• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2174-2183
• /
• 2021

Helium cooled solid breeder blanket as an important blanket candidate of the Tokamak fusion reactor uses ceramic pebble bed for tritium breeding. Considering the poor effective thermal conductivity of the ceramic breeder pebble bed, thin structure of tritium breeder pebble bed is usually adopted in the blanket design. The container wall has a great influence on the thin pebble bed packing structure, especially for the assembly of mono-sized particles, and thin pebble bed will appear anisotropic effective thermal conductivity phenomenon. In this paper, thin ceramic pebble beds composed of 1 mm diameter Li₄SiO₄ particles are generated by the EDEM 2.7. The effective thermal conductivity of different thickness pebble beds in the three-dimensional directions are analyzed by three-dimensional thermal network method. It is observed that thin Li₄SiO₄ pebble bed showing anisotropic effective thermal conductivity under the practical design size. Normally, the effective thermal conductivity along the bed vertical direction is higher than the horizontal direction due to the gravity effect. As the thickness increases from 10 mm to 40 mm, the effective thermal conductivity of the pebble bed gradually increases.

• Composites Research
• /
• 제15권3호
• /
• pp.18-29
• /
• 2002

본 논문에서는 얇은 벽보로 모델링 한 위성체 구조물에 입사되는 열 하중에 의해 발생하는 굽힘 진동과 열적 플러터에 대하여 연구하였다. 복합재료 얇은 벽보는 회전관성과 1차, 2차 와핑, 전단변형의 비고전적 요소를 포함한다. CUS구조물로 모델링한 복합재료 얇은 벽보의 열 진동 특성은 적층 순서와 섬유강화복합재료의 방향특성인자로부터 기인된 종방향 굽힘과 횡방향 굽힘의 언성과 관련하여 연구되었다. 수치 해석적인 방법으로 열적 플러터의 안정성 영역의경계값을 구하였으며, 태양 열 플럭스의 입사각, 감쇠계수, 섬유각의 변화에 의한 보의 변위를 구하였다. 주 구조물에 압전소자를 부착하여, 감지기와 작동기로 사용하여 제어해석을 수행하였다.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.215-222
• /
• 1995

C형 및 중공형 탄소섬유는 방직(spinning)시 홀의 전단응력을 원형의 그것에 비해서 더 광범위하게 걸쳐받게 됨으로 분자배향을 고도로 유도할 수가 있다. 핏치계 이방성 중공 및 C형 탄소섬유 강화재의 축 횡방향 열전도도를 에폭시 모재 하에서 실험하였다. 열이방성 정도에 있어 원형 탄소섬유 보강재인 경우 50 정도 였으나, C형과 중공형 보강재는 최고치로 대략 130과 118 정도를 보임으로써 원형 강화재 보다 200%이상 우수한 열이방성을 보였다.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.26-32
• /
• 2005

본 논문에서는 위성체 태양전지의 진동응답을 분석하였다. 태양전지는 복합재료 얇은 벽보와 태양전지 판 및 보조 바로 구성되어 있다. 복합재료 얇은 벽보는 전단 변형, 12차 와핑, 회전 관성과 재료의 방향성 등을 고려해야 한다. 태양전지 판은 z 방향으로 일정한 장력이 가해지는 얇은 막이며 보조 바는 강체 구조물이다. 열적 구배에 따른 구조 변형에 의한 영향을 고려하여 연성된 열적 구조 해석을 수행하였으며, 열적 불안정성 조건이 되는 안정성 기준 인자들을 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.399-406
• /
• 2001

Thermally induced vibration response of composite thin walled beams is investigated. The thin-walled beam model incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. Thermally induced vibration response characteristics of a composite thin walled beam exhibiting the circumferentially uniform system(CUS) configuration are exploited in connection with the structural bending-torsion coupling resulting from directional properties of fiber reinforced composite materials and from ply stacking sequence. A coupled thermal structure analysis that includes the effects of structural deformations on heating and temperature gradient is investigated.

