• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.16-21
• /
• 2021

As the average age of national veterans has increased from 69 years old(2011) to 71 years old(since 2015) over the past five years, the overall medical service cost of veterans has increased by about 20%. The main cause of this phenomenon is 'ultra-aging', which accounts for 67% of veterans, while the proportion of health insurance patients aged 70 or older is 9%. Therefore, it is judged that the analysis of the trend of use of medical services at veterans hospitals in each region that is in charge of severe medical services of national veterans can serve as an opportunity to seek countermeasures for the severe medical system of national veterans. First of all, based on the details of major medical expenses (hospitalization, outpatient, pharmaceutical expenses) by region for the last 10 years(2010-2019), data significance was performed through a chi-square test, and the Central Veterans Hospital and Non-Central Veterans Hospital using EXCEL. 'Expected frequency' was calculated by year. By applying the CHITEST(observation frequency, expected frequency) function again, the p-value(p<0.05) was calculated, and the profit bias of each region's veterans hospital could be determined. The specific research method is for the last 10 years(2010-2019) for state-sponsored patients_outpatient treatment income, state-sponsored patients_hospitalization income, exempt patients_outpatients at the Central Veterans Hospital, Busan Veterans Hospital, Gwangju Veterans Hospital, Daegu Veterans Hospital, and Daejeon Veterans Hospital. A one-way analysis of variance was conducted to verify the significance of the difference between group averages on the status of 5 medical revenues of veterans hospitals in each of the 5 regions, including medical treatment income, reduced patients_hospitalization income, and reduced patients_medicine expenses. It was found to be significant(p<0.05) at all levels, including region and type. Finally, the bias in the profit structure of regional veterans hospitals was the highest in 2017(p=0.0004) and the lowest in 2013(p=0.0349). In addition, in the profit structure of the Veterans Hospital, the year in which the'regional' variable worked the most was 2019, and the year with the least affected was 2010. The order of the former is Jungang(=31,674,713), Busan(=12,314,614), Gwangju(=11,957,038), Daegu(=10,168,015), and Daejeon(=6,991,034), and the order of the latter is Jungang(=57,868,791), and Busan(=19,183,194). Gwangju(=17,904,712), Daegu(=15,656,034), and Daejeon(=14,377,395). In conclusion, the profit bias of veterans hospitals repeatedly raced the lowest(p=0.01986) and highest(p=0.03499) for the past five years(2010-2014) year by year, with the 'regional' variable being the most in the veterans hospital's profit structure It was identified as a major influence factor. On the other hand, for the last 5 years (2015-2019), the influence factors of the'regional' variable every year were in 2015(p=0.02015), 2016(p=0.01741), 2017(p=0.00045), and 2018(p=0.00394). in 2019(p=0.00227), a significant difference was confirmed at a very low level.

• Korean Journal of Microbiology
• /
• v.20 no.3
• /
• pp.125-133
• /
• 1982

Mutational experiments were performed to imporve the cellulase productivity of Aspergillus phoenicis KU175, isolated from the southern part of Korea, as a high cellulase producer. By treatment ultra-violet light nad 4-NQO(4-Nitroquinoline-N-Oxide), mutation waas induced, and treatment ultra-violet light and 4-NQO (4-Nitroquinoline-N-Oxide), mutation was induced, and A.phoenicis KU175-115 was finally selected for its highest avicelase production. Avicelase production of the mutant was increased about 2 times compared with those of the wild strain. However, activities of other hydrolytic enzymes, such as amylase, protease and nuclease, of the mutant strain didn't show a marked difference compared with those of the nuclease, of the mutant strain didn't show a marked difference compared with the wild strain, except slight increase in ribonuclease activity and slight decrease in glucoamylase activity. Avicelases from the mutant strain selected were purified from wheat bran culture by successive salting out, followed by dialysis and column chromatography, and their charcteristics were compared with thosw of the wild strain. Avicelase was separated into three peaks in the mutant strain as well as in the case of wild strain. Avicelase II activity of the mutant strain was prominently higher than that of the wild strain, while avicelase I and III activities of those were equivalent. The optimal pH ranges and stability of avicelase II from the mutant strain were pH4-5 and pH3.5-6.0, respectively, as well as in the case of the wild strain. The optimal temperature and thermal stability of avicelase II from the mutant strain were $40{\sim}50^{\circ}C\;and\;20{\sim}55^{\circ}C$, respectively. These results were same as those of the wild strain. By the using of Eadie-Hofastee plot, $K_m\;and\;V_{max}$ of avicelase II from the mutant and the wild strain were calculated to be 2.29mg/ml and $4.84{\mu}g$ reducing sugar as glucose per min equally, from the line fitted to the data by the least square method. Activity of avicelase II from the mutant strain was slightly activated by $Mg^{++}\;but\;inhibited\;by\;Cu^{++}, \;Mn^{++}\;and\;Zn^{++}$, as well as in the case of the wild strain. Therefore, it was concluded that the mutant didn't induce the formation of another avicelase isozyme, or the changes in the properties of avicelase, but induce the changes in the productively of the same avicelase II by the action of regulatory gane.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.23-31
• /
• 2010

