• Educational Technology International
• /
• v.6 no.1
• /
• pp.41-63
• /
• 2005

E-Learning is widely introduced with cyber universities in Korea from 2001 whencyber universities were first authorized by the Ministry of Education and Human Resource Development. E-learning amplified by cyber university gave a big impact in the campus based university which became the cause for the educational paradigm shift. The changes of status of cyber university shows important trend in college education which was analyzed by enrollment rate, types of cyber university, demography, and study areas. The enrollment rate of cyber universities is ever since 2001 and variety of study areas gives popularity to students. The demography of students is as expected older than traditional students. Female students at the cyber university outnumbered that at campus based university in Korea. For analyzing the trend of e-learning in Korea, there were studies twice in 2001 May-June from 213 faculty members and staff, 630 students and in 2004 May-June with 401 students. Most of e-learning students tent to spend less time yet, students feel more burden with e-learning. Professors tend to load more materials for the e-learning in 2001but in 2004 study, the difference no longer exists. Professors and students feel the academic achievement through e-learning is not as good as from the traditional classes. Difficulties for e-learning in 2001 were the lack of administrative information but in 2004, boring contents and lack of instructional strategies for e-learning. Technical problems still do exist but less serious. Suggestions for e-learning are blended learning, online students prefer video streaming with their own lecturer, new definition of instructor is needed, professional development for content development and online instruction is needed, success story of online learning should be encouraged, guidance for online students needed. The cyber university experiencegave a positive impact on the traditional universities such as rethinking the roles of universities, the quality control of classes, professional development, student oriented educational service of e-learning pedagogy.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2010

Zirconium diboride (ZrB2) and mixed diboride of (Zr0.7Ta0.3)B2 containing 30 vol.% silicon carbide (SiC) composites were prepared by hot-pressing at $1800^{\circ}C$. XRD analysis identified the high crystalline metal diboride-SiC composites at $1800^{\circ}C$. The TaB2 addition to ZrB2-SiC showed a slight peak shift to a higher angle of 2-theta of ZrB2, which confirmed the presence of a homogeneous solid solution. Elastic modulus, hardness and fracture toughness were slightly increased by addition of TaB2. A volatility diagram was calculated to understand the oxidation behavior. Oxidation behavior was investigated at $1500^{\circ}C$ under ambient and low oxygen partial pressure (pO2~10-8 Pa). In an ambient environment, the TaB2 addition to the ZrB2-SiC improved the oxidation resistance over entire range of evaluated temperatures by formation of a less porous oxide layer beneath the surface SiO2. Exposure of metal boride-SiC at low pO2 resulted in active oxidation of SiC due to the high vapor pressure of SiO (g), and, as a result, it produced a porous surface layer. The depth variations of the oxidized layer were measured by SEM. In the ZrB2-SiC composite, the thickness of the reaction layer linearly increased as a function of time and showed active oxidation kinetics. The TaB2 addition to the ZrB2-SiC composite showed improved oxidation resistance with slight deviation from the linearity in depth variation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.90-97
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of slope revegetation works according to the "Slope revegetation design and guidelines(proposed)" proposed by the Ministry of Construction and Transportation. To do this, a proper thickness of attaching soil media was identified in April experiment where the thickness and slopes varied. The results were as follows. In the test, the coverage rate of plot where exotic grass was not sowed increased with time and was 79.3% after three months of seeding, which indicated less risk of soil erosion. When applying the provisional standards of the plant mix proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found ill in the early stage in all test lands due to exotic grass. This was because exotic grass which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. When slope revegetation were planted and goals were set for herb, shrub and tree dominant mixture types, it was required to shift focus toward nursing up native plants first rather than early plantation of exotic grass.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.3
• /
• pp.639-652
• /
• 2015

