• 대한수학회논문집
• /
• 제18권1호
• /
• pp.127-131
• /
• 2003

Let X$_1$, X$_2$,... be a sequence of independent and identically distributed random variables with continuous cumulative distribution function F(x). X$_j$ is an upper record value of this sequence if X$_j$ > max {X$_1$,X$_2$,...,X$_{j-1}$}. We define u(n)=min{j$\mid$j> u(n-1), X$_j$ > X$_{u(n-1)}$, n $\geq$ 2} with u(1)=1. Then F(x) = 1-x$^{\theta}$, x > 1, ${\theta}$ < -1 if and only if (${\theta}$+1)E[X$_{u(n+1)}$$\mid$X$_{u(m)}$=y] = ${\theta}E[X_{u(n)}$\mid$X_{u(m)}=y], (\theta+1)^2E[X_{u(n+2)}$\mid$X_{u(m)}=y] = \theta^2E[X_{u(n)}$\mid$X_{u(m)}=y], or (\theta+1)^3E[X_{u(n+3)}$\mid$X_{u(m)}=y] = \theta^3E[X_{u(n)}$\mid$X_{u(m)}=y], n $\geq$ M+1$.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.511-517
• /
• 2001

We evaluated the electrical properties of 37 multifilamentary jointed tapes processed by superconducting joint. In the superconducting joining method, a lap-joint was used. Tapes were selectively etched, and exposed superconducting cores of the two tapes were brought into contact with each other and then only the joined region was uniaxially pressed in the range of 1,000 to 2,50 MPa. The critical current ratio(CCR) and n-value of the jointed tape were evaluated as a function of uniaxial pressure and number of step in the contacting region. It was observed that the CCR was dependent on the number of step, but almost independent of uniaxial pressure. The highest critical current ratio and n-value were obtained to be 58% and 26%, respectively, for the jointed tape to the tape itself.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.426-429
• /
• 2010

The Influence of the character of fly ash on the fluidity of cement paste with a polycarboxylic acid type superplasticizer was investigated in connection with the particle size distribution, unburned carbon content, specific surface area and shape of the fly ash. The fluidity of the fly ash cement paste with an added 20 vol% fly ash increases with an increasing roundness of the fly ash and it decreases with an increasing n-value of the fly ash cement. There is a linear correlation between the roundness/n-value and the fluidity of fly ash cement paste.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.40-45
• /
• 2009

With the increase in the annealing temperature, the volume fraction of austenite phase increased and the volume fraction of ferrite phase decreased. In compliance with the addition of N, not only the volume fraction of austenite phase was increased but also the austenite structure was made larger. Volume fraction of ${\sigma}$ phase was increased by decreasing of the volume fraction of ferrite phase, with the increase in the aging time and in compliance with the addition of N. As increasing in volume fraction of ${\sigma}$ phase, tensile strength and hardness increased, while elongation and impact value decreased. Elongation slowly decreased and impact value rapidly decreased at the early stage of aging. By the added N, tensile strength, elongation, hardness and impact value was increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.50-54
• /
• 2002

Influences of bending strain on the critical current ($I_c$) in Ag-sheathed Bi-2223 superconducting tapes at 77K were investigated. The effect of bending mode on the bending strain characteristics was discussed in viewpoints of sample geometry, n-value and damage morphology. Especially, in this paper, we reported the $I_c$ behavior in Ag alloy sheathed Bi-2223 multifilamentary superconducting tapes under hard bending. As a result, $I_c$ degradation behavior of the hard bending appeared remarkably than the case of easy bending, but it did not influence greatly on the n-value.

• 한국지반환경공학회 논문집
• /
• 제24권1호
• /
• pp.5-14
• /
• 2023

본 연구에서는 설계 대상인 현장타설말뚝기초에 대하여 상사율을 고려한 하중전이 대형토조 모형시험과 3차원 수치해석을 수행함으로써 현장타설말뚝 선단부와 주면부의 하중전이 특성을 분석하고 하중분담율을 산정하였다. 대형토조 모형시험 및 3차원 수치해석 결과에서 나타난 현장타설말뚝의 선형적 거동으로부터, 본 연구의 설계 조건에 대한 주면하중전이곡선은 Baquelin 등의 제안식, 선단하중전이곡선은 Baquelin 등의 제안식, 수평하중전이곡선은 Reese 등의 제안식이 적정한 것으로 확인되었다. 암반근입부에서 축하중은 시험값이 수치해석값보다 약간 크게 측정되었지만 암반 근입부에서 하중분담율은 연직하중이 증가함에 따라 평균적으로 약 27.8%의 분담율을 나타내었다. 연직재하 시에 말뚝두부의 침하량은 해석값이 시험값보다 약간 작게 평가되었으며, 모형시험 및 해석 최대 연직하중에서 말뚝두부의 최대 침하량은 시험치 10.6mm, 해석치 10.0mm 이고, 말뚝선단에서 최대 침하량은 시험치 2.0mm, 해석치 1.9mm로 나타났다. 수평재하 시에 기둥 두부(지표)와 말뚝 두부에서 수평변위는 시험값과 해석값이 비교적 잘 일치하는 것으로 나타났고, 모형토조시험 결과 최대 수평변위 38.0mm에서 측정된 수평하중은 24,713kN, 수치해석에서의 수평하중은 26,073kN으로 평가되었다.

• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.603-612
• /
• 2020

본 연구의 목적은 하지 혈관조영검사에서 매개변수인 관전류 (mA)와 SOD에 대한 조영제 농도(300, 320, 350) 희석률의 관계가 화질에 미치는 영향을 알아보는 데 있다. 이를 위해 말초혈관 직경 크기로 자체 제작한 3 mm 혈관모형 Water 팬텀을 이용하여, 관전류 (mA), SOD 변화와 조영제 농도(300, 320, 350) 희석률 변화의 관계를 SNR 값과 CNR 값으로 측정하고 변동계수를 (cv < 10) 분석하였다. SNR 값과 CNR 값의 측정에 사용된 소프트웨어는 Image J 1.50i, (NIH) National Institutes of Health, USA)로, PACS에 전송된 의료영상표준(DICOM, digital imaging and communications in medicine) 3.0 파일에서 팬텀에 대한 관심영역(ROI, region of interest)과 배경(Background)의 영상 신호를 수치적으로 확인한 후 평균 신호값(MPV, mean pixel value)과 표준편차(SD, standard deviation)를 이용하였다. 관전류 변화에 대한 조영제 농도별 희석률에서 관전류 (146 mA)과 관전류 (102 mA)의 SNR과 CNR 비교결과, SNR과 CNR 모두 CM : N/S 희석률 (100% ~ 30% : 70%) 구간까지 변동계수 값이 10 이하로 작게 나타났으나, CM : N/S 희석률 (20% : 80%~ 10% : 90%) 구간에서는 변동계수 값이 10 이상으로 나타났다. SOD 변화에 대한 조영제 농도별 희석률에서 SOD (32.5 cm)과 SOD (22.5cm)의 SNR과 CNR 비교 결과, SNR과 CNR 모두 CM : N/S 희석률 (100% ~ 30% : 70%) 구간까지 변동계수 값이 10 이하로 작게 나타났으나, CM : N/S 희석률 (20% : 80%~ 10% : 90%) 구간에서는 변동계수 값이 10 이상으로 나타났다. SOD 변화에 대한 조영제 농도별 희석률에서 SOD (32.5 cm)과 SOD (12.5cm)의 SNR과 CNR 비교 결과, SNR과 CNR 모두 CM : N/S 희석률 (100% ~ 30% : 70%) 구간까지 변동계수 값이 10 이하로 작게 나타났다. 그러나 CM : N/S 희석률 (20% : 80%~ 10% : 90%) 구간에서는 변동계수 값이 10 이상으로 나타났다. 결과적으로 인터벤션에서 하지 말초혈관조영술을 포함한 다른 검사나 시술에서 낮은 관전류 값을 설정하고, 테이블은 영상수상기에 최대한 가깝게 하여, 조영제 농도(300)을 CM : N/S 희석률 (30% : 70%)로 사용하는 것이 신장에 대한 부담과 피폭에 대한 부담을 동시에 줄이면서 적정 농도의 영상을 얻을 수 있는 가장 효율적인 방법으로 제시한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.656-665
• /
• 2010

Shear modulus has been recognized as one of the important soil properties in dynamic analysis of ground and can be calculated from in situ measurement of shear wave velocity. Field seismic tests are the most accurate but expensive methods to investigate dynamic ground characteristics. Due to that reason, empirical equations for estimating the shear wave velocity are widely used rather than conducting in-situ tests. The most common equations are based on the N value obtained in conjuctions with a standard penetration test. In this paper, the field datas of standard penetration test and suspension PS logging measured in 126 sites of Korea were summarized and the correlation equations between N value and shear wave velocity are suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.256-259
• /
• 2004

In the present study, AZ31B sheets has a bad formability in room temperature, but the formability is improved significantly as increasing the temperature because of rolled magnesium alloy sheet has a hexagonal closed packed structure (HCP) and a plastic anisotropy. In this paper, after tensile test in various temperatures, strain rate, show the tensile mechanical properties, yield and ultimate strength, K-value, work hardening exponent(n), strain rate sensitivity(m). As temperature increased, yield, ultimate strength and K-value, work hardening exponent(n) are decreased but strain rate sensitivity(m) is increased. As cross-head-speed increased, yield, ultimate strength and K-value, work hardening exponent(n) are increased. And according to the temperature, how change the plastic anisotropy factor R. In addition, we observed how temperatures and cross-head-speed effect on microstructure.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.27-34
• /
• 2000

HTS wires processed by PIT method are now available for magnet applications. But, those wires can not be used over 40 K due to weak link. This leads to necessity of development of coated conductor which can retain high $J_c$ at high field in liquid nitrogen. In this paper, various technical issues and the R&D status for both PIT wires and coated conductor were discussed. The difference of coated conductor's processes were also investigated and summarized. Various requirements for a design of HTS magnets were discussed. Anisostropic $J_c$ property with respect to magnetic field was considered to determine the coil's critical current. Low n value is a critical parameter to degrade a field stability with respect to time for a persistent mode HTS magnet. The relation between the margin of operation current and n value was investigated. Prototype HTS magnets with PIT wires are being developed for various applications such as crystal growth, MRI, magnetic separator and etc. HTS magnets will come into wide use in various fields of industries if the HTS wires with a low performance cost is developed.