The increasing demands on low-power, and low-complexity video encoder have been motivating extensive research activities on distributed video coding (DVC) in which the encoder compresses frames without utilizing inter-frame statistical correlation. In DVC encoder, contrary to the conventional video encoder, an error control code compresses the video frames by representing the frames in the form of syndrome bits. In the meantime, the DVC decoder generates side information which is modeled as a noisy version of the original video frames, and a decoder of the error-control code corrects the errors in the side information with the syndrome bits. The noisy observation, i.e., the side information can be understood as the output of a virtual channel corresponding to the orignal video frames, and the conditional probability of the virtual channel model is assumed to follow a Laplacian distribution. Thus, performance improvement of DVC systems depends on performances of the error-control code and the optimal reconstruction step in the DVC decoder. In turn, the performances of two constituent blocks are directly related to a better estimation of the parameter of the correlation channel. In this paper, we propose an algorithm to estimate the parameter of the correlation channel and also a low-complexity version of the proposed algorithm. In particular, the proposed algorithm minimizes squared-error of the Laplacian probability distribution and the empirical observations. Finally, we show that the conventional algorithm can be improved by adopting a confidential window. The proposed algorithm results in PSNR gain up to 1.8 dB and 1.1 dB on Mother and Foreman video sequences, respectively.

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1827-1833
• /
• 2014

This study has been carried out to present the valuation system of soil carbon sequestration potentials of soil in accordance with the new climate change scenarios(RCP). For that, by analyzing variation of soil carbon of the each type of agricultural land use, it aims to develop technology to increase the amount of carbon emissions and sequestration. Among the factors which affects the estimation of determining the soil carbon model and influence power after the measurement on soil organic carbon, under the center of a causal relationship between the explanatory variables this study were investigated. Chemical fertilizers (NPK) decreased with increasing the amount of soil organic carbon and as with the first experimental results, when cultivating rice than pepper, the fact that soil organic carbon content increased has been found out. The higher the carbon dioxide concentration, the higher the amount of organic carbon in the soil and this result is reliable under a 10% significance level. On the other hand, soil organic carbon, humus carbon and hot water extractable carbon has been found out that was not affected the soils depth, sames as the result of the first year. The higher concentration of carbon dioxide, the higher carbon content of humus and hot water extractable carbon content. According to IPCC 2006 Guidelines and the new climate change scenario RCP 4.5 and the measurement results of the total amount of soil organic carbon to the crops due to abnormal climate weather, 1% increase in atmospheric carbon dioxide concentration was found to be small when compared to the growing rate of increasing 0.01058% of organic carbon in the soil.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.161-173
• /
• 2005

Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and closed stance. The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle according to open stance patterns during forehand stroke in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVlEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head angle were defined 1. In three dimensional maximum linear velocity of racket head the X axis showed $11.41{\pm}5.27m/s$ at impact, not the Y axis(horizontal direction) and the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. the stance distance between right foot and left foot was mean $74.2{\pm}11.2m$. 2. The three dimensional anatomical angular displacement of shoulder joint showed most important role in forehand stroke. and is followed by wrist joints, in addition the movement of elbow joints showed least to the stroke. The three dimensional anatomical angular displacement of racket increased flexion/abduction angle until the impact. after impact, The angular displacement of racket changed motion direction as extension/adduction. 3. The three dimensional anatomical angular displacement of trunk in flexion-extension showed extension all around the forehand stroke. The angular displacement of trunk in adduction-abduction showed abduction at the backswing top and adduction around impact. while there is no significant internal-external rotation 4. The three dimensional anatomical angular displacement of hip joint and knee joint increased extension angle after minimum of knee joint angle in the forehand stroke, The three dimensional anatomical angular displacement of ankle joint showed plantar flexion, internal rotation and eversion in forehand stroke. it could be suggest that the plantar pressure of open stance during forehand stroke would be distributed more largely to the fore foot. and lateral side.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.5
• /
• pp.278-284
• /
• 2014

Water temperature due to climate change can be estimated using the air temperature because the air and water temperatures are closely related and the water temperatures have been widely used as the indicators of the environmental and ecological changes. It is highly necessary to estimate the frequency distribution of the air and water temperatures, for the climate change derives the change of the coastal water temperatures. In this study, the distribution function of the air temperatures is estimated by using the long-term coastal air temperature data sets in Korea. The candidate distribution function is the bi-modal distribution function used in the previous studies, such as Cho et al.(2003) on tidal elevation data and Jeong et al.(2013) on the coastal water temperature data. The parameters of the function are optimally estimated based on the least square method. It shows that the optimal parameters are highly correlated to the basic statistical informations, such as mean, standard deviation, and skewness coefficient. The RMS error of the parameter estimation using statistical information ranges is about 5 %. In addition, the bimodal distribution fits good to the overall frequency pattern of the air temperature. However, it can be regarded as the limitations that the distribution shows some mismatch with the rapid decreasing pattern in the high-temperature region and the some small peaks.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.99-106
• /
• 1998

The performance of the turbofan engine, a medium scale civil aircraft which has been developing in Rep. of Korea, was analyzed and the control scheme for optimization the performance was studied. The dynamic and real-time linear simulation was performed in the previous study The result was that the fuel scedule of the step increase overshoot the limit temperature(3105 $^{\cire}R$) of the high pressure turbine and got small surge margine of the high pressure compressor. Therefore a control scheme such as the LQR(Linear Quadratic Regulator) was applied to optimizing the performance in this studies. The linear model was expected for designing controller and the real time linear model was developed to be closed to nonlinear simulation results. The system matrices were derived from sampling operating points in the scheduled range and then the least square method was applied to the interpolation between these sampling points, where each element of matrices was a function of the rotor speed. The control variables were the fuel flow and the low pressure compressor bleed air. The controlled linear model eliminated the inlet temperature overshoot of the high pressure turbine and obtained maximum surge margins within 0.55. The SFC was stabilized in the range of 0.355 to 0.43.

• The Korean Journal of Franchise Management
• /
• v.13 no.2
• /
• pp.53-66
• /
• 2022