In today's manufacturing environment, the process data can be easily measured and transferred to a computer for analysis in a real-time mode. As a result, it is possible to monitor several correlated quality variables simultaneously. Various multivariate statistical process control (MSPC) procedures have been presented to detect an out-of-control event. Although the classical MSPC procedures give the out-of-control signal, it is difficult to determine which variable has caused the signal. In order to solve this problem, data mining and machine learning techniques can be considered. In this paper, we applied the technique of decision tree learning to the MSPC, and we did simulation for MSPC procedures to monitor the bivariate normal process means. The results of simulation show that the overall performance of the MSPC procedure using decision tree learning technique is similar for several values of correlation coefficient, and the accurate classification rates for out-of-control are different depending on the values of correlation coefficient and the shift magnitude. The introduced procedure has the advantage that it provides the information about assignable causes, which can be required by practitioners.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.901-916
• /
• 2017

Recently, the industrial paradigm shift to the fourth industry has already begun, and the importance of patents as intangible intellectual property in the fourth industry era is increasing day by day. Since the technical valuation of a patent is calculated according to the opinion of experts, it is costly and time consuming, and hence, the quality of the patent is judged based on subjective opinions of non-experts. Therefore, it is necessary to develop an objective and rational evaluation system for the qualitative level of patents. In this paper, we classify the valuation of patents into technicality, rights, and usability, and consider the quantitative and objective evaluation modeling of patents using Bayesian structural equation model. In particular, based on the data collected by the Korea Invention Promotion Association, we apply the Bayesian approach, which is capable of stable modeling even under small samples by using prior information, and the structural equation model, which is excellent for modeling and evaluating qualitative performance that is difficult to measure directly, to develop a patent evaluation model.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.55-55
• /
• 2018

Recently, amorphous oxides such as InGaZnO (IGZO) and InZnO (IZO) as a channel layer of an oxide TFT have been attracted by advantages such as high mobility, good uniformity, and high transparency. In order to apply such an amorphous oxide TFTs to a display, the stability in various environments must be ensured. In the InGaZnO which has been studied in the past, Ga elements act as a suppressor of oxygen vacancy and result in a decreased mobility at the same time. Previous studies have been showed that the InZnO, which does not contain Ga, can achieve high mobility, but has relatively poor stability under various instability environments. In this study, the TFTs using $IZO/Al_2O_3$ double layer structure were studied. The introduction of an $Al_2O_3$ interlayer between source/drain and channel causes superior electrical characteristics and electrical stability as well as reduced contact resistance with optimally perfect ohmic contact. For the IZO and $Al_2O_3$ bilayer structures, the IZO 30nm IZO channels were prepared at $Ar:O_2=30:1$ by sputtering and the $Al_2O_3$ interlayer were depostied with various thickness by ALD at $150^{\circ}C$. The optimal sample exhibits considerably good TFT performance with $V_{th}$ of -3.3V and field effect mobility of $19.25cm^2/Vs$, and reduced $V_{th}$ shift under positive bias stress stability, compared to conventional IZO TFT. The enhanced TFT performances are closely related to the nice ohmic contact properties coming from the defect passivation of the IZO surface inducing charge traps, and we will provide the detail mechanism and model via electrical analysis and transmission line method.

• World Technopolis Review
• /
• v.4 no.1
• /
• pp.23-32
• /
• 2015

Public-private partnerships (PPPs) are very popular governance practices, as they enable the private partner to engage in business and have profits while the public partner improves the provision of public services. PPPs are organizational arrangements with a sector-crossing or sector-blurring nature, and are modes of governance - governance by partnerships or collaborative governance (Schuppert 2011). New models and applications of PPPs have been developed over time. Collaborative governance entails information exchange, action or movement harmonization, resource sharing, and capacity enhancement among the partners (Sale 2011; 2012a). As the national university, the University of the Philippines (UP) serves as a research university in various fields of expertise and specialization by conducting basic and applied research and development, and promoting research in various colleges and universities, and contributing to the dissemination and application of knowledge, among other purposes. (Republic Act 9500) It is the site of two (2) science and technology parks (Sale 2012b), one of which is the UP - Ayala Land Technohub. A collaboration between industry and the academe, the Technohub is envisioned as an integrated community of science and technology companies building a dynamic learning and entrepreneurial laboratory (UP-AyalaLand Technohub). This paper takes a closer look at the UP - Ayala Land Technohub as an example of a PPP or collaborative governance in science and technology parks. Have information exchange, action or movement harmonization, resource sharing, and capacity enhancement taken place in the Technohub? What are some significant outcomes of, and issues arising from, the PPP? What assessment indicators may be used? Is a governance instrument needed?

