• 한국소음진동공학회논문집
• /
• 제20권2호
• /
• pp.172-178
• /
• 2010

The multiple regression analysis and path analysis in each dominant area of noise source are conducted to analyze the relationship between dependent variables like annoyance and independent ones such as noise and non-noise factors. The multiple regression analysis shows that impact of noise factors is the highest to annoyance in dominant areas of road traffic and railway noise. Meanwhile, impact of non-noise factors such as sensitivity and satisfaction of environment on annoyance is also high in these areas. The path analysis result for multivariate analysis between various independent and dependent variables is similar to that of the multiple regression analysis. However, noise factor is the greatest factor influent on annoyance in the dominant areas of the combined noise, and relationship between annoyance and sensitivity is the highest in combined area exposed to road traffic noise and railway noise.

• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.99-106
• /
• 2013

본 연구에서는 일반국도 상에 존재하는 2종 비탈면 104개소에 대해 상태평가 항목과 상태평가 등급의 연관성을 분석하고, 평가항목을 고려한 다중회귀분석을 통해 안전등급을 예측할 수 있는 회귀모형을 제시하였다. 분석결과, 사면경사와 강우 및 지하수의 평가항목은 상태평가 등급과의 연관성이 낮은 것으로 분석되었다. 또한, 다중회귀분석을 통해 제시된 회귀모형은 절취상태, 강우 및 지하수의 항목을 판단하기 어려운 조건에서 활용이 가능한 것으로 판단된다.

• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.31-36
• /
• 2014

In this study, the influence of the control and operational parameters within a sewage treatment plant were reviewed by performing multiple regression analysis on the effluent quality of the sewage treatment. The data used for this review are based on the actual data from a sewage treatment plant using the media process within the year 2012. The prediction models of chemical oxygen demand ($COD_{Mn}$) and total nitrogen (T-N) within the effluent of the 2nd settling tank based on the multiple regression analysis yielded the prediction accuracy measurements of 0.93 and 0.84, respectively; and it was concluded that the model was accurately predicting the variances of the actual observed values. If the data on the energy spent on each operating condition can be collected, then the operating parameter that conserves energy without violating the effluent quality standards of COD and T-N can be determined using the regression model and the standardized regression coefficients. These results can provide appropriate operation guidelines to conserve energy to the operators at sewage treatment plants that consume a lot of energy.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.20-25
• /
• 2004

Using the multiple regression analysis cutting forces of turning processes have been predicted based on the cutting conditions such as feed rate(f), depth of cut(d), and cutting velocity(v). The statistical inference of the equation was checked by ANOVA test. The validity of the proposed regression analysis was verified by two sets of cutting tests of 27 cutting conditions and the additional cutting tests of 18 cutting conditions. From the results of analytical and experimental studies, it was found that there was no significant difference between the measured and predicted cutting forces. Also, the shear and friction characteristics of turning processes were analyzed with predicted cutting forces.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1443-1450
• /
• 2015

Wastewater treatment plant(WWTP) has been recognized as a high energy consuming plant. Usually many WWTPs has been operated in the excessive operation conditions in order to maintain stable wastewater treatment. The energy required at WWTPs consists of various subparts such as pumping, aeration, and office maintenance. For management of energy comes from process operation, it can be useful to operators to provide some information about energy variations according to the adjustment of operational variables. In this study, multiple regression analysis was used to establish an energy estimation model. The independent variables for estimation energy were selected among operational variables. The $R^2$ value in the regression analysis appeared 0.68, and performance of the electric power prediction model had less than ${\pm}5%$ error.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.614-619
• /
• 2005

The object of this study was to presented regression equations for obtaining simply and quickly values of water quality items, BOD, COD, T-N, and T-P. Regression equations obtained to analyze relationships for water quality items to land use types in agricultural reservoir watersheds. In order to derive regression equations, a multiple linear regression analysis was used in this studying reservoirs. In this regression analysis, a independent values used land used types and dependent values used BOD, COD, T-N, T-P values in water quality items. The results showed that numbers of regression equation ranging above 0.90 in a multiple correlation coefficient (MCC) was not found, ranging from 0.70 to 0.90 in the MCC was 6, ranging from 0.40 to 0.70 in the MCC was 20, and ranging from 0.20 to 0.40 in the MCC was 4. The results of this study can be used as a basic information for evaluating simply and quickly water quality for proposing and designing steps in water quality policy.

