• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.985-994
• /
• 2018

Bio-heavy oil for power generation is a product made by mixing animal fat, vegetable oil and fatty acid methyl ester or its residues and is being used as steam heavy fuel(B-C) for power generation in Korea. However, if the fuel supply system of the fuel pump, the flow pump, the injector, etc., which is transferred to the boiler of the generator due to the composition of the raw material of the bio-heavy oi, causes abrasive wear, it can cause serious damage. Therefore, this study evaluates the fuel characteristics and lubricity properties of various raw materials of bio-heavy oil for power generation, and suggests fuel composition of biofuel for power generation to reduce frictional wear of generator. The average value of lubricity (HFRR abrasion) for bio-heavy oil feedstocks for power generation is $137{\mu}m$, and it varies from $60{\mu}m$ to $214{\mu}m$ depending on the raw materials. The order of lubricity is Oleo pitch> BD pitch> CNSL> Animal fat> RBDPO> PAO> Dark oil> Food waste oil. The average lubricity for the five bio-heavy oil samples is $151{\mu}m$ and the distribution is $101{\mu}m$ to $185{\mu}m$. The order of lubricity is Fuel 1> Fuel 3> Fuel 4> Fuel 2> Fuel 5. Bio-heavy oil samples (average $151{\mu}m$) show lower lubricity than heavy oil C ($128{\mu}m$). It is believed that bio-heavy oil for power generation is composed of fatty acid material, which is lower in paraffin and aromatics content than heavy oil(B-C) and has a low viscosity and high acid value, resulting in inhibition of the formation of lubricating film by acidic component. Therefore, in order to reduce friction and abrasion, it is expected to increase the lubrication of fuel when it contains more than 60% Oleo pitch and BD pitch as raw materials of bio-heavy oil for power generation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.264-274
• /
• 1993

This study was carried out to assess the agronomic characters and physicochemical properties of floury and chalky-endosperm mutant lines induced by chemical mutagen treatment to rice varieties, Hwacheongbyeo and IR24. Linkage analysis of a floury-endosperm gene was carried out using linkage testers. The grain size of brown rice of the mutants was smaller than that of the original varieties. The l, 000-grain and 1$\ell$ weight were lighter in the mutants compared with those in the original varieties. The compound starch granules in the endosperm cell of the mutants showed a loosely-packed crystalline structure. Amylose contents in mutants ranged from 16.9 to 28.5%. Crude protein contents of the mutants were not significantly different from the original rice variety, Hwacheongbyeo, but white core mutant(line 47106) derived from IR24 showed higher protein(l1.32%) compared with IR24(8.30%). The mutants showed slightly harder gel characteristics, and much lower viscosity in Amylograph than original varieties. Steamed rice-cakes from mutant lines showed greater volume than those from original varieties. During the process of alcohol fermentation, Brix in the mutants(especially floury mutants) decreased faster and the alcohol production after 10-day fermentation was much greater in the mutants than in the original varieties. Three different gene loci for floury endosperm characteristics were identified from the allelism test among mutant lines, and the genes were tentatively symbolized as flo-a, flo-b and flo-c, respectively. A floury gene, flo-a, was linked with lg(liguleless) gene in the linkage group N, with R.V. 5.76$\pm$1.72%.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.147-152
• /
• 2016

This study was conducted to investigate the physicochemical quality properties and provide basic data for the activation of traditional Kamju of juice type product prepared by mixing malt and extruded rice collet powder. Malt extracts were prepared by extracting the mixture of malt and water at a weight ratio of 25:75 after soaking for 2 h at $45^{\circ}C$. Rice collet powder was prepared by adjusting the barrel temperature to $95^{\circ}C$, screw speed to $3.07{\times}g$, discharge port diameter to 7 mm and a raw material input to 50 kg/h, the powder was then ground to a particle size of 80 mesh. The physicochemical characteristics (pH, color, viscosity, reducing sugars, number of viable cells, free amino acids) and sensory evaluations were conducted at various time points during the saccharification and at different mixing ratios of the extruded rice collet powder to malt extract (5:95, 15:85, 25:75, 35:65, each at $55^{\circ}C$ for 9 h). As a result, with an increase in the proportion of the extruded rice collet powder and saccharification time, the physicochemical properties of traditional Kamju significantly improved (p<0.05). A mixing ratio of 35:65 rice collet powder to malt extract and a saccharification time of 9 h were found to be the most desirable conditions. However, based on the sensory evaluation, a mixing ratio of rice collet powder and malt extract of 25:75 and a saccharification time of 5 h resulted in the most preferable palatability of traditional Kamju (p<0.05). Therefore, the mixing ratio and saccharification time should be determined to provide a better choice with respect to the taste and economic aspects of traditional Kamju.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.494-500
• /
• 2003

