• Coupled systems mechanics
• /
• v.7 no.6
• /
• pp.755-774
• /
• 2018

The Ritz method is known as very successful strategy for discretizing continuous problems, but it has never been used for solving systems of algebraic equations. The Iterated Ritz Method (IRM) is a novel iterative solver based on the discretized Ritz procedure applied at each iteration step. With an appropriate choice of coordinate vectors, the method may be efficient in linear, nonlinear and optimization problems. Additionally, some iterative methods can be explained as special cases of this approach, which helps to understand advantages and limitations of these methods and gives motivation for their improvement in sense of IRM. In this paper, some ideas for generation of efficient coordinate vectors are presented. The algorithm was developed and tested independently and then implemented into the open source program FEAP. Method has been successfully applied to displacement based (even ill-conditioned) models of structural engineering practice. With this original approach, a new iterative solution strategy has been opened.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.724-729
• /
• 2001

This paper discusses the composition of the theory of reinforcement learning, which is applied in real-time learning, and evolutionary strategy, which proves its the superiority in the finding of the optimal solution at the off-line learning method. The individuals are reduced in order to learn the evolutionary strategy in real-time, and new method that guarantee the convergence of evolutionary mutations are proposed. It possible to control the control object varied as time changes. As the state value of the control object is generated, applied evolutionary strategy each sampling time because the learning process of an estimation, selection, mutation in real-time. These algorithms can be applied, the people who do not have knowledge about the technical tuning of dynamic systems could design the controller or problems in which the characteristics of the system dynamics are slightly varied as time changes. In the future, studies are needed on the proof of the theory through experiments and the characteristic considerations of the robustness against the outside disturbances.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1480-1489
• /
• 2017

In this study, a carrier-based pulse-width modulation (PWM) method for two-level voltage source inverters in the over-modulation region is proposed. Based on the superposition principle, the reference voltage vectors outside the linear modulation boundary are adjusted to relocate to the vector hexagon, while their fundamental magnitudes are retained. In accordance with the adjusted reference vector, the corresponding modulated waves are respectively deduced in over-modulation mode I and II to generate the gate signals of the power switches, guaranteeing the linearity of the fundamental output phase voltage in the over-modulation region. Moreover, due to the linear relationship between the voltage vector and the duty ratios, the complicated sector identification and holding angle calculation found in previous methods are avoided in the modulated wave synthesis, which provides great simplicity for the proposed carrier-based over-modulation strategy. Experimental results demonstrate the effectiveness and validity of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1218-1228
• /
• 1997

The move limit strategy is used to avoid the excessive approximation in the structural optimization. The size of move limit has been obtained by engineering experience. Recently, efforts based on analytic methods are performed by some researchers. These methods still have problems, such as prematurity or oscillation of the move limit size. The existing methods usually control the bound of design variables based on the magnitude. Thus, they can not properly handle the configuration variables based on the geometry in the configuration optimization. In this research, the size of move limit is calculated based on the accuracy of approximation. The method is coded and applied to the two-point reciprocal quadratic approximation method. The efficiency is evaluated through examples.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1000-1007
• /
• 2014

This paper proposes an on-line rotor time constant estimation strategy for indirect field oriented induction machines. The performance of the indirect field oriented control is dependent especially on the rotor time constant whose value varies according to the temperature. The proposed method calculates the difference between the nominal rotor time constant and the real value from the d- and q-axis integration terms of a proportional integral (PI) current regulator and the demanded voltages of the induction machine to regulate the current in the steady state. Because the proposed strategy has a simple structure and is available in wide speed and torque ranges, the proposed method can be easily used in the industrial field. The effectiveness of proposed strategy is verified with simulations and a 7.5kW experimental setup.

• Journal of Mechanical Science and Technology
• /
• v.15 no.11
• /
• pp.1482-1489
• /
• 2001

Thermally-induced errors originating from machine tool errors have received significant attention recently because high speed and precise machining is now the principal trend in manufacturing proce sses using CNC machine tools. Since the thermal error model is generally a function of temperature, the thermal error compensation system contains temperature sensors with the same number of temperature variables. The minimization of the number of variables in the thermal error model can affect the economical efficiency and the possibility of unexpected sensor fault in a error compensation system. This paper presents a thermal error model with minimum number of variables using a fuzzy logic strategy. The proposed method using a fuzzy logic strategy does not require any information about the characteristics of the plant contrary to numerical analysis techniques, but the developed thermal error model guarantees good prediction performance. The proposed modeling method can also be applied to any type of CNC machine tool if a combination of the possible input variables is determined because the error model parameters are only calculated mathematically-based on the number of temperature variables.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.5
• /
• pp.463-469
• /
• 2014

This paper proposes a maximum torque operation strategy for the direct torque control of a surface-mounted permanent-magnet synchronous motor (SPMSM). The proposed method analyzes the available operation region of the stator flux of the SPMSM under voltage and current constraints. Based on this analysis, the optimal stator flux trajectory that yields the maximum torque is obtained across the entire operation region, including constant torque and constant power regions. The proposed strategy is also applicable in the flux-weakening region II operation of the SPMSM, which has no speed limit. The validity of the proposed method is verified through experiments conducted on an 800 W SPMSM drive system.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.6-8
• /
• 1996

The multiobjective optimization is presented for the optimal design of induction motors. The aim of design is to find an optimized induction motor in terms of both the efficiency and the mass. The efficiency and the mass are linearly combined using the weighting factors. Optimization process is performed by using the improved (1+1) evolution strategy (ES). ES is the algorithm that can find the global minimum. To verify the validity of the proposed method. the method is applied to a sample design.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.106-115
• /
• 2015

This paper proposes a novel direct power control (DPC) strategy for neutral-point-clamped (NPC) three-level rectifiers, to directly control the active power, the reactive power and the neutral point potential of the rectifiers by referring to three pre-calculated vector influence tables and minimizing an objective function. In the three vector influence tables, the influences of different voltage vectors on the active power, the reactive power and the neutral-point potential are shown explicitly. A conceptual description and control algorithm of the proposed controller are presented in this paper. Then, numerical simulations and experiments are carried out to validate the proposed method. Both the simulation and experimental results show that good performances during both the steady-state and transient operating conditions are achieved. As a result, the proposed strategy has been proven to be effective for NPC three-level rectifiers.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.45-54
• /
• 2020

One of the typical characteristics of smart media is that it is interactive, which shows a different form and property from the existing mass media, and also changes the way users use it. This change requires a different system from the existing method in the advertising process strategic model for effective interactive advertising in smart media. We attempted to derive an effective smart media interactive advertising process strategic model by understanding the interactive advertising processin smart media that is expected to continue to grow asthe main market of the advertising market and identifying the constituent factors. To this end, We analyzed the preminiary research results of interactive advertising and organized expert panels for the Delphi method and reflected their opinions and evaluations. The components and factors of interactive advertising were found and the effective interactive advertising process strategy model in smart media was derived from this study.