Purpose: How to build the attitude on brand is very important, because it affects the positive word of mouth and revisit intention. Brand attachment, brand name, and image congruence play important role on consumer behavior in terms of reinforcing consumers' perception of food service companies and differentiating them from competing brands. Following the planned behavior theory, this paper examines the effect of linking brand attitude to word-of-mouth and revisit intentions in the restaurant sector. Research design, data, and methodology: This paper examines the structural relationship among brand attachment, brand name, image congruence, brand attitude, WOM, and revisit intention. In order to test the purposes of this study, research model and hypotheses were developed. The questionnaire items were modified and used according to the content of this study based on previous studies. All constructs were measured by multiple items tested and developed in the previous research. The study is based on the quantitative method and considered 519 questionnaires fulfilled by customers of restaurants. The data were explored employing the partial least square-structural equation modelling (PLS-SEM). Frequency analysis was conducted to identify the general characteristics of the survey subjects. To measure the reliability and validity of the measurement tools, confirmatory factor analysis was conducted. Structural model analysis was conducted to verify the research model. Result: The findings demonstrate that brand attachment and brand name had positive effects on attitude while image congruence did not have. Also, attitude had positive effect on WOM and revisit intention. Conclusions: This study expands the literature about WOM and revisit intentions. This study expands prior research in a similar field to which the theory of planned behavior (TPB) is applied, and reveals that brand attachment, brand name, and brand image congruence play an important role in developing brand attitude that affect revisit intention and WOM. And provide guidelines on how to enhance competitiveness in the restaurant sector based on understanding of linking brand attitude to customer loyalty and repeat business. By putting into practice these suggestions in the restaurant industry, brands can easily build up their attitude and boost a positive WOM and the intention to revisit.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.113-136
• /
• 2023

Purpose - Global production chains and their impacts on economic growth have drawn extensive attention from researchers. Close relationships among global production chains, export and economic growth have been illuminated, as evidenced by the fast and stable economic growth of East Asian economies. These economies perform various roles within global production chains using offshoring, in which the impact of import on domestic gross output is as strong as that of export. The impact of import on economic growth would depend on whether imported inputs substitute or complement domestic inputs production, which is likely to vary according to individual countries' functions within global production chains. The economic growth of concerned countries would also be diverse. However, little attention has been paid to the impact brought by imports compared to its significance. Design/methodology - The principal methodology used in this paper is structural decomposition analysis (SDA), widely chosen to elucidate the impact of various factors on domestic gross output using input-output tables. This paper extracts trade data of six Asian economies from the World Input-Output Database (WIOD) 2016 release that covers 43 countries for the period 2000-2014. The extracted data is then categorised into 37 sectors. First, this paper calculates the Feenstra-Hanson Offshoring Index (OSI) of each country. It then applies SDA to measure the changes in each economy's gross output, export, import input coefficients, and domestic input coefficients. Finally, after taking the first difference from pooled time-series data, it estimates the correlations between imported input coefficients and OSI using the ordinary least square (OLS) method. Findings - The main findings of this paper can be summarised as follows. Firstly, all six countries have increasingly engaged in global production chains, as evidenced by the growing size of OSI. Secondly, there are negative correlations in five countries except Japan, with sectoral differences. Thirdly, changes in import input coefficients are not negative in all six countries, indicating that offshoring does not necessarily substitute for domestic inputs production but does complement it and, therefore, fosters their economic growth. This is observed in China, Indonesia, Korea and Taiwan. Offshoring has led to an increase in the use of imported inputs, which has, in turn, stimulated domestic inputs production in these countries. Originality/value - While existing studies focus on the role of export in evaluating the impact of participating global production chains, this paper explicitly examines the unexplored impact of import on domestic gross output by considering both the substitution and the complementary effect, using the WIOD. The findings of this paper suggest that Asian economies have achieved fast and stable economic growth not only through successful export management but also through effective import management within global production chains. This paper recommends that the Korean government and enterprises carefully choose offshoring strategies to minimise disruption to domestic production chains or foster them.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.40-47
• /
• 2009

This paper presents the method of measuring the feedback interference channel, which is developed between the transmit and receive antennas of a wireless repeater by receiving the transmit signal at the receive antenna of the identical repeater, and experiment results obtained by analyzing the measurements. This experiment uses 2 GHz WCDMA signal and is carried out near a highway. The high-speed mobiles on highways cause reflected signals with high Doppler frequencies and large energy. In order to characterize the feedback channel, the power delay profile and the scattering function are estimated by identifying the delay spread, the Doppler spread, the number of fingers, and the attenuation with delay. Since the feedback interference channel is constructed between the fixed TX and RX antennas, which is dependent upon the multipaths developed by moving or fixed objects around the antennas, the channel shows different properties comparing to the conventional channels between the base station and the mobile station. Therefore, the results presented in the paper are expected to provide guidelines for designing and evaluating wireless repeater systems.