• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.309-320
• /
• 2012

Dynamic behaviors of the tunnel linings of curved tunnels with various curvatures are investigated to examine the effect of wind loads due to passing vehicles. In the case without backfill, the responses of the tunnel lining should be considered to examine the clearance of the lining. A steel tunnel lining is selected to see the influence of the wind load upon the tunnel lining more clearly. The wind pressure upon the lining is simplified into the pressure and suction while the vehicle passing the loading positions. As the radius of curvature decreases, the response decreases, showing that the strength against the deformation is found to increase since the asymmetry of the deformation shape is reduced. It is found that the responses increase as the passing vehicle speed increases.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.164-176
• /
• 2003

During summer, the DIN (dissolved inorganic nitrogen) and DIP (dissolved inorganic phosphate) observed in the Jindong Bay in the southern sea of Korea show much higher values in the inner area of the bay. In general, they have high values in the upper (0-1 m) and lower layers (8 m-bottom), but are relatively lower in the middle layer (1-8 m). These features in their distribution are examined using an ecosystem model with considering the wind, tidal current, horizontal gradient of water density and residual flow. The experiments were focused on how to influence nutrients associated with these conditions. In the experiment with tide-induced residual flow, the values of nutrients appeared lower than the observation, and were well corresponded to it when the effects of wind, tide-induced residual current and horizontal gradient of water density were additionally imposed. A statistical analysis identifies these results. This paper suggests that variation of nutrient in the Jindong Bay during summer should be seriously a(footed wind-driven current by the wind and density-driven current is induced by the horizontal gradient of water density as well as tidal current.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1331-1337
• /
• 2013

This study deals with the structural optimization of hybrid vertical-axis wind turbine blades using a response surface method (RSM). The structural analysis results suggest that the stress of hybrid vertical-axis wind turbine blades exceeds the yield strength. Optimization techniques are then applied to structural design to ensure a safe structure. First, the design factors that strongly influence the structural response are identified. The RSM was applied based on the design of experiments. The objective function and constraint terms set the weight and allowable stress, respectively. Furthermore, sensitivity analysis was conducted to indicate the effects of the design factors on the stress and weight. Finally, structural design was performed for the hybrid vertical-axis wind turbine blade.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.93-100
• /
• 2008

A multi-nesting grid storm surge model, Korea Ocean Research and Development Institute-Storm surge model, was calibrated to simulate storm surges. To check the performance of this storm surge model, a series of numerical experiments were explored including tidal calibration, the influence of the open boundary condition, the grid resolutions, and typhoon paths on the surge heights using the typhoon Maemi, which caused a severe coastal disasters in Sep. 2003. In this study the meteorological input data such as atmospheric pressure and wind fields were calculated using CE wind model. Total 11 tidal gauge station records with 1-minute interval data were compared with the model results and the storm surge heights were successfully simulated. The numerical experiments emphasized the importance of meteorological input and fine-mesh grid systems on the precise storm surge prediction. This storm surge model could be used as an operational storm surge prediction system after more intensive verification.

• Journal of Environmental Impact Assessment
• /
• v.16 no.5
• /
• pp.351-361
• /
• 2007

To evaluate dominant synoptic classes which affect on $PM_{10}$ concentration in Seoul, 64 synoptic classes are classified from four seasons, 850hPa geopotential wind and lower level stability Index. In this study, we used air monitoring and meteorological data in Seoul for five years from 2001 to 2005. The results indicate that the highest occurrence frequency of synoptic class is under a strong westerly geopotential wind and stable lower atmosphere in spring. The highest $PM_{10}$ concentration of synoptic class is associated with a weak geopotential wind speed and high lower level stability. In that class, not only $PM_{10}$ but $SO_2$, $NO_2$ and CO concentrations are also higher than other classes. The analysis of spacial distribution of $PM_{10}$ concentration in each class are indicate that the influence of synoptic class are similar in the Metropolitan area in Korea. But $PM_{10}$ concentration in some areas in Kyoung-Gi are more higher than in Seoul. The relationship between $PM_{10}$ concentration and Meteorological indicator (relative humidity, temperature, surface wind speed) under same synoptic class is more correlative in Winter than other season.

