• Journal of Wetlands Research
• /
• v.14 no.1
• /
• pp.101-120
• /
• 2012

We investigated the ecological characteristics of Jilmoe-neup conservation area which is one of wetlands designated as a Ramsar convention site in Mt. Odae from 2007 to 2011. Average out-flow of water was 0.80 $m^3/min$ during observation period. Average pH of water was 6.1, electric conductivity was 19 ${\mu}S/cm$ and contents of potassium, calcium and ammonium, nitrate and available phosphorus in water were recorded below average 2.0 mg/L. Peat layer was less developed than in other montane wetlands such as Yong-neup and Wangdeungjae-neup. Plants were recorded as 49 family, 118 genus, 163 species, 3 subspecies, 29 variety and 6 forma, total 163 taxa. Trientalis europaea L., which was designated in endangered level 2 by Ministry of Environment, inhabited at Sphagnum dominated area and Carex tussocks. Vegetation analysis showed that dominance value was changed as species distribution area were increased or decreased periodically. Although Jilmoe-neup deserved conservation value for Sphagnum fen which has diverse flora, it was affected from various factors such as ranch in the vicinity. Therefore, it must be monitored and managed continuously.

• Journal of Korea Water Resources Association
• /
• v.49 no.2
• /
• pp.83-94
• /
• 2016

Geomorphological, bed material and hydraulic characteristics are basis informations for the planning, design and management of the river in the aspect of flood control and environmental conservation, and it is very important to use these informations for the design of stable channel. In this study, dominant discharge was selected, geomorphological and hydraulic characteristics were analyzed using that discharge and also the characteristics of bed materials distribution were analyzed and bed materials-flow resistance relationship was evaluated, for the upstream section of Namgang dam. The dominant discharge was estimated a return period of approximately 1.5 year and stream type were classified Segment 1 and Segment 2 in this stream. Also, the frequency of riffle-pool showed 4.4 because this study area has the characteristics of natural channel that have not channel-crossing structures. In dominant discharge, according to the results that analyzed relationship between $h/d_{50}$ and $V/u_*$ to calculate flow resistance by bed materials, Julian's formula showed to appropriate in channel where is relatively close to natural river and is predominantly consisted of gravel, cobble, boulder and rock in mountain, and it was confirmed that the image processing methodology will be easily applied to the analysis of bed materials distribution in future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.6
• /
• pp.323-330
• /
• 1988

The spatial distribution of sea water temperature variation pattern in the South-eastern coastal region of Korea was studied by empirical orthogonal function (E. O. F) analysis in several depths from surface to 300m using the monthly mean water temperature averaged for 23 years, water mass analysis by T. S diagram and sectional diagram of water temperature. Typical type of water temperature variation in this area can be divided into surface (0m-50m), subsurface (100m-150m) and intermediate (200m-300m) layer. The first mode value of water temperature change on the surface layer showed $99\%$ of total variation, and decreased with the increase of the depth. It is deduced to be in the range of $60-70\%$ on the 300m layer. The representative type of water temperature fluctuation by the first mode in each layer is as follows. Water temperature change in the surface layer showed a seasonal variation. In the subsurface layer, it is governed by the interaction of the Tsushima Warm Current water with the cold water and by the heat transfer process from the upper layer. In the intermediate layer, water temperature variation seems to be governed by the advection of the bottom cold water.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.531-536
• /
• 2024

Control drones, which are recently classified as smart agricultural machines in the agricultural field, are striving to build smart control and automatic control systems by combining hardware and software in order to shorten working hours and increase the effectiveness of control in the aging era of rural areas. In this paper, the characteristics of the nozzle dedicated to the control drone were analyzed as a basic study for the establishment of management control and automatic control systems. In order to consider various variables such as the type of various drone models, controller, wind, flight speed, flight altitude, weather conditions, and UAV pesticide types, related studies are needed to be able to present the drug spraying criteria in consideration of the characteristics and versatility of the nozzle. Therefore, to enable the consideration of various variables, flow analysis (CFD) simulation was conducted based on the self-designed nozzle, and the theoretical and experimental values of the droplet distribution were compared and analyzed through water reduction experiments. In the future, we intend to calculate accurate scattering in consideration of various variables according to drone operation and use it in management control and automatic control systems.

• Journal of Korea Water Resources Association
• /
• v.49 no.5
• /
• pp.439-450
• /
• 2016

For the design of infrastructures controlling the flood events at ungauged basins, this study tries to find the regional flood frequencies using peak flow data generated by the spatial extension of flood records. The Chungju Dam watershed is selected to validate the possibility of regional flood frequency analysis using the spatially extended flood data. Firstly, based on the index flood method, the flood event data from the spatial extension method is evaluated for 22 mid/smaller sub-basins at the Chungju Dam watershed. The homogeneity of the Chungju dam watershed was assessed in terms of the different size of watershed conditions such as accumulated and individual sub-basins. Based on the result of homogeneity analysis, this watershed is heterogeneous with respect to individual sub-basins because of the heterogeneity of rainfall distribution. To decide the regional probability distribution, goodness-of fit measure and weighted moving averages method from flood frequency analysis were adopted. Finally, GEV distribution was selected as a representative distribution and regional quantile were estimated. This research is one step further method to estimate regional flood frequency for ungauged basins.

