• 한국식생활문화학회지
• /
• 제33권3호
• /
• pp.268-275
• /
• 2018

This study examined the effects of Boehmerianivea powder on the functional and sensory characteristics of dumpling shell. Various dumpling shell samples were prepared with wheat flour containing different amounts of Boehmerianivea powder. The instrumental characteristics were examined and sensory evaluations were performed. According to the amylograph data, the composite Boehmerianivea powder-wheat flour samples had increased gelatinization temperatures with increasing Boehmerianivea powder content; whereas the initial viscosity at $95^{\circ}C$, viscosity at $95^{\circ}C$ after 15 minutes, and the maximum viscosity were reduced. The L, a and b Hunter's color values decreased with increasing Boehmerianivea powder content. In addition to the cooked weight, the cooked volume and turbidity of dumpling shell increased with increasing level of Boehmerianivea powder. In terms of the textural characteristics, the addition of Boehmerianivea powder increased the chewiness, smoothness and adhesiveness. The DPPH free radical scavenging activity increased significantly with increasing content of Boehmerianivea powder (p<0.05). Finally, the results of the sensory properties indicated that 5% Boehmerianivea powder had the highest scores. These results suggest that Boehmerianivea powder can be applied to dumpling shells to achieve high quality and functionality.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.654-664
• /
• 2018

Self-pressurization analysis of the natural circulation integral nuclear reactor through a new dynamic model is studied. Unlike conventional pressurized water reactors, this reactor type controls the system pressure using saturated coolant water in the steam dome at the top of the pressure vessel. Self-pressurization model is developed based on conservation of mass, volume, and energy by predicting the condensation that occurs in the steam dome and the flashing inside the chimney using the partial differential equation. A simple but functional model is adopted for the steam generator. The obtained results indicate that the variable measurement is consistent with design data and that this new model is able to predict the dynamics of the reactor in different situations. It is revealed that flashing and condensation power are in direct relation with the stability of the system pressure, without which pressure convergence cannot be established.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.167-173
• /
• 2021

As population inflows into the city and the traffic volume increases, a three-dimensional transportation system was developed, and as a result, the lower space of the viaduct was formed. Since the space under viaduct includes factors such as shadow, noise, vibration, and disconnection between regions, efforts have been made to prevent slumming and help form local communities by activating them. This study intends to derive analysis based on locality, functionality, and communication for a variety of access to the lower space of an overpass, and analyze cases based on the result. We have the results through analysis are as follows. First, the space under the viaduct has been turned into a slum due poor accessibility and utilization, and local residents and local government also neglected the space. However, it appears to be a space with high potential utilization. Second, by giving diversity to the lower space of the viaduct and cultivating spatial identity, the space was activated and connected with the surroundings by providing a more pleasant environment. Third, accessibility was improved by providing a complex functional and aesthetic environment, and by providing various programs that could form a community among residents, voluntary and active participation was elicited.

• Journal of Microbiology
• /
• 제40권4호
• /
• pp.319-326
• /
• 2002

Cellular DNA in prokaryotes is organized in nucleic acid-protein self-assemblies referred to as the nucleoid. The physical forces responsible for its stability inside the poor solvent properties of the cytoplasm and their functional implications are not understood. Studies on the organisation and functioning of the cytosol of cells largely rely on experimental protocols performed in highly dilute solutions using biochemically purified molecules, which is not a reliable substitute for the situation existing in vivo. Our current research interest is focused on the characterization of biological and physical forces determining the compaction and phase separation of DNA in Escherichia coli cytoplasm. We have emphasized the effect of excluded volume in solutions with high macromolecular concentrations (macromolecular crowding) upon self-association patterns of reactions. The prokaryotic cytosol was simulated by addition of inert polymer polyethylene glycol (PEG) (average molecular weight 20000), as an agent which afterwards facilitates the self-association of macromolecules. Fluorescence microscopy was used for direct visualization of nucleoids in intact cells, after staining with DAPI (4',6-diamidino-2-phenylindole dihydrochloride). Addition of the crowding agent PEG 20,000, in increasing concentrations generated progressively enhanced nucleoid compaction, the effect being stronger in the presence of 0.2 M NaCl and 5 mM MgCl$\_$2/. Under these conditions, the nucleoids were compacted to volumes of around 2 ㎛$\^$3/ or comparable sizes with that of living cells.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.451-456
• /
• 2020

본 논문에서는 JTDLS 완성형 항공기에 장착하기 위한 내장형 안테나 설계 방법에 대해 연구하였다. 제안된 안테나는 MIDS-LVT 운용 대역을 충족하고, 확장성을 고려하여 광대역으로 설계하였다. 설계결과, 제안된 안테나는 기존 블레이드 안테나와 전기적 성능은 유사하고, 광대역 특성임을 확인하였다. 항공기 장착성을 확인하기 위해 항공기 상/하부에 안테나를 장착하여 EM 분석한 결과, 상/하부 모두 양호한 복사특성을 나타내는 것을 확인하였다. 본 연구를 통해 획득한 기술은 JTDLS 완성형 항공기에 활용 가능할 것으로 판단된다.

