• Structural Engineering and Mechanics
• /
• v.65 no.1
• /
• pp.43-51
• /
• 2018

Structural modal parameters i.e. natural frequencies, damping ratios and mode shapes are dynamic features obtained either by measuring the vibration responses of a structure or by means of finite elements models. Over the past two decades, modal parameters have been used to detect damage in structures by observing its variations over time. However, such variations can also be caused by environmental factors such as humidity, wind and, more importantly, temperature. In so doing, the use of modal parameters as damage indicators can be seriously compromised if these effects are not properly tackled. Many researchers around the world have found numerous methods to mitigate the influence of such environmental factors from modal parameters and many advanced damage indicators have been developed and proposed to improve the reliability of structural health monitoring. In this paper, several vibration tests are performed on a simply supported steel beam subjected to different damage scenarios and temperature conditions, aiming to describe the variation in modal parameters due to temperature changes. Moreover, four statistical methodologies are proposed to identify damage. Results show a slightly linear decrease in the modal parameters due to temperature increase, although it is not possible to establish an empirical equation to describe this tendency.

• Atmosphere
• /
• v.25 no.2
• /
• pp.193-203
• /
• 2015

A large aperture scintillometer (LAS) was deployed with an optical path length of 2.1 km to estimate turbulent sensible heat flux (${\mathcal{Q}}_H$) over a highly heterogeneous urban area. Scintillation measurements were conducted during cold season in November and December 2013, and the daytime data of 14 days were used in the analysis after quality control processes. The LAS-derived ${\mathcal{Q}}_H$ show reasonable temporal variation ranging $20{\sim}160W\;m^{-2}$ in unstable atmospheric conditions, and well compare with the measured net radiation. The LAS footprint analysis suggests that ${\mathcal{Q}}_H$ can be relatively high when the newly built-up urban area has high source contribution of the turbulent flux in the study area ('northwesterly winds'). Sensitivity tests show that the LAS-derived ${\mathcal{Q}}_H$ are highly sensitive to non-dimensional similarity function for temperature structure function parameter, but relatively less sensitive to surface aerodynamic parameters and meteorological variables (temperature and wind speed). A lower Bowen ratio also has a significant influence on the flux estimation. Overall uncertainty of the estimated daytime ${\mathcal{Q}}_H$ is expected within about 20% at an upper limit for the analysis data. It is also found that stable atmospheric conditions can be poorly determined when the scintillometry technique is applied over the highly heterogeneous urban area.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.77-85
• /
• 2009

Considering heat insulation and beautiful sight of construction, making use of exterior panels is increasing. Recently the exterior panels now are weak very much, and so in consequence of the weakness fire spreads rapidly. Compared with internal fire, external vertical fire spread rate goes rapidly and it is extensive in spread range, therefore it is dangerous very much. Accordingly, under present condition of poor standard of exterior panels, it is required to take measure to meet the appropriate situation. In this study, by making use of FDS(Fire Dynamic Simulation) program about external vertical fire of high rise building, fire behavior is searched by computer. It is important that realizing by computer fire modeling about external vertical fire must be included certainly in procedure of fire performance design in the future. In modeling program, FDS version 5 is available, and aluminium composite panel is applied in external panels. In this study, for realizing of actual fire condition, FDS is applied by details of fire scenarios considering influence of wind.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.330-340
• /
• 2009

A naval shipboard inevitably movies in a pitch and roll direction under the influence of wave and wind in the sea. As a result, the shipboard gets in a continuous turning motion back/front and right/left. And the shipboard is also constantly exposed to many different kinds of disturbance signals including the vibrations of various frequencies from the internal equipments and their vibrations, strong waves, and impact from explosion. This paper formulates multi-body dynamic models similar to an actual system and simulates the pitch/roll positions of a 2-axes gimbals with PI controller for consecutive behavior of a naval shipboard including disturbance.

• Journal of Preventive Medicine and Public Health
• /
• v.47 no.2
• /
• pp.124-128
• /
• 2014

Objectives: To evaluate the monthly variation in the airborne $(1{\rightarrow}3)-{\beta}$-D-glucan level throughout one year and its relationship with climatic factors (temperature, relative humidity, wind speed, hours of daylight, cloud cover, and pollen counts). Methods: A total of 106 samples were collected using a two-stage cyclone sampler at five outdoor sampling locations (on top of 5 university buildings). The kinetic limulus amebocyte lysate assay was used to obtain $(1{\rightarrow}3)-{\beta}$-D-glucan levels. Results: Airborne $(1{\rightarrow}3)-{\beta}$-D-glucan levels were significantly higher in the spring, particularly in April, and temperature was significantly related to $(1{\rightarrow}3)-{\beta}$-D-glucan levels (r=0.339, p<0.05). Conclusions: $(1{\rightarrow}3)-{\beta}$-D-glucan levels may be highest in the spring, and outdoor temperature may influence $(1{\rightarrow}3)-{\beta}$-D-glucan levels.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.1
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.296-300
• /
• 2003