• Journal of Magnetics
• /
• 제1권1호
• /
• pp.51-54
• /
• 1996

The effects of additional P-doping on the magnetic properties, thermal stability and cation distribution of Co-doped ${\gamma}-{Fe_2} {O_3}$have been investigated by means of magnetic annealing and measurements with vibration sample magnetometer and torque magnetometer. It is found that the P-doping promotes the coercivity and its magnetic-thermal stability, which may be attributed to increase of the cubic magneto-crystalline anisotropy constant, $K_1$ and the activation energy, E, for cation rearrangement, respectively. The cation distribution of P and Co-substituted iron oxide was calculated from the variation of the saturation magnetization with P-doping on the basis of the Neel model. It was found that the most of P ions in the iron oxides occupied the B-site of spinel lattice.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.192-197
• /
• 2004

The anisotropy in coefficient of thermal expansion (CTE) between the in-plane and out-of-plane of 3-dimensional thick composite structures induces residual stresses and the large void content due to insufficient compaction of fabric composites, which results in low interlaminar strengths. In order to reduce the through thickness CTE and the void content, in this work, carbon fabric phenolic laminates were compacted by pressure generated by autoclave and a compressive jig, from which the through-thickness CTEs and the void contents were measured. From the measurement, it was found that the through-thickness CTE and the void content had different characteristics from ordinary composites due to gas produced during the cure reaction of phenolic resin.

• 소성∙가공
• /
• 제27권6호
• /
• pp.363-369
• /
• 2018

This study measured the mechanical properties of an ash wood under various temperature and humidity conditions and a finite element model was developed to predict the behavior of the wood. A humidity-controlled chamber was developed and used for measuring the dimensional changes of woods under various humidity conditions. The thermal expansion coefficient and the elastic stiffness constants were measured by using a thermal chamber and the three-point bending test along the three principal axes of the wood. A constitutive model was proposed to describe the moisture content and temperature dependent behavior of wood. The proposed model was validated for the warping test of a wood plate. The warping of the plate was calculated using the finite element method. The calculated amount of warping was in consistence with the measurements.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.439-447
• /
• 2020

This paper presents two sets of full three-dimensional thermoelastic finite element analyses of superimposed thermo-mechanically loaded Spar Wingskin Joints made with laminated Graphite Fiber Reinforced Plastic composites. The study emphasizes the influence of residual thermal stresses and material anisotropy on the inter-laminar delamination behavior of the joint structure. The delamination has been pre-embedded at the most likely location, i.e., in resin layer between the top and next ply of the fiber reinforced plastic laminated wingskin and near the spar overlap end. Multi-Point Constraint finite elements have been made use of at the vicinity of the delamination fronts. This helps in simulating the growth of the embedded delamination at both ends. The inter-laminar thermoelastic peel and shear stresses responsible for causing delamination damage due to a combined thermal and a static loading have been evaluated. Strain energy release rate components corresponding to the Mode I (opening), Mode II (sliding) and Mode III (tearing) of delamination are determined using the principle of Virtual Crack Closure Technique. These are seen to be different and non-self-similar at the two fronts of the embedded delamination. Residual stresses developed due to the thermoelastic anisotropy of the laminae are found to strongly influence the delamination onset and propagation characteristics, which have been reflected by the asymmetries in the nature of energy release rate plots and their significant variation along the delamination front.

• 터널과지하공간
• /
• 제33권6호
• /
• pp.495-507
• /
• 2023

불연속면 거칠기는 암반의 기계적 특성에 큰 영향을 주며 열·수리 역학적 거동에도 많은 영향을 미치는 요소이다. 본 연구에서는 입체사진측량기법을 이용하여 불연속면에 대한 3차원 점군 데이터를 생성시키고 이를 이용하여 불연속면의 거칠기 특성화를 수행하였다. 3차원 점군 데이터로 재생성된 불연속면 프로파일과 프로파일 게이지를 이용하여 수동으로 측정한 프로파일을 비교하여 취득한 점군 데이터가 암반면의 실제 형상을 정확하게 재현하였는지 평가하였다. 또한, 측정 프로파일수가 거칠기 평가에 미치는 영향에 대해 분석하였고, 거칠기의 이방성 평가방법을 제안하고 실제 암반 불연속면에 대한 거칠기 이방성 평가를 수행하였다.