• Journal of Veterinary Clinics
• /
• v.26 no.3
• /
• pp.226-230
• /
• 2009

We evaluated the efficacy of $\beta$-hemolytic Streptococcus(S.) iniae vaccine on cultured olive flounder. Three hundred flounders(weight $50{\pm}5$ g) were obtained from two farm at Wando and Taean in the southern and western coast of Korea at May and June 2007, respectively. Twenty of flounders moved in 0.5 tons aquaria in land-marine tank system of National Veterinary Research and Quarantine Service. Seawater was transported from the sea of Inchon in western Korea, and water temperature maintained to $22^{\circ}C$ and $25^{\circ}C$ during the vaccination and challenge test, respectively. We used the formalin-inactivated $\beta$-hemolytic S. iniae vaccine produced by domestic manufacturers. The vaccine was intraperitoneally administered to fish. The vaccinated and control group were challenged with intraperitoneal injection by virulent S. iniae SI-36 isolates with $5.0{\times}10^8$ CFU/fish at 3 weeks after vaccination. We evaluated the vaccine efficacy by calculating numbers of dead fish, and observing of clinical signs, exterior and gross lesions, and examining bacteria isolation and identification. Thirty-four(25.2%) of 135 control and vaccinated group fish were dead with serious anemia, abdominal extension, and hernia of intestine during 3 weeks post vaccination. We isolated Neoheterobothrium hirame from the buccal cavity and Edwardsiella tarda from kidney of dead and diseased fish. When infected fish with these agents were challenged with S. iniae SI-36 isolates, the cumulative mortality of control and vaccinated group were 86.7, and 46.7%, respectively. However, significant differences(p<0.05) were observed on cumulative mortality between control(20.0%) and vaccinated group(95.0%) at second trials with 40 healthy, and relative percent survival(RPS) was 78.0%. We confirmed that the efficacy of $\beta$-hemolytic S. iniae vaccine on olive flounder were impacted by health condition such as bacterial and parasitic diseases.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.335-341
• /
• 2020

As life, once immersed in labor, changes with values and lifestyles, individuals consume or participate in culture and arts for learning, meeting of intellectual needs, pleasure, and exchange. As culture and art spaces have increased in recent times, these spaces have been transformed into places to create, view and exchange culture and art, and to consume cultural goods. Culture and art spaces have created and developed new genres and technologies that give viewers the opportunity to communicate and participate, allowing them to understand and accumulate works of media. A media façade thus gives a preference to places for visitors by giving an impression over a short period of time in culture and art spaces that are not areas for exhibitions and performances, and providing an opportunity to more easily approach and understand works and culture and art spaces. A media façade is a type of medium that imparts aesthetics and information by installing LED lighting on the exterior wall of a building for the realization of media functions. In order to analyze the effect of the media façade on preferences for culture and art spaces, a research model was established with media façade characteristics as independent variables and preferences for culture and art spaces as dependent variables. As a result, media façade design and media features influenced satisfaction, while the media characteristics of the media façade influenced recommendation and revisiting, suggesting that many changes will take place in culture and art spaces.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.18-24
• /
• 2020

The purpose of this study is to validate thermal hinderance effects, i.e., feasibilities, of fire-proof structure for LPG tank exposed to fire from adjacent burning building. The panel materials suggested for the fire-proof structure are (1) 10 mm-thick wood, (2) wood with fireproof coating, (3) 75 mm-thick Expanded Polystyrene, (4) 75 mm-thick glass wool filled sandwich panel, and (5) 75 mm-thick autoclaved lightweight concrete. The square planar fire source of 1 ㎡, a matrix of nozzles releasing 120-140 g/s of LPG, is used to heat up the wall and the tank beyond, mimicking heat transfer from burning exterior wall finishes. The feasibility is tested by inspecting structural integrity after test, and then by examining temperatures at both sides of panels and tank's front surface as well as heat fluxes. As a result, it can be concluded that, among the suggested sample materials, fire-proof wall with ALC panel only showed the feasibility for explosion prevention with the proven evidences of structural integrity and least increase in temperature of tank.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.65-72
• /
• 2016