The effects of $Al_2$O$_3$ addition upon the sintering range of clay-EAF dust (the specified wastes produced from steel making process) system body which would be used as a constructing bricks were investigated. The slope of apparent density to sintering temperature decreased for Clay-dust body containing 5~15 wt% A1203 sintered at 1200-125$0^{\circ}C$, and the absorption(%) of specimen sintered above 125$0^{\circ}C$ decreased due to the formation of open pores produced by pore bloating. For the specimen without any $Al_2$O$_3$ addition sintered at 1275$^{\circ}C$, the major phase was cristobalite, the small amount of mullite (3Al$_2$O$_3$ 2SiO$_2$) formed and the hematite (Fe$_2$O$_3$) remained. In the Clay-dust system body containing $Al_2$O$_3$ 15 wt%, however, the cristobalite disappeared and the major phase was mullite. Also the part of $Al_2$O$_3$ reacted with hematite to form hercynite (FeAl$_2$O$_4$). From the these results, addition of $Al_2$O$_3$ to Clay-dust system body enlarges a sintering range; decreasing an apparent density and absorption slop to sintering temperature owing to consumption of liquid phase SiO$_2$ at higher temperature and gas-forming component Fe$_2$O$_3$ at reduced atmosphere which would decrease an amount of liquid formed and increase the viscosity of the liquid produced during the sintering process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.103-108
• /
• 2008

To develop an optimal composite recipe for a functional abalone porridge including abalone viscera, this study investigated the effects of added viscera on the physical, textural and sensory characteristics of the porridge. Several kinds of abalone porridge were prepared with 1%, 2%, 3%, 4%, or 5% of the viscera (w/w) and with round rice, half rice, or ground rice. pH of the porridge with half and ground rice decreased with increasing amounts of the viscera. TBARS value increased with increasing size of rice and increased with increasing amount of the viscera in the porridge with round and ground rice. Yellowness of the porridge increased significantly by the addition of the viscra. Among the four textural properties, consistency and firmness increased with increasing size of rice; in contrast, viscosity and cohesivness decreased with increasing size of rice. However, textural properties of the porridge were not significantly different by the addition of the viscera. In the sensory evaluation, sensory scores of the porridge with round and half rice were higher than with round rice for texture, taste and total. In conclusion, concerning overall sensory evaluation, round rice porridge with 2% viscera, half rice porridge with 3% viscera and ground rice porridge with 4% viscera showed the best results, implying that developing functional abalone porridge using the viscera may be worthy.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.16-28
• /
• 2015

The purpose of this study, as a part of developing a new french dressing, was to present the best conditions to make improved kiwi dressing, suitable for the tastes of modern people, the processing and cooking methods of different ratios of green kiwi and gold kiwi have been sought to develop a new type of dressing, then its antioxidant have been defined, and used for producing kiwi dressing. Each 150g of different Kiwi purees, made based on the most preferable combinations from the pre-test were used for kiwi dressing, and thereafter its quality characteristics, and physical properties were investigated, as well as a sensory test was conducted. The highest viscosity of kiwi dressing was test sample GD2, and in general that of combining both types of kiwis were higher than that of either single kiwi. The sugar content was decreased by changing the Gold kiwi portion(p<0.05). The chromaticity in general increased with increases in the Gold kiwi portion, and a-value(brightness) and b-value(redness) of sample GD1 were the highest by -2.75 and 17.50(p<0.05). From the acceptability test, the highest overall acceptability was the dressing sample combining Gold kiwi and Green kiwi at a ratio of 1:1. Based on the study results, it is expected that the dressing, made of kiwi puree, mixing Green kiwi and Gold kiwi by 1:1 ratio, and adding 130g of edible oil, 50g of onion, 40g of sugar, and 5g of salt, would improve the quality and overall acceptability of the dressing.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.135-145
• /
• 1983

This study was conducted to obtain the fundamental data for the processing of carrot juices and know the effects of blanching conditions, acid and alkali treatments and sterilization on the quality factors of carrot juices. The result obtained was as follows. 1. Blanching condition, $100^{\circ}C$, 5min. was the most effective for the Brix, amino-N content, suspended solid, light transmittance and yield of carrot juices among $90^{\circ}C$, 15min., $95^{\circ}C$, 10 min., and $100^{\circ}C$, 5min. 2. 0.05N-acetic acid solution was the most effective blanching solution for the suspended solid, light transmittance, viscosity and yield of the juices compared to 0.05N-citric acid and 0.03N-hydrochloric acid solution. 3. The color changes during the processing of carrot juices caused by blanching process rather than sterilization process. 4. The ${\beta}$-carotene in carrot juices was very stable and about 80 % of it was remained in the carrot juice which had been blanched, extracted and sterilized at $115^{\circ}C$ for 30min. 5. Alkali treatment for the juice from acid - blanched carrots formed discoloration after sterilization. 6. Relative content (%) of sugars in raw carrot juice we re ribose, 8.51%; fructose. 10.15%; glucose, 12.25%; sucrose, 49.53% and oligosaccharide, 19.56%. When the carrots were blanched in boiling water, the contents of monosaccharide and disaccharide decreased slightly but that of oligosaccharide increased slightly, however, when the carrots were blanched in acid solution, and then neutralized and sterilized, relative contents of ribose and sucrose decreased remarkably but that of oligosaccharide increased considerably and those of glucose and fructose increased slightly. 7. Nineteen sorts of free amino acid were detected from the carrot juices and the mains of them were threonine+asparagine, alanine, serine+glutamine, aspartic acid, arginine, and glutamic acid.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.302-311
• /
• 2023

