrained Economic Dispatch In Thermal Power System)

  • 김재철;백영식;송경빈;김창수
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제50권9호
    • /
    • pp.406-410
    • /
    • 2001
  • This paper develops an efficient evolutionary programming based algorithm for solving the environmentally constrained economic dispatch problem in thermal power system. The proposed algorithm can deal with the power balance constraints and the emission constraints which are equality and inequality constraints, respectively. Numerical results show that the proposed algorithm can provide superior solutions within reasonable time through its application to a test system.

  • PDF

열복사에 의한 단일 알루미늄 입자 점화-연소특성 측정 (Study on the Ignition and Burning Characteristic of Single Aluminum Particle with Thermal Radiation)

  • 임지환;윤웅섭;이도형
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.450-459
    • /
    • 2010
  • 고체추진제의 첨가제 또는 연료로써 주로 사용되는 알루미늄 단일 입자 연소시험 장비를 제작하고 연소 실험을 수행하였다. 산화 알루미늄으로 피복된 금속입자는 약 30~100 ${\mu}m$의 크기를 사용하였다. 단일 입자는 Electrodynamic Balance (EDB) 방법에 의해 공중 부양된 상태로, 중력에 의한 영향이 배제되어 금속입자 고정용 또는 측정용 장치들의 접촉에 의한 열손실을 제거시켜 실험 정확도를 높였다. Standard Hyperbolic Electrodynamic Levitator (SHEL) 내에서 부양된 입자에 $CO_2$ 레이저를 사용하여 점화시킨 후, 입자로부터 방사되는 열복사를 이용한 two wavelength pyrometry를 적용하여 알루미늄 입자 크기에 따른 연소시간, 평균 화염온도, 점화온도, 점화시간을 획득하였으며, 단일 알루미늄 입자의 점화-연소특성을 평가하였다.

  • PDF