Service life evaluation for RC Structures exposed to chloride attack is very important, however the previous two methods(deterministic and probabilistic method) show a big difference. The paper presents a service life simulation using deterministic and probabilistic method with time-dependent diffusion coefficient. Three different cases are considered for diffusion coefficient, concrete cover depth, and surface chloride content respectively, and then the PDF(probability of durability failure) and the related service life are obtained. Through adopting time-dependent diffusion, the discrepancy between the two methods can be reduced, which yields reasonable service life. When diffusion coefficient increases from $2.5{\times}10^{-12}m^2/sec$ to $7.5{\times}10^{-12}m^2/sec$, the service life decreases to 25.5~35.6% level, and cover depth does from 75 mm to 125 mm, it increases to 267~311% level as well. In the case of surface chloride content from $5.0kg/m^3$ to $15.0kg/m^3$, it changes to 40.9~54.5%. The effect of cover depth is higher than the others by 8~10 times and also implies it is a key parameter to service life extension.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2012

Recently, the government has been working feverously to save energy and reduce greenhouse gas emission by enacting Basic Act on Low Carbon Green Growth at the national level. Improving the insulation performance of building exterior and insulator can reduce the energy in the building sector. This study is about developing light-weight foamed concrete insulation panel that can be applied to buildings to save energy and to find the optimal condition for the development of insulation materials that can save energy by enhancing its physical, kinetic and thermal characteristics. Various experimental factors and conditions were considered in the study such as foam agent types (AES=Alcohol Ethoxy Sulfate, AOS=Alpha-Olefin Sulfonate, VS=Vegetable Soap, FP=Fe-Protein), foam agent dilution concentration (1, 3, 5%), and foam percentage (30, 50, 70%). Experiment results indicated that the surface tension of aqueous solution including foam agent, was lower when AOS was used over other foam agents. FP produced relatively stable foams in 3% or more, which produced unstable foams containing high water content and low surface tension when diluted at low concentration. Depending on foam agent types, compressive strength and thermal conductivity were similar at low density range but showed some differences at high concentration range. In addition, when concentrations of foam agent and foaming ratio increased, pore size increased and open pores are formed. In all types of foam agent, thermal conductivity were excellent, satisfying KS standards. The most outstanding performance for insulation panel was obtained when FP 3% was used.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.4
• /
• pp.374-380
• /
• 2006

For the improvement of Gulbi processing, yellow corvenia was salted by 2 different time (5 hours, low salted and 5 days, high salted) and then dried in the sun and stored for 5 and 21 days, respectively. Malonaldehyde contents and fatty acid composition were analyzed during Gulbi processing. The moisture contents of yellow corvenia were significantly decreased during processing procedure. The salt contents were 10 folds higher in 5 day-salted sample than in 5 hour-salted one. The salt contents showed reversed tendency to moisture contents. There was little change in pH during storage. The contents of malonaldehyde in yellow corvenia were increased during Gulbi processing and storage. Its contents were higher in 5 day-salted sample and exterior parts than 5 hour-salted sample and interior parts of Gulbi. The fatty acids composition showed higher oleic acid $(C_{18:1})$, palmitic acid $(C_{16:0})$ and docosahexaenoic acid $(C_{22:6})$ than any other fatty acids in Gulbi. Saturated fatty acids were increased but unsaturated fatty acids were decreased during Gulbi processing. After 21 days storage, unsaturated fatty acids remaining ratio in 5 hour-and 5 day-salted sample were 1.39 and 0.99 respectively. The contents of unsaturated fatty acids were dramatically changed as salt concentration increased during storage than in processing.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.382-390
• /
• 2016