This study was conducted to evaluate the applicability of castor oil (CSO) as a natural wood preservative. CSO was treated into wood blocks prepared with domestic and imported wood species using a vacuum-pressure method, and then treatability, leachability and decay resistance of the CSO-treated wood blocks were examined. Although CSO was penetrated effectively into wood blocks of all wood species, the CSO-treatability was the highest in Western hemlock, followed by Japanese larch (LA), soft maple and Mongolian oak due to the difference of its anatomical structure. Except for LA, the more retained, the more leached during a saline water-immersing process for 48h. The use of ethanol added to reduce the viscosity of CSO affected negatively the treatability and leachability of wood blocks. Decay resistance, which was evaluated by the weight loss of wood blocks exposed against Fomitopsis palustris (FOP) and Trametes versicolor, of the CSO-treated/leached wood blocks was superior to that of control. Especially, most of wood blocks treated with preserving solution composed of only CSO (CSO-2) did not decayed and showed a very low weight loss against FOP. The decay resistance results from CSO retained in wood blocks after leaching. The retention of CSO could identify using the observation of X-ray microscope. Length of wood strips, which were treated with CSO-2 and then immersed in saline water for 2 weeks, hardly changed in all cutting directions. In addition, weight gain and length-swelling rate of the wood strips were extremely low compared to those of control. These results indicate that moisture resistance of the wood strips was improved by the CSO treatment. It is concluded that the treatment of CSO using a vacuum-pressure method provides the decay resistance and dimensional stability of wood, and thus CSO can be used as a natural wood preservative on various indoor and outdoor circumstances.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.321-325
• /
• 2002

For examination, amaranth was first dried its surface after sufficient soaking in water. Dried amaranth was roasted when the moisture contents reached 30∼50%, its nasty smell disappeared and its color turned to yellow and it was puffed. Pretreated amaranth was added to biscuit for the improvement of apparence and merchandise value. The maximum expansion was reported at the moisture percentage of 130∼160% according to the examination of expansion and moisture percentage. In order to compare gelatinization of different processing, three different amaranth were prepared as follows ; Raw amaranth, steamed/dried amaranth, and roasted amaranth. The degree of gelatinization was increased as the percentage of moisture was increased and the degree of gelatinization of roasted amaranth was higher than the one of steamed/dried amaranth, their moisture contents were 62.10% and 57.59%, respectively In addition, the hardness($\times$10$\^$5/dyn/㎠) of roasted amaranth was showed lower values than that of steamed amaranth and raw amaranth were showed the large values. After examining biscuits containing each amaranth, raw amaranth had problem with nasty smell and bad texture, and streamed/dried amaranth were able to remove viscosity but turned brown. Biscuits containing roasted amaranth had good smell and texture, and besides the color of biscuits became bright because roasted amaranth turned white. Biscuits tasted best when it contained 5% of roasted amaranth. The rancidity of biscuits with 5% roasted amaranth were proceeded slowly while roasted amaranth itself had high acid value and peroxide value. For the safety from oxidation, it was fairly safe for about 6 months.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.292-300
• /
• 2013

In this study, we examine the palatability and physicochemical properties of rice in the year, when there was 10% increase in yield compared to normal year due to daily temperature range and sunshine hours. The results of the analysis of rice yield over the last 20 years (1993-2012) showed 10% difference between the yield in 2000, which was normal, and that in 2001. With regard to the crop weather condition during the ripening period in 2001 compared to 2000, the daily range and sunshine hours were higher, but the mean temperature was similar. The rice yield in 2001 was 9.8% higher than that in 2000 due to the increased number of spikelets per panicles and ratio of ripened grain. In terms of chemical traits, protein, Mg, and K contents decreased in 2001 compared to 2000, but amylose content increased. Trough and final viscosity assessed with a Rapid Visco Analyser were significantly higher in 2001 than 2000. The quality of cooked rice was measured through the Toyo Mido Meter Glossiness Value (TGV) instead of a palatability score because a sensory test produces relative comparison values rather than absolute values. The correlation coefficients between the sensory evaluation parameters and the TGV in several rice materials harvested in two years showed a highly significant positive correlation ($r=0.81^{**}-0.89^{**}$, n=27-47). TGV was also significantly higher in 2001 than in 2000. The results suggested that the palatability of cooked rice was good in 2001 with about 10% increase in rice yield compared to normal year in 2000 due to daily temperature range and sunshine hours.