• Journal of Korea Water Resources Association
• /
• v.43 no.11
• /
• pp.995-1009
• /
• 2010

Accelerated soil erosion due to extreme climate change, such as increased rainfall intensity, and human-induced environmental changes, is a widely recognized problem. Existing soil erosion models are generally based on the gross erosion concept to compute annual upland soil loss in tons per acre per year. However, such models are not suitable for event-based simulations of erosion and deposition in time and space. Recent advances in computer geographic information system (GIS) technologies have allowed hydrologists to develop physically based models, and the trend in erosion prediction is towards process-based models, instead of conceptually lumped models. This study aims to propose an effective and robust distributed rainfall-sediment yield-runoff model consisting of basic element modules: a rainfall-runoff module based on the kinematic wave method for subsurface and surface flow, and a runoff-sediment yield-runoff model based on the unit stream power method. The model was tested on the Cheoncheon catchment, upstream of the Yongdam dam using hydrological data for three extreme flood events due to typhoons. The model provided acceptable simulation results with respect to both discharge and sediment discharge even though the simulated sedigraphs were underestimated, compared to observations. The spatial distribution of erosion and deposition demonstrated that eroded sediment loads were deposited in the cells along the channel network, which have a short overland flow length and a gentle local slope while the erosion rate increased as rainfall became larger. Additionally, spatially heterogeneous rainfall intensity, dependant on Thiessen polygons, led to spatially-distinct erosion and deposition patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.74-79
• /
• 2021

This study examined the mixing efficiency of exhaust gas and urea according to the mixer shape in the SCR system. For the experiment, an SCR simulation system was manufactured, and a uniformity detector was attached to the catalyst location to measure the uniformity. The experiment was conducted by setting the exhaust-gas flow rate, temperature, mixer type, and catalyst distance as variables. The experimental results confirmed the swirl angle analysis, urea number distribution, and uniformity. The swirl angle experiment of Models A and B confirmed that the swirl angle of Model A was formed approximately 7 to 8 degrees higher over the entire RPM range. When there was no mixer in the SCR system, the urea and water were concentrated to one side. Mixer Model A showed an even distribution overall, and Model B showed a slightly concentrated tendency at the beginning but then showed a stable distribution of urea. The mixing efficiency of 90%, which was the uniformity target, could be satisfied in Model A and Model B. In particular, Model A showed excellent results that satisfied 90% efficiency at 10 cm of the catalyst position.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Journal of the korean society of oceanography
• /
• v.31 no.2
• /
• pp.55-63
• /
• 1996

Distribution of suspended particulate matter, dissolved oxygen and major inorganic nutrients along a meridional section ($126^{\circ}$ 33' E) in the Cheju Strait is described along with the hydrographic and current data obtained during April 25-27, 1995. The current measurements was conducted using a vessel-mounted Acoustic Doppler Current Profiler (ADCP). Repeated coverage along an ADCP transect during 25 hours allows to calculate the daily mean along- and cross-strait currents. Measured material concentrations and the mean current speed were used to estimate the flux density (cencentration times current speed) of materials. Two types of depth distibution of flux densities were observed. for nitrate and suspended particulate matter, the depth distribution pattern of materials determines those of flux densities. However, flow patterns determine those of flux densities for dissolved oxygen, phosphate and silicic acid. The total along-strait water volume transport is about 0.3 Sv (1Sv $10^{6}$ $m^{3}/s^{-1}$). The total along-strait material transports are estimated to be 3.1 $${\times} $10^{5}$ $g/s^{-1},$ 2.4 ${\times}$ $10^{6}\;g/s^{-1},$ 7.I ${\times}$ $10^{2}\;mol/s^{-1},$ 3.I ${\times}$ $10\;mol/s^{-1},$ 1.7 ${\times}$ $10^{3}\;mol/s^{-1}$ for suspended particulate matter, dissolved oxygen, nitrate ion, silicic acid and phosphate ion, respectively.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.292-298
• /
• 2014

Purple ammannia (Ammannia coccinea Rottb.) is an exotic weed originated from North America. It was known to be a noxious weed in a rice paddy field for the competition with rice. We investigated its distribution and habitat types in Korea to obtain basic data for the management plan of this species. Although purple ammannia is currently not a dominant species in natural habitats, its nationwide distribution was found in our study. We categorized the types of its habitats as margins of rice paddies, abandoned paddy fields, riverine wetlands and reservoirs. Particularly, purple ammannia plants were frequently located along banks of irrigation channels that ran through rice paddies and surrounding wetlands. Because they mainly occurred along the direction of water flow, we considered that the plants have spread along water courses. A total of 69 vascular plant taxa was identified at the habitats of purple ammannia. The largest group of life form among purple ammannia population was therophytes, which indicates that purple ammannia mostly grow in the disturbed habitats.