This study has investigated the status and overview of design characteristics of customized shoes, which receives much recognition at domestic and overseas markets. Based on the market research on current consumer lifestyle and needs of the custom-shoes(which is an abbreviation of customized shoes), this study has provided its development directions, views and demands. The design types of custom-shoes have been broadly divide into two: firstly 'style centered custom-shoes'; secondly 'function centered custom-shoes'. Style centered custom-shoes are specifically divided into 3 types; first, formal custom-shoes; second, sports and casual custom-shoes; and lastly, bespoke shoes. Function centered custom-shoes design refers to enhancing the function of personal soleprint which has to be designed by delicately detailed insole and outsole, rather than alignment of exterior parts of the shoes. These are used in professional sports shoes and also include orthopedics footwear and grafted footwear for people who have disabled on foot. Custom footwear market has been highly expanded and has entered value-added market according to increasing interest in foot health and shopping trends on shoes buying like taking shoes as personal expression in accordance with a variety of places and situations. In the near future, custom-shoes can be produced in a couple of days due to the technological advance of 3D scanners and 3D printers. This phenomenon will wants more demands of specific shoes experts such as custom-design consultants or shoes fitting experts, who can overcome limitations of online custom-shoes stores.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.113-119
• /
• 2010

Fire resistance and field tests for high-strength concrete(HSC) of 80MPa were carried out to evaluate whether or not it shows the same material properties even in the field condition of being mass-produced and supplied. As a result, it was found that fire resistant HSCs containing composite fiber(NY, PP) of 0.075% have great resistance to fire and spalling. In the field test, before the pumping air contents, slump flow, U-box, L-flow, compressive strength, gap of hydration temperature of interior and exterior of specimen and placing ratio per hour satisfied the required properties of HSC. However, after the pumping of HSC, as slump flow and L-flow were slightly less than required criterion, they need to be improved. In terms of hydration temperature of HSC, it was found to satisfy the related criterion. Packing ability as well as placing ratio per hour of HSC, which was about $44m^3$, show outstanding results. If slump flow of developed ternary HSC is improved after the pumping it can be useful for the construction of high-rise buildings.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1379-1385
• /
• 2018

Glycans are attached to proteins as in glycoproteins and proteoglycans. They are found on the exterior surface of cells. O- and N-linked glycans are very common in eukaryotic cells but may also be found in prokaryotes. The interaction of cell surface glycans with complementary glycan binding proteins located on neighboring cells, other cell types, pathogens like virus, or bacteria is crucial in biologically and biomedically important processes like pathogen recognition, cell migration, cell-cell adhesion, development, and infection. Their implication in pathological condition, suggests an important role for glycans as disease markers. In addition, a great amount of research has been shown that appropriate glycosylation of a recombinant therapeutic protein is critical for product solubility, stability, pharmacokinetics and pharmacodynamics, bioactivity, and safety. Besides, cancer-associated glycosylation changes often involve sialic acid in glycan branch which play important roles in cell-cell interaction, recognition and immunological response. This review aims at giving a comprehensive overview of the glycan's biological function and describing the relevance among the glycosylation, disease diagnosis and treatment methods. Furthermore, the high-throughput analytic methods available to measure the profile changing patterns of glycan in the blood serum as well as possible underlying biochemical mechanisms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.281-290
• /
• 2022

In Korea, the number of national facilities for which a safety inspection is mandatory is increasing, and a safer safety inspection method is needed. This study aimed to increase the efficiency of the bridge safety inspection by enabling rapid exterior inspection while securing the safety of inspectors by using drones to perform the safety inspections of bridges, which had mainly relied on visual inspections. For the research, the Youngjong Grand Bridge in Incheon was selected as a test bed and was divided into four parts: the warren truss, suspension bridge main cable, main tower, and pier. It was possible to establish a five-step standard procedure for drone safety inspections. The step-by-step contents of the standard procedure obtained as a result of this research are: Step 1, facility information collection and analysis, Step 2, analysis of vulnerable parts and drone flight planning, Step 3, drone photography and data processing, Step 4, condition evaluation by external inspection, Step 5, building of external inspection diagram and database. Therefore, if the safety inspections of civil engineering facilities including bridges are performed according to this standard procedure, it is expected that these inspection can be carried out more systematically and efficiently.