• 항공우주시스템공학회지
• /
• 제6권3호
• /
• pp.7-12
• /
• 2012

The contents of aircraft system safety assessment vary depending on factors such as the complexity of the system, how critical the system is to flight safety, what volume of experience is available on the type of system and the novelty and complexity of the technologies being used. If the system safety assessment is to substantiate that the developed products are 'safe enough' to be taken into use, then the system safety assessment should be planned and managed to provide the necessary assurance that all relevant hazards and failure conditions have been identified and that all significant combinations of hazards and failures which could cause those conditions have been considered. The assessment must assist the designer and management in making decisions. It must make clear what the critical features of each system are and upon which special manufacturing techniques, inspection, testing, crew drills and maintenance practice they are critically dependent. This paper has prepared to study on promoting the efficiency of aircraft system safety assessment and to present how to compile system safety assessment strategy.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.117-128
• /
• 2018

In this research work, free vibrations of simply supported functionally graded plate resting on a Winkler-Pasternak elastic foundation are investigated by a new shear deformation theory. The influence of alternative micromechanical models on the macroscopic behavior of a functionally graded plate based on shear-deformation plate theories is examined. Several micromechanical models are tested to obtain the effective material properties of a two-phase particle composite as a function of the volume fraction of particles which continuously varies through the thickness of a functionally graded plate. Present theory exactly satisfies stress boundary conditions on the top and the bottom of the plate. The energy functional of the system is obtained using Hamilton's principle. The closed form solutions are obtained by using Navier technique, and then fundamental frequencies are found by solving the results of eigenvalue problems. Finally, the numerical results are provided to reveal the effect of explicit micromechanical models on natural fundamental frequencies.

• Archives of Plastic Surgery
• /
• 제45권4호
• /
• pp.319-324
• /
• 2018

Perforator flaps are becoming increasingly common, and as primary thinning techniques are being developed, the need for secondary contouring of flaps is decreasing. However, many reconstructive flap procedures still incorporate secondary debulking to improve the functional and aesthetic outcomes. Direct excision, liposuction, tissue shaving with an arthroscopic cartilage shaver, and skin grafting are the four major methods used for secondary debulking. Direct excision is primarily applied in flaps where the skin is redundant, even though the volume is not excessive. However, due to the limited range of excision, performing a staged excision is recommended. Liposuction can reduce the amount of subcutaneous tissue of the flap and protect the vascular pedicles. However, the main drawback of this method is its limited ability to remove fibrotic tissues, for which the use of a shaver may be more convenient. The main drawback of using a shaver is that it is difficult to simultaneously remove excess skin. Skin grafting enables the removal of sufficient excess tissue to recover the contour of the normal limb and to improve the color match, facilitating excellent aesthetic results.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.169-177
• /
• 2009

Concurrent Engineering (CE) has presented new possibilities for successful product development by incorporating various product life-cycle functions from the earlier stage of design. In the product design, geometric representation is vital not only in its traditional role as a means of communicating design information but also in its role as a means of externalizing designer's thought process by visualizing the design product. During the last dozens of years, there has been extraordinary development of computer-aided tools intended to generate, present or communicate 3D models. However, there has not been comparable progress in the development of 3D-CAD systems intended to represent and manipulate a variety of product life-cycle information in a consistent manner. In the previous research, the authors proposed a novel concept called Minus Volume (MV) to incorporate various design information relevant to product life-cycle functions. This paper proposes the use of the MV concept for the collaborative design environment, where many team members are geographically distributed over the networked environment, including Internet, Intranet, WWW, etc. A prototype 3D-CAD system is implemented based on the MV concept and illustrated with the successful implementation of collaborative design example.

• Molecules and Cells
• /
• 제26권4호
• /
• pp.356-361
• /
• 2008

In this work, we have studied the structural and functional linkage between lamin A/C, nuclear actin, and organization of chromosome territories (CTs) in mammary carcinoma MCF-7 cells. Selective down-regulation of lamin A/C expression led to disruption of the lamin A/C perinuclear layer and disorganization of lamin-bound emerin complexes at the inner nuclear membrane. The silencing of lamin A/C expression resulted in a decrease in the volume and surface area of chromosome territories, especially in chromosomes with high heterochromatin content. Inhibition of actin polymerization led to relaxation of the structure of chromosome territories, and an increase in the volumes and surface areas of the chromosome territories of human chromosomes 1, 2 and 13. The results show an important role of polymeric actin in the organization of the nuclei and the chromosome territories.