• 접착 및 계면
• /
• 제15권3호
• /
• pp.93-99
• /
• 2014

본 Styrene (ST)과 sodium 1-allyloxy-2-hydroxypropane sulfonate (COPS-I)의 무유화 공중합을 다양한 중합조건(ST, COPS-I, KPS, DVB의 농도 및 중합온도)하에서 실시하여, 165~550 nm 입자경 범위의 단분산 라텍스를 제조하였다. 일반적으로 COPS-I와 KPS의 농도, 중합온도, DVB의 농도 등의 변화는 고분자 입자수(입자경), 중합속도, 분자량, 제타전위 등에 밀접한 영향을 미침을 발견하였다. 입자수의 증가는 중합속도와 제타전위를 증가시켰으나 분자량은 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3411-3420
• /
• 2014

Deficiencies in wear and frost resistance as well as mechanical strength constitute the main causes of equipment failure under the harsh climatic conditions of the Earth's polar regions. To improve the properties of the materials used in this equipment, nanoparticle composites have been prepared from clays such as kaolinite, hectorite, and montmorillonite in combination with polytetrafluoroethylene (PTFE) or ultrahigh molecular weight polyethylene (UHMWPE). A number of techniques have been proposed to disperse silicate particles in PTFE or UHMWPE polymer matrices, and several successful processes have even been widely applied. Polymer nanocomposites that exhibit enhanced mechanical and thermal properties are promising materials for replacing metals and glass in the equipment intended for Arctic use. In this article, we will review PTFE- and UHMWPE-based layered silicate nanocomposites.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.21-31
• /
• 2012

In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.101-108
• /
• 2012

음이온개시제인 $K_2S_2O_8$ (KPS)와 양이온개시제인 2,2' azobis(2-methyl-propionamidine) dihydrochloride (AIBA)를 이용하여 MMA와 BMA 단량체간의 무유화공중합을 성공적으로 수행하여 PSD가 1.002~1.008인 단분산성이 우수한 poly(BMA-co-MMA)와 PBMA 라텍스들을 제조하였다. 실험결과, 160~494 nm 범위의 수평균입자경과 (1.25~7.55) ${\times}10^4$ 범위의 수평균분자량을 나타내었다. MMA/BMA 유화중합에 따르는 중합속도와 단량체 및 개시제 농도, DVB/EGDMA 가교제 농도, 중합온도 변화에 따르는 수평균입자경과 수평균분자량의 영향을 조사하였다. MMA/BMA 단량체 중 MMA 농도가 증가함에 따라 중합속도가 증가하였으며 일반적으로 이들 라텍스의 평균입자경과 평균분자량은 MMA/BMA 단량체중량비, 단량체량, 개시제량, 중합온도에 따라 쉽게 조절됨을 발견하였다.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.

• 산업기술연구
• /
• 제20권A호
• /
• pp.29-36
• /
• 2000

The shape of the polymers in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(n-OC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts was examined by rheological measurements, and its relation with fiber drawing behavior of the solutions was described. It was found that fibers could be drawn in the viscosity range 1~100 P from the acid-catalyzed solutions with lower water contents of the molar ratio H2O/alkoxide, $r{\leq}2$. On the other hand, no fiber could be drawn from the acid-catalyzed solutions including a large amount of water($r{\geq}4$) and the base-catalyzed solutions. The relation between the intrinsic viscosity [${\eta}$] and number average molecular weight ${\bar{M}}n$, namely $[{\eta}]=K{\bar{M}}n{\alpha}$, has shown that the acid-catalyzed spinnable solution (r = 1 and 2) had linear polymers where the exponent a's were about 0.56 and 0.81, whereas non-spinnable solutions (r = 4 and 8) had three dimensional network polymers or spherical particles where the exponent a's were 0.41-0.51 and 0.35.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2979-2984
• /
• 2014

Silver nanoparticles have been synthesized by liquid-phase and alcohol reduction methods. Silver-doped silica-complex nanoparticles were prepared using a sol-gel process. The formation, structure, morphology, and particle size of the nanoparticles have been studied using several techniques. Silver nanoparticles of size of 30-40 nm were formed successfully by alcohol reduction. TEM images show that both the concentration and the molecular weight of polyvinyl pyrrolidone (PVP) considerably affect the size of the emerging silver nanoparticles. The number of silver-doped silica-complex particles increased by a mercapto-group treatment that showed a narrower size distribution than that of silica treated with amino groups. The silver/polyester and silver-doped silica/polyester masterbatch chips showed excellent antibacterial activity against Staphylococcus aureus and Escherichia coli.