• Food Science and Biotechnology
• /
• 제14권5호
• /
• pp.656-660
• /
• 2005

The relationship between the gas chromatographic (GC) patterns of sauce made of barley bran and ranked order in sensory analysis was investigated by multiple regression analysis (MRA). Most of the 42 barley bran sauce samples comprised about 34 peaks, in which the content of 9, 12-octadecanoic acid methyl ester was the highest, followed by those of 2-furanmethanol and 2-furancarboxaldehyde. It is difficult to estimate the aroma quality of barley bran sauce samples on the basis of only one peak. The 34 aroma compounds of the 42 samples were analyzed by an MRA model featuring six transformations. The most precise fit was calculated from the absolute value transformed with the root square of each peak, and the multiple determination coefficient showed that 91.6% of the variation in the sensory score could be explained on the basis of GC data.

• 한국수자원학회논문집
• /
• 제41권3호
• /
• pp.325-340
• /
• 2008

본 연구는 저수량 지역 빈도분석(regional low flow frequency analysis)을 수행하기 위하여 일반최소자승법(ordinary least squares method)을 이용한 Bayesian 다중회귀분석을 적용하였으며, 불확실성측면에서의 효과를 탐색하기 위하여 Bayesian 다중회귀분석에 의한 추정치와 t 분포를 이용하여 산정한 일반 다중회귀분석의 추정치의 신뢰구간을 비교분석하였다. 각 재현기간별 비교결과를 보면 t 분포를 이용하여 산정된 평균 추정치와 Bayesian 다중회귀분석에 의한 평균 추정치는 크게 다르지 않았다. 그러나 불확실성 측면에서 평가해볼 때 신뢰구간의 상한추정치와 하한추정치의 차이는 Bayesian 다중회귀분석을 사용한 경우가 기존 방법을 사용한 경우보다 훨씬 작은 것으로 나타났으며, 이로부터 저수량(low flow) 지역 빈도분석을 수행하는 경우 Bayesian 다중회귀분석이 일반 회귀분석보다 불확실성을 표현하는데 있어서 우수하다는 결과를 얻을 수 있었다. 또한 낙동강 유역에 2개의 미계측 유역을 선정하고 구축된 Bayesian 다중회귀모형을 적용하여 불확실성을 포함한 미계측 유역에서의 저수량(low flow)을 추정하였으며 이와 같은 방법이 미계측 유역에서의 저수(low flow) 특성을 나타내는 데 있어서 효과적일 수 있음을 입증하였다.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.653-661
• /
• 2007

Overseas construction projects tend to be more complex than domestic projects, being exposed to more external risks, such as politics, economy, society, and culture, as well as more internal risks from the project itself. It is crucial to have an early understanding of the project condition, in order to be well prepared in various phases of the project. This study compares a structural equation model and multiple regression analysis, in their capacity to predict cost performance of international construction projects. The structural equation model shows a more accurate prediction of cost performance than does regression analysis, due to its intrinsic capability of considering various cost factors in a systematic way.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.152-161
• /
• 2002

The analysis of large data sets with hundreds of thousands observations and thousands of independent variables is a formidable computational task. A less parametric method, capable of identifying important independent variables and their interactions, is a tree structured approach to regression and classification. It gives a graphical and often illuminating way of looking at data in classification and regression problems. In this paper, we have reviewed and summarized tile methodology used to construct a tree, multiple trees and the sequential strategy for identifying active compounds in large chemical databases.