• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.97-104
• /
• 2018

The finite difference software Flac3D is used to study the influence of tunnel burial depth, tunnel diameter and lateral pressure coefficient of original rock stress on the stress and deformation of tunnel surrounding rock under sandstone condition. The results show that the maximum shear stress, the radius of the plastic zone and the maximum displacement in the surrounding rock increase with the increase of the diameter of the tunnel. When the lateral pressure coefficient is 1, it is most favorable for surrounding rock and lining structure, with the increase or decrease of lateral pressure coefficient, the maximum principal stress, surrounding displacement and plastic zone range of surrounding rock and lining show a sharp increase trend, the plastic zone on the lining increases with the increase of buried depth.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.159-167
• /
• 1999

For exisiting $K_0$-oedometer, the lateral wall of the ring is cut thinly to make space and by filling the space with space with water or mercuty to keep the balance to the lateral pressure of a specimen, the pressure of the fluid is checked for the pressure of the specimen. But the devices to keep the balance to the lateral pressure of a specimen are complicated, difficult to manufacture and expensive. As newly developed $K_0$-oedometer is equipped with the load cell which can resist higher pressute than the lateral pressure of the specimen, there is nearly no deformation due to the lateral pressure of the specimen. And the measuting is cheap and easy as there are fewer accessories.

• Geomechanics and Engineering
• /
• 제31권2호
• /
• pp.209-222
• /
• 2022

Finite element analyses using coupled Eulerian-Lagrangian technique are performed to investigate the effect of soil conditions on plugging of open-ended piles in sands. Results from numerical simulations are compared against the data from field load tests on three open-ended piles and show very good agreement. A parametric study focusing on determination of the coefficient of lateral earth pressure (K) in soil plug after pile driving are then performed for various soil densities, end-bearing conditions, and layering conditions. Results from the parametric study suggest that the K value in the soil plug - and hence the degree of soil plugging - increases with increasing soil densities. The analysis results further show that the K value within the soil plug can reach about 63 to 71% of the coefficient of passive earth pressure after pile driving. For layered soil profiles, the greater K values are achieved after pile driving when the denser soil layer is present near the pile base regardless of number of soil layers. This study provides comprehensive numerical and experimental data that can be used to develop advanced theory for analysis and design of open-ended pipe piles, especially for estimation of inner shaft resistance after pile driving.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.357-364
• /
• 2004

A computational study on the supersonic flow around the lateral jet controlled missile has been performed. Case studies have been performed by comparing the normal force coefficient and the moment coefficient of a missile body for several different jet flow conditions, angle of attacks, circumferential jet locations, and spouting jet angles. For the several different jet flow conditions, which include the jet pressure, the jet Mach number, and the corresponding jet mass flow rate, the results show that the normal force coefficient is almost proportional to the jet thrust but the moment coefficient is not. Distinctly different flow phenomena can be noticed as the pressure ratio and the jet Mach number increase. By investigating the angle of attack effect to the normal force and the pitching moment, it has been identified that the normal force and the pitching moment show nonlinearity with respect to the angle of attack. From the detailed flow field analyses with respect to the jet flow conditions and the angle of attacks, it is verified that most of the normal force loss and the pitching moment generation are taken place at the low-pressure region behind the jet nozzle. Furthermore, the normal force and the pitching moment characteristics of the missile have been identified by comparing different circumferential jet locations and spouting jet angles.

• 터널과지하공간
• /
• 제26권3호
• /
• pp.192-200
• /
• 2016

대심도 지하 네트워크 구축을 위한 대심도 복층터널의 계획 시 세그먼트 라이닝의 거동을 주요 구조물인 중간슬래브와 측압계수(K)에 따라 검토하였다. 연구를 위하여 세그먼트 라이닝 해석법을 검토하였고, 대심도 복층터널에 적합한 해석 모델을 결정하였다. 또한 연직하중에 대해 검토하였고, 중간슬래브 하중은 슬래브 자중인 정하중과 차량에 의한 활하중을 고려하였다. 연구결과 중간슬래브 하중 적용에 따른 단면력은 터널 하부에 주로 발생하였고 휨모멘트의 크기에 가장 큰 영향을 미쳤다. 또한 휨모멘트 작용 방향의 변화가 큰 변수로 나타났고, 중간슬래브 하중 적용에 따른 단면력의 크기는 비교적 일정하여, 단면력의 발생이 가장 작은 측압계수 1.00에서 세그먼트 라이닝에 미치는 영향이 제일 크게 나타나는 것을 알 수 있었다. 본 연구의 결과로 복층터널의 슬라브와 측압계수(K)의 영향에 의한 세그먼트 라이닝의 거동을 파악하여 합리적이고 경제적인 복층터널 구조물 설계의 방향을 제시할 수 있을 것이다.