• Molecular & Cellular Toxicology
• /
• 제5권1호
• /
• pp.75-82
• /
• 2009

Saengshik is an uncooked and powdered functional food composed of various edible plants, and has been consumed widely due to its health benefits and convenient uptake. Recently, superfine ground saengshik, which contains a certain extent of nanoscale particles, has been commercialized to enhance efficacy, but its safety has not been determined. This study was conducted to evaluate the food safety of superfine saengshik (SS) through general toxicity examination after oral uptake in mice compared to conventional fine saengshik (FS). The SS particle size distribution was 0.479-26.303 f.1m in diameter, with about 68.92% of particles with a diameter < $0.955{\mu}m$. From our safety evaluation, the number of white blood cells (WBCs) and biochemical values in the serum fell into the normal range, and the weight of organs showed no significant difference between FS and SS groups. Histological observation of the liver, small intestine and large intestine did not show any abnormal or pathological findings under light microscopy. Our results suggest that oral intake of SS is not harmful to mice in terms of general toxicity.

• Journal of Pharmaceutical Investigation
• /
• 제6권3호
• /
• pp.58-69
• /
• 1976

It is well established that dissolution is freruently the rate limiting step in the gastrointestinal absorpton of a drug from a solid dosage from. The relationship between the dissolution rate and absorption is particularly distinct when considering drugs of low solubility. Consequently, numerous attempts have been made to modify the dissolution characteristics of poorly water soluble drugs. Since dissolution rate is directly proportional to surface area, one may increase the rate by decreasing the particle size of the drug. Levy has considered a number of methods by which a drug may be presented to the GI fludids in finely divided from. The direct method is the utilization of microcrystalline or micronized particles. A second method involves the administration of solutions from which, upon dilution with gastric fluids, the dissolved drug will precipitate in the form of very fine particles. A more unique way of obtaining microcrystalline dispersions of a drug has been ercently suggested by Sekiguchi et al. They have first proposed the formation of a eutectic mixture of a poorly water soruble drug with a physiologically inert, easily soluble carrier. When such systems are exposed to water or GI fluids, the soluble carrier will dissolve rapidly and the finely dispersed drug particles will then be released. It has been suggested by Shefter and Higuchi that the formation of crystalline solvate could be a powerful tool in affecting rapid disslution of highly insoluble substances. Goldberg et al. have noted that the formation of solid solution could reduce the particle size to a minimum and increase the dissolution rate as well as the solubility of the durgs. It has also been shown that the rates of solution of drugs were appreciably increased by coprectipitating the drug with soluble polymers. The increase was found to be sensitive to the method of preparation, the molecular weight of polymer and the particular ratio of drugs to polymer. Although several investigations have demontrated that the solubility and/or dissolution rates of drugs can be increased in this manner, little information is available in the literature related to the in vivo absorption pattern of drugs orally administered as PVP coprecipitates. Recently, however, it was demonstrated that both the rate and extent of absorption of the insoluble drug could be markedly enhanced when orally administered to rats in the form of a coprecipitate with PVP. The purpose of the present investigation was to ascertain the general appility of soluble polymer coprectation technique as a method for enhancing the in vitro dissolution rate of hydrophobic indomethacin. To accomplish this aim, the dissolution characteristics of pure indomethacin, indomethcin-polymer physical mixtures and indomethacin-polymer coprecipitates were quantitatively studied by comparing their relative dissolution rates. The solubility and dissolution behavior of these systems were also examined.

• Applied Microscopy
• /
• 제35권1호
• /
• pp.15-22
• /
• 2005

진핵세포 내에 존재하는 metallothionein (MT)은 시스테인 함량이 높은 저분자량의 단백질로서 2가 금속이온들과의 친화력이 높아 중금속에 대한 해독작용, 금속이온의 대사 및 세포분열 등과 관련되어 있다. 본 연구자들은 간 재생능력이 우수한 흰쥐를 실험모델로 하여, 간의 70% 정도를 실험적으로 제거한 후, 간 재생을 유도하는 과정에서 시간 경과에 따라 간세포의 미세구조 변화와 더불어 MT 유전자 발현 및 이 단백질의 세포내 분포를 알아보고자 하였다. 부분 간 절제 후 간 조직이 증식되고 재구성되어 간이 원래의 크기로 재생되는 시간은 1주일 정도가 소요되었다. 재생중인 간세포는 핵대 세포질의 비가 크고, 핵내에 인이 크게 발달하고 크기가 작은 미토콘드리아가 다수 나타났으며, 조면소포체가 잘 발달하고 있었다. MT mRNA는 간 절제 직후부터 증가하기 시작하여 1시간 경과 후에 최대치에 이르렀고, 12시간 이후부터 감소하기 시작하였다. 재생중인 간세포에서 MT에 대한 면역반응은 간 절제 후 12시간이 경과한 군에서 가장 높게 나타났고, 이후 점차 감소하여 8일이 경과한 실험군에서는 정상 대조군과 유사한 정도로 감소하는 것으로 관찰되었다. 또한, 간 재생 초기에는 항-MT 금 입자들이 주로 세포질쪽에 분포하다가 점차 핵내에 존재하는 양이 증가하는 것으로 나타났다. 이러한 결과들은 간 절제 후 보상작용으로 일어나는 세포분열 단계에서 MT가 이 과정에 필요한 요소를 제공하는 역할을 수행하기 때문인 것으로 사료된다.