• Journal of Korean Neurosurgical Society
• /
• v.44 no.1
• /
• pp.1-7
• /
• 2008

Objective : The purpose of this study was to investigate the factors affecting the surgical outcome and to compare the surgical results between transsylvian and transcortical approaches in patients with putaminal hematomas. Methods : Retrospective review of charts and CT scan images was conducted in 45 patients (20 transsylvian and 25 transcortical approaches) who underwent open surgical evacuation of putaminal hematomas. Mean Glasgow coma scale (GCS) score and hematoma volume were $7.5{\pm}3.2$ and $78.1{\pm}29.3\;cc$, respectively. The factors affecting the functional mortality were investigated using a multivariate logistic regression analysis. In addition, surgical results between transsylvian and transcortical approaches were compared. Results : None of the patients had a good recovery after the surgery. Overall functional survival rate and mortality were 37.7% and 31%, respectively. The only risk factor for functional mortality was GCS motor score after controlling age, history of hypertension, side of hematoma, hematoma amount midline shift, presence of intraventricular hemorrhage and surgical approach (p=0.005). Even though a transcortical approach was shorter in operative time (4.4 versus 5.1 hour) and showed a higher mortality rate (40% versus 20%) and lower functional survival (45% versus 35%) compared to the transsylvian approach, the differences were not statistically significant between the two groups. Conclusion : In patients who have large amounts of hematoma and require open surgical evacuation, the only significant risk factor for functional survival is the preoperative GCS score. Cortical incision methods such as transsylvian and transcortical approaches have no influence on the surgical outcome. To decompress the swollen brain rapidly, transcortical approach seems to be more suitable than transsylvian approach.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.132-145
• /
• 2009

We present the framework for JND based Illumination and Color Restoration Using Edge-preserving filter for restoring distorted images taken under the arbitrary lighting conditions. The proposed method is effective for appropriate illumination compensation, vivid color restoration, artifacts suppression, automatic parameter estimation, and low computation cost for HW implementation. We show the efficiency of the mean shift filter and sigma filter for illumination compensation with small spread parameter while considering the processing time and removing the artifacts such as HALO and noise amplification. The suggested CRF (color restoration filter) can restore the natural color and correct color distortion artifact more perceptually compared with current solutions. For the automatic processing, the image statistics analysis finds suitable parameter using JND and all constants are pre-defined. We also introduce the ROI-based parameter estimation dealing with small shadow area against spacious well-exposed background in an image for the touch-screen camera. The object evaluation is performed by CMC, CIEde2000, PSNR, SSIM, and 3D CIELAB gamut with state-of-the-art research and existing commercial solutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1900-1911
• /
• 2015

In this paper, we introduce backscatter communication for power-limited sensors to enable long-range transmission in wireless sensor networks, and envision a way to avoid doubly near-far problem in wireless-powered communication network (WPCN) with this technology. In backscatter based WPCN, users harvest energy from both the signal broadcasted by the hybrid access point and the carrier signal transmitted by the carrier emitter in the downlink, and then transmit their own information in a passive way via the reflection of the carrier signal using frequency-shift keying modulation in the uplink. We characterize the energy-free condition and the signal-to-noise ratio (SNR) outage zone in backscatter based WPCN. Further, we propose backscatter based harvest-then-transmit protocol to maximize the sum-throughput of the backscatter based WPCN by optimally allocating time for energy harvesting and information transmission. Numerical results demonstrate that the backscatter based WPCN increases significantly the transmission range and diminishes greatly the SNR outage zone.