• Journal of Broadcast Engineering
• /
• v.27 no.1
• /
• pp.146-149
• /
• 2022

In this letter, we propose low-complexity Hybrid-Partial-Gaussian-Approximation (HPGA) decoding methods for core-layer signal of Layered-Division-Multiplexing Multiple-Inputs-Multiple- Outputs ATSC 3.0 broadcasting systems. The proposed HPGA decoding methods have an advantage of being able to greatly reduce decoding complexity without significant performance degradation compared to a conventional PGA method, by selectively using existing GA and PGA methods according to a received injection-level at an each receive antenna.

• Journal of Families and Better Life
• /
• v.24 no.6 s.84
• /
• pp.17-31
• /
• 2006

The purpose of this study was to develop the model of consumer satisfaction with educational services in higher education on the basis of expectation-disconfirmatiom theory. The major findings were as follows : 1. The level of consumer satisfaction with educational services in higher education was low. Among the four dimensions of the educational services in higher education, the level of consumer satisfaction was the highest with 'education' and lowest with cost. 2. In the model of national university, the perceived performance of the core service, the disconfirmation of the core service, the perceived performance of the additional service, the disconfirmation of the additional service had a casual effect. The perceived performance of the additional service had the greatest casual effect among them. 3. In the model of private university, the perceived performance of the core service, the disconfirmation of the core service, the perceived performance of the additional service, the disconfirmation of the additional service had a casual effect. The perceived performance of the core service had the greatest casual effect among them.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.3
• /
• pp.232-237
• /
• 2017

Dentists often place post and core buildups on endodontically treated abutments for crown and bridge restorations. This article analyzes the bio-mechanical purposes, advantages and disadvantages of placing a core or a post and core in an endodontically treated tooth and reviews literature on post and core biomechanics. The author assesses the scientific rationale of the claim that the main purpose of a post is to retain a core, or the claim that posts weaken teeth. More likely, the main function of a post is to help prevent the abutment, on which a crown is cemented, from fracturing such that the abutment separates from the tooth root, at a fracture plane that is located approximately and theoretically at the level of the crown (or ferrule) margin. A post essentially improves the ferrule effect that is provided by the partial fixed denture prosthesis. This paper also explores the difference between bio-mechanical failures of crowns caused by lack of retention or excess taper, versus failures due to a sub-optimal ferrule effect in crown and bridge prostheses.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.241-256
• /
• 2015

Numbers of successful companies in the world develop The core values of action in order to produce effective human resource management and organization culture. Core values are belief, and values that are shared by all members to maintain organization. Also, The core values function as to inspire motivation and decision making for organization's identity and assist to settle their own unique culture. Therefore, this study is to figure out the effect of core values to the members of organization and management performance from small and medium company that is comparatively less focused to settle their own core values.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.11-17
• /
• 2012

In this study, an experiment with large-scale model was performed according to raising embankment in order to investigate the cause of collapse by a change in water level of reservoir. Also, the settlement and pore water pressure by high water level and a rapid drawdown were compared and analyzed. After raising embankment for inclined core, there was no infiltration by leakage. For the vertical core, the pore water pressure showed a largely change by faster infiltration of pore water than in the inclined core. In a rapid drawdown, inclined core was remained stable but vertical core showed a largely change in pore water pressure. A settlement after a raising embankment showed a larger measure of settlement than before the raising embankment. The leakage quantity before a raising embankment and an inclined extension showed no leakage. Leakage in vertical extension was measured 160 $l$. From the result, a instrument system that can accurately estimate a change of pore water pressure shall be established for a rational maintenance and stabilization of raising embankment for agricultural reservoir.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.446-449
• /
• 2000

A direct RTI(Rotation and translation invariant) fingerprint identification is proposed using the GCMs(generalized complex moments) and Gabor filter-based features from the grey level fingerprint around core point. The core point is located as reference point for the translation invariant matching. And its symmetry axis is detected for the rotation invariant matching from its neighboring region centered at the core point. And then, fingerprint is divided into non-overlapping blocks with respect to the core point and, in contrast to minutiae-based method using various processing steps, features are directly extracted from the blocked grey level fingerprint using Gabor filter, which provides information contained in a particular orientation in the image. The Proposed fingerprint identification is based on the Euclidean distance of the corresponding Gabor features between the input and the template fingerprint. Experiments are conducted on 300 ${\times}$ 300 fingerprints obtained from the CMOS sensor with 500 dpi resolution, and the proposed method could obtain 97% identification rate.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.9-17
• /
• 2006

