• Journal of Adhesion and Interface
• /
• 제15권2호
• /
• pp.69-76
• /
• 2014

Two kinds of epoxy-functionalized alkoxysilane (EAS) compounds (EAS-MS and EAS-ES) were successfully synthesized through the reaction between epoxy resin (YD-128) and aminopropyl trimethoxysilane (APTMS) or aminopropyl triethoxysilane (APTES). By the hydrolysis-polycondensation reaction of EAS compounds with 3-Glycidyloxypropyl trimethoxysilane (GPTMS) and Tetraethyl orthosilicate (TEOS), silica/epoxy nanohybrids could be prepared at various compositions of EAS to GPTMS/TEOS. Prepared nanohybrids were yellow transparent and miscible with various organic solvents. By the reaction silica/epoxy nanohybrids with curing agents (TETA or acrylic acid), cured hybrids films could be obtained. These cured films showed higher thermal stability and mechanical property compared to cured neat epoxy resin. TEM and AFM images showed formation of nano-sized silica nanoparticles within cured hybrid films.

• New & Renewable Energy
• /
• 제10권1호
• /
• pp.20-29
• /
• 2014

The present study investigated the effects of thermal pre-treatment on the enhancement of anaerobic biodegradability of waste activated sludge at varied TS concentration levels. The activated sludges were thermally oxidized for 30 minutes at $80{\sim}200^{\circ}C$ with varied TS concentrations (2%, 4% and 6%). and then, sludge characteristics, solubilization efficiency and methane production yield of thermally pre-treated sludges were analyzed. The higher the temperature in the thermal pre-treatment, the higher the concentration levels of dissolved matters such as $SCOD_{Cr}$, $NH_4{^+}$ and VFAs, which indicates that the thermal pre-treatment facilitates the hydrolysis and acid fermentation. Furthermore, the solubilization efficiency was increased in proportion to the temperature rise at all TS concentrations and was reached at 68.9%, 55.6% and 53.1%, respectively, at $200^{\circ}C$. In the BMP test of the pre-treated sludges, higher methane production yields were observed as 0.313. 0.314 and $0.299m^3\;CH_4/kg\;VS_{add}$ at the condition of TS 2% ($160^{\circ}C$), 4% ($160^{\circ}C$) and 6% ($180^{\circ}C$), respectively, and degradation rate was increased by 84%, 79% and 65% compared with non-pretreated waste activated sludge. These findings suggest the effectiveness of thermal pre-treatment of waste activated sludge for anaerobic biodegradable process.

• YAKHAK HOEJI
• /
• 제23권3_4호
• /
• pp.147-152
• /
• 1979

Experiments were carried out to investigate for the interaction between FAD solution and synthetic resin containers made of polyvinylchloride(PVC), polyethylene(PE), and polycarbonate(PC), and for the effect of glycyrrhizine or malic acid on stabilization of FAD in aqueous solution by accelerated stability analysis. Analysis of FAD was determined by means of spectrometer and by separating by paper chromatography and metal ions were detected by atomic absorption spectrophotometer, which were extracted from containers by means of Food and Additive Regulation Standard. The thermal decomposition of FAD in aqueous solution was pseudo first order reaction and it was inhibited by adding glycyrrhizine or malic into the solution. PVC, PE and PC containers accelerated the decomposition of FAD in solution. It is assumed that bivalent heavy metals in resin containers may catalize the hydrolysis of FAD. The metals detected from the containers were Ca, Zn, Cu, Fe, Pb and Cd. And the total amounts of detected metals from PVC were 6.2mcg/cm$^{2}$, PE, 5.5mcg/cm$^{2}$, and PC, 2.7mcg/cm$^{2}$ which were proportional to the rate constant of FAD decomposition in aqueous solution.

• Textile Coloration and Finishing
• /
• 제34권3호
• /
• pp.197-206
• /
• 2022

The purpose of this study was to confirm the optimal spinning conditions for PLA (Polylactic acid) as a fiber forming polymer. According to the melt spinning test results of PLA, the optimal spinning temperature was 258℃. However, it needs to note that relatively high pack pressure was required for spinning at 258℃. At an elevated temperature, 262℃, mono filament was broken easily due to hydrolysis of PLA at a higher temperature. In case of fiber strength, it was confirmed that the draw ratios of 2.7 to 3.3 were optimal for maximum strength of melt spun PLA. Above the draw ratio, 3.3, the strength of the PLA fibers was lowered. It was presumed that cleavage of the PLA polymer chain over maximum elongation. The heat setting temperature of GR (Godet roller) showed that the maximum strength of the PLA fibers was revealed around 100℃. The degree of crystallinity and the strength of the PLA fibers were decreased above 100℃. The optimal take-up speed (Spinning speed) was around 4,000m/min. Thermal analysis of PLA showed 170℃ and 57℃ as Tm (melting temperature) and Tg (glass transition temperature), respectively.

