• Korean Journal of Materials Research
• /
• v.28 no.5
• /
• pp.268-272
• /
• 2018

An $Al_2O_3/AlN$ bilayer deposited on GaN by atomic layer deposition (ALD) is employed to prepare $Al_2O_3/AlN/GaN$ metal-insulator-semiconductor (MIS) diodes, and their interfacial properties are investigated using X-ray photoelectron spectroscopy (XPS) with sputter etch treatment and current-voltage (I-V) measurements. XPS analyses reveal that the native oxides on the GaN surface are reduced significantly during the early ALD stage, indicating that AlN deposition effectively clelans up the GaN surface. In addition, the suppression of Al-OH bonds is observed through the ALD process. This result may be related to the improved device performance because Al-OH bonds act as interface defects. Finally, temperature dependent I-V analyses show that the barrier height increases and the ideality factor decreases with an increase in temperature, which is associated with the barrier inhomogeneity. A Modified Richardson plot produces the Richardson constant of $A^{**}$ as $30.45Acm^{-2}K^{-2}$, which is similar to the theoretical value of $26.4Acm^{-2}K^{-2}$ for n-GaN. This indicates that the barrier inhomogeneity appropriately explains the forward current transport across the $Au/Al_2O_3/AlN/GaN$ interface.

• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.559-577
• /
• 2016

There are many theoretical analyses and experimental studies of the hydrodynamics for the tension leg platform (TLP) of a floating wind turbine. However, there has been little research on the arrangement of the TLP's internal structure. In this study, a TLP model and a 5-MW wind turbine model as proposed by the Minstitute of Technology and the National Renewable Energy Laboratory have been adopted, respectively, to comprehensively analyze wind effects and wave and current combinations. The external additional coupling loads on the TLP and the effects of the loads on variables of the internal structure have been calculated. The study investigates preliminary layout parameters-namely, the thickness of the tension leg body, the contact mode of the top tower on the tension leg, the internal stiffening arrangement, and the formation of the spoke structure-and conducts sensitivity analyses of the TLP internal structure. Stress is found to be at a maximum at the top of the tension leg structure and the maximum stress has low sensitivity to the load application point. Different methods of reducing maximum stress have been researched and analyzed, and the effectiveness of these methods is analyzed. Filling of the spoke structure with concrete is discussed. Since the TLP structure for offshore wind power is still under early exploration, arrangements and the configuration of the internal structure, exploration and improvements are ongoing. With regard to its research and analysis process, this paper aims to guide future applications of tension leg structures for floating wind turbine.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.233-238
• /
• 2017

Although numerous theoretical and empirical studies on the capital structure have been performed, the studies on the capital structure of the high potential enterprises have not been worked. This paper performed empirical analyses for the first time to find out the determinants of capital structure of the high potential enterprises of Korea using the financial data of the manufacturing high potential enterprises listed on the Korea Exchange and KOSDAQ during 2010~2016. The results of regression analyses with debt ratio as dependent variable and profitability, firm size, asset tangibility and non-debt tax shield as independent variables show that the coefficients were relatively significant. The variables of the profitability and the tangibility were found to have positive relationship with the debt ratio. The non-debt tax shield were found to have in general positive relation with the leverage.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.181-190
• /
• 2005

In accordance with the rapid growth of digital media in 1990s, the state of indetermination that is found in digital process has been emphasized in the field of natural science and philosophy. Digitalized space design has been dramatically developed and it raised heated debate and comment on 'folded space' The purpose of this thesis is to explore how the cognitive-ecological factors constitute fold structures in space design of the late 20th century. Syntax of space structure and geometric composition were analyzed to define what types of cognitive-ecological factors are contrived in the process of visual information. In particular, I put higher theoretical emphasis on what characteristics are ensued in the process of structuring spaces than any other subjects. Through theses analyses and discussions, I raised questions on what principles are operating to create new space design that counts on non-linear structure and its formational process. And I also observed what influences these structural principles of design could fundamentally bring to human beings. First, I proposed that we could overcome reductionist space design through cognitive-ecological approach. Some key concepts such as affordance, parallel processing, and redundancy were adopted as defining elements of non-linear structures. As a result of analyses, I found that the cognitive-ecological approach could substitute the reductionist space design of the past. What is also found is that the three variables are the ultimate ecological elements. In addition, as a methodological concept of fold structures, the form of 'topology' was highlighted because it could be a supporting idea to the cognitive-ecological factors. Second, I claimed that non-linear design is more experiential than rational linear design, and it is more efficiently correspondent to human being than any other forms. What is intended and implied in non-linear structure is also indicated.

• YAKHAK HOEJI
• /
• v.51 no.1
• /
• pp.13-34
• /
• 2007

Traditional Medicine (TM) is called as philosophical medicine in Korea. An unified theory named as Sihnsang-hanron (SSHR) was hypothesized through studies of scientific analyses on various theories of TM. SSHR has extracted seven concepts which are six common ones from the great three books (三大原典) and the Logic of Laotzu & Chuangtzu (老莊思想). Six common concepts are the affecting by cold (傷寒), qi (氣), cold or heat (寒熱), exterior & interior of body (表裏), deficiency or excessiveness (虛實), and yin & yang (陰陽). We have tried to apply these seven concepts to Physics and Life Science. The affecting by cold means anti-sunlight and the origin of all diseases. The difference between TM and modern medical science would be in diagnostic methods as well as their theoretical analyses for various diseases. The modern science follows Haeckel's positive dialectics applied by the biological monism, and oriental one(SSHR) does Yin-Yang monism from the studies of Logic of Laotzu (老子) & Chuangtzu (莊子). SSHR would make the theory of exterior & interior of body (表裏論) and six channels (六經) develope scientifically as a diagnostic technique of disease. This theory is an excellent one that can't be found out in modern medical science, and so it should be developed as a scientific theory by using modern mechanic instrument. Chuangtzu asserted that ai was the basic substance of the universe. It is hypothesized that qi (氣) is like small particles -higgs, with dynamic power in modern Physics. We consider cautiously qi could be calculated by mathematics through higgs' bosons in near future.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.178-191
• /
• 1993