We proposed a new High-speed CMOS Level Up/Down Shifter circuits that can be used with Dynamic Voltage and Frequency Scaling(DVFS) algorithm, for low power system in the SoC(System-on-Chip). This circuit used to interface between the other voltage levels in each CMOS circuit boundary, or between multiple core voltage levels in a system bus. Proposed circuit have advantage that decrease speed attenuation and duty ratio distortion problems for interface. The level up/down shifter of the proposed circuit designed that operated from multi core voltages$(0.6\sim1.6V)$ to used voltage level for each IP at the 500MHz input frequency The proposed circuit supports level up shifting from the input voltage levels, that are standard I/O voltages 1.8V, 2.5V, 3.3V, to multiple core voltage levels in between of $0.6V\sim1.6V$, that are used internally in the system. And level down shifter reverse operated at 1Ghz input frequency for same condition. Simulations results are shown to verify the proposed function by Hspice simulation, with $0.6V\sim1.6V$ CMOS Process, $0.13{\mu}m$ IBM CMOS Process and $0.65{\mu}m$ CMOS model parameters. Moreover, it is researched delay time, power dissipation and duty ration distortion of the output voltage witch is proportional to the operating frequency for the proposed circuit.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.1
• /
• pp.107-115
• /
• 2014

This paper evaluates and analyzes the performance of TILE-Gx36(Gx36), a many-core processor. The PARSEC parallel benchmark suite was used to measure the performance, and Core i7 (i7) and Atom are used for the performance comparison. When experimented with the maximum number of threads that can be executed concurrently on each machine, Gx36 showed a 2.73${\times}$ inferior performance to Core i7 and a 1.93${\times}$ superior performance to Atom. Gx36 has the largest Last Level Cache(LLC) among the compared processors. Nevertheless, it reported the biggest number of LLC misses, which, we strongly believe, is the major culprit for lower performance than expected. Our study suggests that the DDC employed in Gx36 is not a favorable cache structure for the general-purpose high-performance computing. The actual measurement with off-the-shelf machine provides non-biased data for polishing the future many-core architecture.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.212-212
• /
• 2012

The Coverage dependent attachment of multifunctional groups included in threonine molecules adsorbed to Ge (100)$-2{\times}1$ surface was investigated using core-level photoemission spectroscopy (CLPES) and density functional theory (DFT) calculations. The core-level spectra at a low coverage indicated that the both carboxyl and amine groups participated in the bonding with the Ge (100) surface by "O-H dissociated and N-dative bonded structure". However, at high coverage level, additional adsorption geometry of "O-H dissociation bonded structure" appeared possibly to minimize the steric hindrance between adsorbed molecules. Moreover, the C 1s, N 1s, and O 1s core level spectra confirmed that the carboxyl oxygen is more competitive against the hydroxymethyl oxygen in the adsorption reaction. The adsorption energies calculated using DFT methods suggested that four of six adsorption structures were plausible. These structures were the "O-H dissociated-N dative bonded structure", the "O-H dissociation bonded structure", the "Om-H dissociated-N dative bonded structure", and the "Om-H dissociation bonded structure" (where Om indicates the hydroxymethyl oxygen). These structures are equally likely, according to the adsorption energies alone. Conclusively, we investigate in threonine on Ge (100) surface system that the "O-H dissociated-N dative bonded structure" and the "O-H dissociation bonded structure" are preferred at low coverage and high coverage.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1217-1233
• /
• 2018

Following a surge of interest in multi-unit risk in the last few years, many recent studies have suggested methods for multi-unit probabilistic safety assessment (MUPSA) and addressed several related aspects. Most of the existing studies though focused on two-unit nuclear power plant (NPP) sites or used rather simplified probabilistic safety assessment (PSA) models to demonstrate the proposed approaches. When considering an NPP site with three or more units, some approaches are inapplicable or yield very conservative results. Since the number of such sites is increasing, there is a strong need to develop and validate practical approaches to the related MUPSA. This article provides several detailed approaches that are applicable to multi-unit Level 1 PSA for sites with up to six or more reactor units. To validate the approaches, a multi-unit Level 1 PSA model is developed and the site core damage frequency is estimated for each of four representative multi-unit initiators, as well as for the case of a simultaneous occurrence of independent single-unit initiators in multiple units. For this purpose, an NPP site with six identical OPR-1000 units is considered, with full-scale Level 1 PSA models for a specific OPR-1000 plant used as the base single-unit models.