• Textile Coloration and Finishing
• /
• 제27권3호
• /
• pp.175-183
• /
• 2015

Weight loss treatment of a fiber leads an improvement of its handle and drape properties. Hydrolysis of a fiber is commonly known as a method to reduce its weight of 5-40%. Most of the studies on the weight loss treatment are mainly based on polyester fibers and there has been almost no study on the weight reduction of nylon fibers. In this study, however, in order to develop a use of nylon 6 fiber for the industrial applications such as toothbrush, underwear, carpet and more, weight loss treatment of a nylon 6 fiber was carried out. Under various treatment conditions, morphological analysis were done to observe the change in the structure of the surface and analysis. From the observation of formic acid treated nylon 6 fiber, there were many etched and deformed morphologies. Thermal and crystalline properties were analyzed to find the changes in the crystal structure caused by the weight loss treatment. There were little differences in the crystalline properties of nylon 6 fiber by formic acid treatment. Tensile strength of nylon 6 fiber decreases with acid concentration. The FITR peak intensity of the amide bond decreases with formic acid concentration.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1114-1123
• /
• 2015

Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제15권2호
• /
• pp.89-97
• /
• 2007

In this study, thermalpretreatment was used to solubilize organic matter contained in sewage sludge before acid fermentation. By thermal pretreatment, solubilization of particulate CODcr, carbohydrate and protein increased. By thermal treatment at $120^{\circ}C$ for 30 minutes, CODcr solubilization efficiency of the primary sludge reached 8.3%. Meanwhile, for the secondary sludge, CODcr solubilization efficiency reached 16.5% because of high solubilization ratio of protein under the same pretreatment conditon. The results of anaerobic biodegradability test showed that both VFAs conversion ratio and hydrolysis rate of organic compounds in sewage sludge were improved by thermal pretreatment. Meanwhile, the optimum thermal pretreatment condition was varied with composition of organic compounds in sludge. In this study, the optimun thermal pretreatment condition of the primary sludge, containing high concentration of carbohydrate, was $80^{\circ}C$ for 30 minutes. Meanwhile, for the secondary sludge, mainly composed of protein, the sludge treated at $120^{\circ}C$ for 30 minutes showed the effective organic removal and VFAs production.

• Journal of Korean Society of Environmental Engineers
• /
• 제27권7호
• /
• pp.746-752
• /
• 2005

In this study, the effect of reaction parameters including reaction temperature, time, and pressure on sludge degradation and conversion to intermediates such as organic acids were investigated at low critical wet air oxidation(LC-WAO) conditions. Degradation pathways and a modified kinetic model in LC-WAO were proposed and the kinetics model predictions were compared with experimental data under various conditions. Results in the batch experiments showed that reaction temperature directly affected the thermal hydrolysis reaction rather than oxidation reaction. The efficiencies of sludge degradation and organic acid formation increased with the increase of the reaction temperature and time. The removal of SS at $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 10 min of reaction time were 52.6%, 68.3%, 72.6%, and 74.4%, respectively, indicating that most organic suspended solids were liquified at early stage of reaction. At $180^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$ and $240^{\circ}C$ of reaction temperatures and 40 min of reaction time, the amounts of organic acids formed from 1 g of sludge were 93.5 mg/g SS, 116.4 mg/g SS, 113.6 mg/g SS, and 123.8 mg/g SS, respectively, and the amounts of acetic acid from 1 g of sludge were 24.5 mg/g SS, 65.5 mg/g SS, 88.1 mg/g SS, and 121.5 mg/g SS, respectively. This suggested that the formation of sludge to organic acids as well as the conversion of organic acids to acetic acid increased with reaction temperature. Based on the experimental results, a modified kinetic model was suggested for the liquefaction reaction of sludge and the formation of organic acids. The kinetic model predicted an increase in kinetic parameters $k_1$ (liquefaction of organic compounds), $k_2$ (formation of organic acids to intermediate), $k_3$ (final degradation of intermediate), and $k_4$ (final degradation of organic acids) with reaction temperature. This indicated that the liquefaction of organic solid materials and the formation of organic acids increase according to reaction temperature. The calculated activation energy for reaction kinetic constants were 20.7 kJ/mol, 12.3 kJ/mol, 28.4 kJ/mol, and 54.4 kJ/mol, respectively, leading to a conclusion that not thermal hydrolysis but oxidation reaction is the rate-limiting step.