The autopilot system targets decreasing labor, working environment improvement, service safety security and elevation of service efficiency. Ultimate purpose is minimizing number of crew for guarantee economical efficiency of shipping service. Recently, being achieving research about Course Keeping Control, Track Keeping Control, Roll-Rudder Stabilization. Dynamic Ship Positioning and Automatic Mooring Control etc. which compensate nonlinear characteristic using optimizing control technique. And application research is progressing using real ship on actual field. Relation of Rudder angle which adjusted by Steering Machine and ship-heading angle are non-linear. And Load Condition of ship as non-linear element that influence to Parameter of ship. Also, because the speed of a current and direction of waves, velocity and quantity of wind etc. that is disturbance act in non-linear from, become factor who make serv ice of shipping painfully. Therefore, service system of shipping requires robust control algorithm that can overcome nonlinearity. In this paper, Using fuzzy algorithm ,Design autopilot system of ship that could overcome the non-linear factor of ship and disturbance and examined result through simulation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.6
• /
• pp.52-62
• /
• 2006

The flora of vascular plants around Chunji and Sochunji in Mt. Baekdu was listed 120 taxa; 31 families, 81 genera, 97 species, 1 subspecies, 21 varieties and 1 form. About endangered wild plants, 2 taxa (Paeonia obovata, Rhododendron aureum) are in class II. 12 taxa were listed as rare and endangered plants; Disporum ovale, Lilium davuricum, Saxifraga punctata, Rosa marretii, Cnidium tachiroei, Bupleurum euphorbioides, Halenia corniculata, Gentiana jamesii, Pedicularis verticillata, etc. 10 taxa were listed as Korean endemic plants; Lilium amabile, Aconitum pseudolaeve var. erectum, Oxytropis anertii for. alba, Valeriana officinalis var. latifolia, Cardamine resedifolia var. morii, Homopteryx nakaiana, Saussurea alpicola, Ligularia jamesii, etc. Specific plants by floral region were total 47 taxa; 3 taxa (Paeonia obovata, Rhododendron aureum, Pedicularis verticillata) in class V, 15 taxa (Lycopodium annotinum, Alnus maximowiczii, Saxifraga punctata, Petasites saxatile, etc.) in class IV, 5 taxa (Spiraea salicifolia, Sanguisorba hakusanensis, Acer ukurunduense, Campanula glomerata var. dahurica, Cacalia adenostyloides) in class III, 18 taxa (Lycopodium chinense, Disporum ovale, Ceologlossum viride var. bracteatum, Betula ermani, Aruncus dioicus var. kamtschaticus, Filipendula multijuga, Geranium eriostemon, Cnidium tachiroei, Ligularia stenocephala, etc.) in class II, 6 taxa (Pinus koraiensis, Cimicifuga simplex, Sanguisorba tenuifolia var. alba, Senecio nemorensis, Cacalia hastata subsp. orientalis, Cirsium pendulum) in class I. Peculiar flora around Chunji is thought to be made by the environmental factors such as wind, temperature and rainfall that influence the plants' growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.658-663
• /
• 2008

In this study, we estimated the influence of electrical pole by FEM(Finite Element Method) and developed protective system by designing and interpreting protective system for electrical pole and overhead optical communication line when abnormal strength worked on messenger wire. Protective system did not shed messenger wire under wind pressure and discontent load but did assign a part to preventing rupture of electrical pole and disconnection of optical communication line through automatically shed messenger wire over fixed strength. Structure of protective system analysis by FEM and prove property by measuring tensile strength for practical product.

• Journal of the Korean earth science society
• /
• v.39 no.5
• /
• pp.419-435
• /
• 2018

The purpose of this study is to understand meteorological and climatological factors that have influence on the garlic product in Seosan and Taean, and to analyze the economic value according to the use of climatical information data for garlic farmers. The climatological characteristics and trends in this area are analyzed using the meteorological data at the Seosan local meteorological agency from 1984 to 2013, the national statistical data for the product of garlic from 1989 to 2013, and the scenario data for climate change (RCP 4.5 and 8.5) for the period from 2001 to 2100. The results are as follows. First, the condition of lower temperature for garlic growth in winter season is satisfied with the mean air temperature. The wind speed are lower and stronger in Seosan and Taean than other garlic area. The suitable condition for the growth of northern type of garlic shows the decreasing trend in the accumulated precipitation in May. However, the area of growing the northern type garlic in the future is likely diminished because mean air temperature, accumulated precipitation, and mean wind speed are strong in the harvest time of garlic. Second, the seedtime of the northern and southern type of garlic using climate change scenarios (RCP 4.5, 8.5) in Seosan and Taean is getting late as time passes. and the harvest time gets faster, which indicates s that the period of garlic cultivation becomes shorter from 50 days to around 90 in the next 100 years. Third, the beginning days of white rot and delia platura of garlic are estimated by applying to the meteorological algorithm using mean air temperature and soil humidity. Especially, the beginning day of white rot garlic is shown to be faster according to the scenarios of RCP 4.5 and RCP 8.5. Fourth, the product of garlic (kg/10a) shows a high correlation with the minimum air temperature of a wintering time, the mean wind speed of a wintering time, the accumulated precipitation of a corpulent time, and the mean relative humidity of corpulent time of garlic. On the other hand, the analysis of garlic product when using the meteorological information data in cultivating garlic in Seosan and Taean reveals that the economic value increases up to 9% in total.