• 한국지반신소재학회논문집
• /
• 제14권2호
• /
• pp.23-33
• /
• 2015

개착식 터널공법으로 시공된 지하철 건설현장을 대상으로 각종 계측시스템을 적용하여 지하 박스구조물에 작용하는 토압을 측정하였다. 이를 토대로 기존 이론식으로 산정된 측방토압과 현장에서 계측된 실측토압을 비교 검토하고, 실제 지하구조물에 작용하는 토압분포를 조사하였다. 조사결과에 의하면 지하 박스구조물에 작용하는 연직토압은 주로 성토고에 큰 영향을 받고 있으며, 측방토압은 흙막이구조물(버팀보, 흙막이벽)의 존치여부에 큰 영향을 받는 것으로 나타났다. 현장에서 측정된 지하 박스구조물 상단에 작용하는 연직토압은 Bierbaumer의 이론토압에 가장 근사하게 나타나고 있으며, 측방토압은 정지토압보다 주동토압에 가깝게 작용하고 있다. 그리고, 토압계수는 토사층의 경우 평균 0.35정도로 나타났으며 연암층의 경우 평균 0.21정도로 토사층에서 크게 나타나고 있다. 따라서, 지하 박스구조물이 토사층에 설치되는 경우, 지하 박스구조물에 작용하는 측방토압은 정지토압보다는 주동토압과 정지토압의 평균치를, 암반층에 설치되는 경우에는 주동토압을 사용하는 것이 보다 합리적이라고 판단된다.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.643-654
• /
• 2018

Tunnel excavation leads to a disturbance on the initial stress balance of surrounding soils, which causes convergences around the tunnel and settlements at the ground surface. Considering the effective impact of settlements on the structures at the surface, it is necessary to estimate them, especially in urban areas. In the present study, ground settlements due to the excavation of East-West Line 7 of the Tehran Metro (EWL7) and the Abuzar tunnels are evaluated and the effect of the lateral earth pressure coefficient ($K_0$) on their extension is investigated. The excavation of the tunnels was performed by TBMs (Tunnel Boring Machines). The coefficient of lateral earth pressure ($K_0$) is one of the most important geotechnical parameters for tunnel design and is greatly influenced by the geological characteristics of the surrounding soil mass along the tunnel route. The real (in-situ) settlements of the ground surface were measured experimentally using leveling methods along the studied tunnels and the results were compared with evaluated settlements obtained from both semi-empirical and numerical methods (using the finite difference software FLAC3D). The comparisons permitted to show that the adopted numerical models can effectively be used to predict settlements induced by a tunnel excavation. Then a numerical parametric study was conducted to show the influence of the $K_0$ values on the ground settlements. Numerical investigations also showed that the shapes of settlement trough of the studied tunnels, in a transverse section, are not similar because of their different diameters and depths of the tunnels.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.55-65
• /
• 2002

소성흐름을 발생시키는 측방유동 가능지반내에 설치된 매설관에 작용하는 토압에 대한 메카니즘을 규명하기 위해 파괴형상실험을 실시하고, 파괴형상실험을 토대로 지반변형속도를 고려하기 위해 Maxwell 점탄성 모델을 적용한 토압산정식을 제안하였다. 직접전단실험으로 구한 점성계수와 내부마찰각과 상재압을 고정하여 이론식으로 도출해낸 점성계수가 잘 일치하고 있음을 확인하였고 모형실험결과와 이론식에 의한 토압은 지반변형속도에 영향을 받으며 비교적 일치하며 지반변형이 없는 경우에도 정지토압을 받음을 알 수 있다. 또한, 지반의 지지력은 점성토에서는 관입전단파괴시의 값과 거의 일치하였다. 또한, 매설관 주변지반의 파괴모드는 매설관직경과 무관하게 지반변형속도에 영향을 받으며 작용토압은 균질한 지층의 경우 선형적으로 증가하고 조립질에 가까울수록 선형적 감소치를 보이므로 매설관주변지반의 매립재를 이용하여 매설관주변의 토압을 경감시킬 수 있음을 알 수 있다.

• 한국터널지하공간학회 논문집
• /
• 제11권1호
• /
• pp.23-35
• /
• 2009

본 연구는 터널의 주 지보재인 숏리트의 휨응력을 측압계수 변화에 따라 파악하기 위해 수행되었다. 이를 위해 1차로 마제형인 도로터널과 유사한 크기의 터널모형을 제작하여 수행하였으며 실험 결과를 3차원 수치해석으로 검증하였다. 실험의 하중재하를 위해 다양한 하중조건의 모사가 가능하도록 개별조절이 가능한 가압실린더 11개를 사용하였다. 측압계수를 0.5, 1.0 및 2.0으로 하여 3번의 실험을 수행하였으며 각 실험에서 측정된 숏크리트 휨응력이 수치해석에서 계산된 휨응력과 비교 분석되었다. 결과 수치해석에서 얻은 휨압축응력은 실험과 유사한 길과를 보였지만, 휨인장응력은 수치해석시 약간 과대평가 되는 것을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제6권1호
• /
• pp.17-31
• /
• 2014

This paper investigates the development of failure surfaces induced by an embankment on soft marine clay deposits and the characteristics of such surfaces through numerical simulations and its comparative study with monitoring results. It is well known that the factor of safety of embankment slopes is closely related to the vertical loading, including the height of the embankment. That is, an increase in the embankment height reduces the factor of safety. However, few studies have examined the relationship between the lateral movement of soft soil beneath the embankment and the factor of safety. In addition, no study has investigated the distribution of the pore pressure coefficient B value along the failure surface. This paper conducts a continuum analysis using finite difference methods to characterize the development of failure surfaces during embankment construction on soft marine clay deposits. The results of the continuum analysis for failure surfaces, stress, displacement, and the factor of safety can be used for the management of embankment construction. In failure mechanism, it has been validated that a large shear displacement causes change of stress and pore pressure along the failure surface. In addition, the pore pressure coefficient B value decreases along the failure surface as the embankment height increases. This means that the rate of change in stress is higher than that in pore pressure.