The electromagnetic filter has been recognized as a technological replacement for the conventional filtration systems of the nuclear power plant coolant. But, as of now there are neither clear understandings of the phenomena occurring in the electromagnetic filter nor the general theoretical analyses. These facts make the application or the electromagnetic filter to the real systems a little risky, and therefore it has not been commercialized although it shows excellent performances in such situations as the plant abnormality, where the conventional filters usually fail. This experimental study of the low power electromagnetic filter aims at the clarification of the general characteristics under varying operational parameters. Since the detailed characteristics may differ from one electromagnetic filter to another, they are considered secondary. The impurities applied are the highly magnetic magnetite (Fe$_3$O$_4$) and the diamagnetic cuprous oxide (Cu$_2$O). The empirical equations are derived from the experimental data by the regressional analyses. They are classified of three types : Efficiencies vs. Time, Efficiencies vs. Load, and Load vs. Time. The characteristics of the electromagnetic filter observed in this experiment agreed well with other related works in many aspects. Especially in this study, some assumptions and discussions including the physical deposition are combined for the explanations of the filter characteristics found in our and other experimental works.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1355-1362
• /
• 2004

In this paper, we present the performance analysis of a multi-path searcher operating over Rayleigh fading channels when multiple transmit antennas are employed in the down-link of W-CDMA system. The simulation results for the receiver operating characteristics (ROC) for 1, 2, and 4 transmit antennas are presented to corroborate the theoretical analyses. We also propose a procedure to find the optimum parameters of double-dwell serial searcher according to the number of the multiple transmit antennas. Our analyses and simulations indicate that post-detection integration is not necessary when the number of transmit antennas is more than two. Finally, we found that increasing transmit diversity order does not necessarily improve the detection performance when the received pilot signal strength is relatively low. Therefore, this gives us a practical criterion on increasing transmit diversity order.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.47-59
• /
• 2008

Application of mechanically stabilized earth wall (MSEW) abutment has been rapidly increasing in United States of America, Pennsylvania since 2002. MSEW is effective for reducing construction cost and period compared to general concrete reinforced wall. In the paper, theoretical background and conventional criterion of MSEW abutment that is widely used abroad are analyzed. Based on the results, application of suitable MSEW abutment to domestic bridge type is examined. For the application of MSEW abutment in Korea, load interacting with upper shoe in domestic bridge types and structural analyses of beam seat and pile are investigated. As a result, all applications are possible except for PSC BOX Bridge that has heavy self-weight of girder. Through two and three dimensional numerical analyses, horizontal behaviour mechanisms between pile and MSEW were analyzed and field tests are also carried out for seven piles behind earth walls. From results of field tests, it is confirmed that an angle of internal friction of backfill material needs to be greater than 34 degree to use H-Pile as foundation of MSEW.

• Journal of Sensor Science and Technology
• /
• v.14 no.5
• /
• pp.322-330
• /
• 2005

A new type of transducer, piezoelectric floating mass transducer (PFMT) which has advantages of piezoelectric and electromagnetic transducer has been proposed and implemented for the implantable middle ear hearing devices. By the uneven bonding of piezoelectric material to the inner bottom of transducer case, the PFMT can vibrate back-and-forth along the longitudinal axis of the transducer even though the piezoelectric material within the cylindrical case produces only the bilateral expansion and contraction according to the applied electrical signal. To improve efficiency of the PFMT, the multi-layered piezoelectric material has been adapted. The small number of components in the PFMT enables the simple manufacturing and the easy implanting into the middle ear. In order to examine the characteristics of vibration, mechanical modeling and finite element analyses of the proposed transducer have been performed. From the result of theoretical analyses and the measured data from the experiment, it is verified that the implemented PFMT can be used in implantable middle ear hearing devices.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.82-93
• /
• 2019

In this paper, the ductile fracture criteria for a marine structural steel (EH36) are presented and validated. The theoretical background of the recently developed Hosford-Coulomb (HC) fracture strain model and the DSSE fracture strain model which was developed to apply to the shell elements is described. In order to accurately estimate the flow stress in the large strain range up to the fracture, the material constants for the combined Swift-Voce constitutive equation were derived by the numerical analyses of the smooth and notched specimens made from the EH36 steel. As a result of applying the Swift-Voce flow stress to the other notched specimen model, a very accurate load - displacement curve could be derived. The material constants of the HC fracture strain and DSSE fracture strain models were independently calibrated based on the numerical analyses for the smooth and notch specimen tests. The user subroutine (VUMAT of Abaqus) was developed to verify the accuracy of the combined HC-DSSE fracture strain model. An asymmetric notch specimen was used as verification model. It was confirmed that the fracture of the asymmetric specimen can be accurately predicted when a very small solid elements are used together with the HC fracture strain model. On the other hand, the combined HC-DSSE fracture strain model can predict accurately the fracture of shell element model while the shell element size effect becomes less sensitive.