• Journal of the korean society of oceanography
• /
• v.31 no.4
• /
• pp.183-195
• /
• 1996

A barotropic non-linear numerical model is used to study the response of the Yellow Sea to winter cyclone passage. Cyclones normally come from the outside of the western boundary, China, and pass the region eastward. The cyclone parameters used for the present study are the following: the intensity, i.e., the maximum wind speed of the cyclone; the effective radius corresponding to this maximum; and the translation speed. The equations of motion are integrated over the depth which is supposed to be a constant. The Gaussian function is used to define the stream function of the wind. The following results have been found. A northward current is generated by the frontal part of the cyclone near the western boundary. After the cyclone leaves the sea area, a southward current is generated by the rear part of the cyclone. After that, a northward current is generated once again due to the westward propagating Rossby waves. The response of the sea to the cyclone passage is strongly influenced by a steady current when the steady current and the current due to the cyclone wind are of the same order. The steady current diminishes the sea response and reduces the speed of the southward current, and enhances the northward current speed. The intensity and the translation speed of a cyclone also influence the flow pattern significantly.

• Journal of Environmental Science International
• /
• v.21 no.4
• /
• pp.461-470
• /
• 2012

Agriculture is more influenced by environmental factors rather than other industries. Among the environmental factors, the meteorological conditions mainly impact the output of agricultural products. Hence, the purpose of this study is to analyze the impact of meteorological factors on the output of elemental agricultural products. As a first step, we obtained the data of the meteorological factors (i.e., precipitation, humidity, temperature, insolation, snowdrifts, wind velocity) and the output of the various agricultural products (i.e., grain, fruits and vegetables, root crops, green vegetables, seasoned vegetables, fruits, special crops) from the year 1990 to 2009 (20 years) of Seoul and the six metropolitan cities in Korea. Then, the analysis of the correlation between the agricultural product with the largest output and the meteorological factors of the place where the corresponding agricultural product is most produced, was carried out in order to determine the core meteorological factor that most impacts the output of agricultural product. The correlation analysis revealed that humidity, insolation and wind velocity have been the crucial meteorological factors to influence the output of the agricultural products. From the result, we can induce that the meteorological forecast information about the vital meteorological factors, i.e., humidity, insolation and wind velocity, facilitates the optimized cultivation plan to maximize the output of agricultural products.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.407-421
• /
• 2022

Prefabricated hybrid wind turbine towers (WTTs) are promising due to height increase. This study proposes the use of ultra-high performance concrete (UHPC) to develop a new type of WTT without the need to use reinforcement. It is demonstrated that the UHPC WTT structure without reinforcing bars could achieve performance similar to that of reinforced concrete WTTs. To simplify the design of WTT, a design approach for the calculation of stresses at the horizontal joints of a WTT is proposed. The stress distribution near the region of the horizontal joint of the WTT structure under normal operating conditions and different load actions is studied using the proposed approach, which is validated by the finite element method. A further parametric study shows that the degree of prestressing and the bending moment both significantly affect the principal stress. The shear-to-torsion ratio also shows a significant influence on the principal tensile stress.

• Wind and Structures
• /
• v.37 no.4
• /
• pp.275-287
• /
• 2023

Subgrade differential settlement of high-speed railways was a pivotal issue that could increase the risk of trains operation. The risk will be further increased when trains in the subsidence zone are affected by crosswinds. In this paper, the computational fluid dynamics (CFD) model and finite element (FE) model were established, and the data transmission interface of the two models was established by fluid-solid interaction (FSI) method to form a systematic crosswind-train-track-subgrade dynamic model. The risk of high-speed train encountering crosswind in settlement area was analyzed. The results showed that the aerodynamic force of the trains increased significantly with the increase in crosswind speed. The aerodynamic force of the trains could reach 125.14 kN, significantly increasing the risk of derailment and overturning. Considering the influence of crosswind, the risk of train operation could be greatly increased. The safety indices and the wheel-rail force both increased with the increase of the wind speed. For the high-speed train running at 350 km/h, the warning value of wind speed was 10.2 m /s under the condition of subgrade settlement with wavelength of 20 m and amplitude of 15 mm.

• Journal of ILASS-Korea
• /
• v.19 no.3
• /
• pp.136-141
• /
• 2014

This study reports numerically the characteristics of dust scattering around the coal storage pile yards, substantially affected by the windbreak wall height. The dust scattering is closely associated with the frictional effect of wind flows as well as the pressure variation that consequently affect the dust particle behavior. In the present study, with the use of the commercial code of FLUENT, the distribution of wind velocity and pressure are predicted around coal storage pile yard for four different heights of the wind break wall. From the results, it was found that for the case 1 with the outer windbreak wall height of 3 m and inner windbreak wall height of 6 m, the amount of scattering dust for a year was estimated to be 1451 kg, whereas for the case 4 where a height of outer windbreak wall is 10 m and a height of inner windbreak wall is 16 m, the amount of scattering dust for a year was 358 kg. It shows that the dust scattering can be reduced by 75%, indicating important role of windbreak wall height on particle scattering. The numerical results would be useful in decision of the appropriate height of windbreak wall for decreasing the amount of scattering dust under various environmental conditions.