• Microbiology and Biotechnology Letters
• /
• 제49권1호
• /
• pp.88-94
• /
• 2021

The seaweed, Gracilaria verrucosa (red seaweed) was fermented to produce bioethanol. Optimal thermal acid hydrolysis conditions were determined as 200 mM H₂SO₄ and 10% (w/v) seaweed slurry at 130℃ for 60 min yielding 47.5% of pretreatment efficiency (E_p). After the thermal acid hydrolysis, enzymatic saccharification was carried out with 16 U/ml Viscozyme L, Cellic CTec2 or mixture of Viscozyme L and Cellic CTec2 to G. verrucosa hydrolysates. Enzymatic saccharifications with Viscozyme, Cellic CTec2 or mixture of those yielded 7.3 g/l glucose with efficiency of saccharification, E_s = 34.9%, 11.6 g/l glucose with E_s = 64.4% and the mixture of those 9.6 g/l glucose with E_s = 56.6%, respectively. Therefore, based on the E_s value, Cellic CTec2 was selected for the optimal enzyme for enzymatic saccharification of G. verrucosa hydrolysate. The ethanol productions with non-adapted S. cerevisiae CEN-PK2 (wild type) and S. cerevisiae CEN-PK2 with adaptive evolution to galactose produced 8.5 g/l ethanol with Y_EtOH = 0.19 and 21.5 g/l ethanol with Y_EtOH = 0.50 at 144 h, respectively. From these results, the ethanol production by S. cerevisiae with adaptive evolution showed high concentration of ethanol production using G. verrucosa as a substrate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제12권4호
• /
• pp.235-240
• /
• 1979

A study on the amino acid composition of raw frozen krill, and krill solubles manufactured in forms of paste and powder has been carried out. The raw frozen krill was thawed, chopped, mixed and homogenized with same amount of water. The mixture was autolyzed or hydrolyzed by tile addition of $0.2\%$ pronase-p, a commercial proteolytic enzyme, to the weight of the raw frozen krill at $45^{\circ}C$ for 4 hours. After a thermal inactivation of enzymes at $95^{\circ}C$ for 15 minutes, the autolysate and the hydrolysate were centrifuged and filtered through gauzes, respectively, and then tile lipid layer in the supernatant was removed, The autolysate and the hydrolysate were finally concentrated under reduced atmospheric pressure in a rotary vacuum evaporator at $45^{\circ}C$ for 1 hour to produce the krill solubles in form of paste. The powdered krill solubles were prepared by the addition of $5\%$ starch to the autolysate and hydrolysate and by means of concentration in the rotary vacuum evaporator at $45^{\circ}C$ for 30 minutes and a forced air drying at $58^{\circ}C$ for 3 hours with a air velocity of 3m/sec. Among the amino acids in raw frozen krill, glutamic acid, lysine, and aspartic acid showed high values in quantity and then followed leucine, alanine, arginine, glycine and proline. The qnantity of histidine was very small and that of cystine was only in trace. The krill solubles in forms of paste and powder prepared by autolysis and hydrolysis with pronase-p revealed almost the same patterns in amino acid composition as in raw frozen krill. In case of free amino acids, a large quantity of it in raw frozen krill consisted of lysine, arginine, proline, alanine and leucine. The quantities of cystine, histidine and glutamic acid were, in contrast, very small. In the soluble krill paste prepared by autolysis, lysine, leucine, threonine and alanine existed in large quantities among the free amino acids and cystine, aspartic acid and histidine existed in small quantities. The contents of almost all of the free amino acids ill soluble krill paste perpared by hydrolysis with pronase-p were increased slightly as compared with those in soluble krill paste prepared by autolysis. In this product, the contents of cystine, histidine and serine were very low and lysine, leucine, arginine and proline were the dominant group in quantities among the free amino acids. The krill solubles in forms of paste and powder were not inferior to whole egg in the view point of its essential amino acid composition.