• Journal of Korea Water Resources Association
• /
• v.37 no.6
• /
• pp.509-515
• /
• 2004

In this study, comprehensive evaluation on the fully coupled SWAT-MODFLOW model is performed. Since combined model can consider the spatially varied daily recharge rate, groundwater modeling would be greatly enhanced. Also, combined model has been able to generate the distribution of groundwater heads with time, surface-subsurface flow modeling would be greatly advanced. River-aquifer interaction is well established in the combined model considering two-way interactions. Consequently, the reliability of groundwater discharge and total runoff of watershed would be greatly enhanced when combined model is used.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.576-582
• /
• 1996

This work studies qualitative thermal characteristics of PCM cold storage medium container and its surrounding streams. Experimental parameters are initial PCM temperature and cold water flow rate. A mathematical modeling was establised to estimate temperature distribution and the cooling process. We found that the phase-change temperatures of PCM varies from 6 to $8^{\circ}C$ which is constant for other materials and that the dominant heat transfer resistance is that on the container side taking about 3/4 of the total resistance. The one dimensional mathematical model predicts experimental data quit well.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.105-110
• /
• 2006

Among many other alternative energy resources, small scale hydro power has been brought into attention as a reliable source of energy today, which had been relatively neglected since 1960s. Especially, Kaplan micro-turbine can be applied to various kind of small hydro power plants, such as reservoirs for agriculture purpose, sewage treatment plants and water purification plants. However present low head of Kaplan micro-turbines and small scale hydro turbines, have limitations in the minimum required head and flow rate for efficient operation. This research is to develop modeling analysis for the Kaplan micro-turbine, which can improve economical features of small hydro power plants. The contents and scope of this research are the efficiency improvement of Kaplan micro-turbine.

• Journal of Korea Water Resources Association
• /
• v.39 no.7 s.168
• /
• pp.575-581
• /
• 2006

This paper presents a systematic approach for the economical design of stormwater quality control systems. For the design of runoff quality control system (RQCS), the rainfall-runoff process requires the local rainfall data recorded continuously. In this study the rainfall probability distribution is assumed to follow an exponential decay function. Applying the exponential decay function, the normalized curves are derived to explain the non-exceedance probability distributions. The optimal curves for the determination of the RQCS size are derived based on the overflow risk. Comparison of the optimal capture volume and peak runoff rate to those computed by an urban rainfall-runoff model(ILLUDAS) demonstrates that the optimal CSOs(Combined Sewer Overflows) curves derived in this study can be utilized for the design of stormwater quality control systems in Korea avoiding an excessive computational effort based on over flow risks.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.753-762
• /
• 2002

In-stream vegetation is an essential element of a stream channel. Vegetation plays an important role in flood control and the natural environment in stream channels. This research investigates the relationship between in-stream vegetation and stream changes. This study investigates the distribution characteristic of vegetation in some rivers of Korea. Although there are many physical factors that cause changes to streams, this research verified that in-stream vegetation caused sediment deposition. A hydraulic model experiment was conducted. Tests were conducted in a simulated gravel bed stream (bed slope 1/200) with Phragmites japonica. The average diameter of the bed load used was 0.3 mm and 27 kg were uniformly supplied for 1 hour under same hydraulic conditions. The deposition and scouring as well as the change of flow differed according to the density and arrangement of the Phragmites japonica. In-stream vegetation and stream channel change are closely related because deposition and scouring affects the distribution of vegetation.

• Journal of Surface Science and Engineering
• /
• v.41 no.6
• /
• pp.274-278
• /
• 2008

3-dimensional numerical analysis for a rectangular magnetron cathode model is done to predict cooling characteristics of high power sputtering system for ZnO deposition. It includes cooling channel design, heat transfer analysis of a target, bonding layer and backing plate. In order to model erosion profiles of a target, ion current density distribution from 3D Monte Carlo simulation is used to distribute total sputtering power to 5 discrete regions. At 3 kW of sputtering power and cooling water flow of 1 liter/min at $10^{\circ}C$, the maximum surface temperature was $45.8^{\circ}C$ for a flat new target and $156^{\circ}C$ for a target eroded by 1/3 of its thickness, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.173-179
• /
• 2016

This is a numerical study on the curved channel type of hydrogen reformer using the commercial code of fluid dynamics. We numerically compared the numerical model in a previous study model and the modelling of a tube type curved channel. In the result of numerical analysis on 4 types of curved channel reformers, the methanol conversion efficiency of type 1~4 were 45.0%, 45.3%, 45.6%, 45.6% respectively, and there was hardly any difference by ${\pm}0.6%$. In light of flow characteristics, the rectangle type tube and the type 2 with $45^{\circ}$ turn showed most uniform flow characteristics and concentration distribution of methanol, and the circular type tube and the type 3 with $90^{\circ}$ turn had most un-uniform flow characteristics and concentration distribution of methanol. We concluded that the design for curved channel reformer has to have rectangle type tube with curve of almost $45^{\circ}$ as in the type of curved pipe with $45^{\circ}$ turn.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.83-90
• /
• 2020

Plate heat exchangers(PHE) have been commercialized since the 1920s. Since then, although the basic concept of PHEs has changed little, its design and construction have progressed significantly to accommodate higher temperatures, higher pressures, and large heat exchanging capacities. The development trend of PHEs is consistent with heat plate developments with better thermal efficiency, lower pressure drop, and good flow distribution. The purpose of this paper is to introduce the main development processes of a plate cooler for medium-speed engine lubricant oil cooling in vessels which is in line with the development trend of PHEs and to provide its thermal performance data that were found out during experimental tests. The plate cooler in this study cannot measure the wall temperatures directly due to its structural characteristics, so the heat transfer coefficients were calculated using the modified Wilson Plot method. The water-to-water tests were first conducted experimentally to figure out the characteristics of heat transfer coefficients and pressure drops on the water side and then the water-to-oil tests followed to obtain the heat transfer coefficients on the oil side. The test results showed that heat transfer coefficients and pressure drops on both water and oil side increased with flow rates, and it was also found that all the development targets of the plate cooler in this study were achieved successfully.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.404-408
• /
• 2004

인공순환수로 실험구간에 반구구조물을 설치하지 않은 경우와 설치할 경우의 흐름특성을 분석하기 위하여 수치모의를 수행하였다. 수치모의는 FLUNET가 제공하는 RNG $k-\varepsilon$ 모형과 Reynolds Stress 모형을 사용하였으며 음파유속계(ADV)를 이용하여 측정한 결과와 비교분석 하였다. 수치모의와 실험결과의 상관성을 분석한 길과, RNG $k-\varepsilon$과 Reynolds Stress 모형의 계산결과와 실측값의 상관계수는 반구구조물을 설치하지 않은 경우 0.60 - 0.63, 반구구조물을 설치한 경우 0.75 - 0.78로 큰 차이가 없었다. 그러나 계산반복회수의 경우 RNG $k-\varepsilon$ 모형이 Reynolds Stress 모형에 비하여 2 - 5배 정도 빠르다. 두 모형의 걸과가 크게 차이가 나지 않으므로 순환수로 내의 흐름특성을 분석하기 위한 모형으로 수렴속도가 빠른 RNG $k-\varepsilon$ 모형을 선정하였다. 수치모의 결과와 "흐름 메카니즘에 의한 깔따구의 분포(I)- 실험"의 깔따구 분포경향을 비교한 결과 깔따구는 전반적으로 유속과 난류강도가 작은 곳에 분포하였으며 실험구간에 반구구조물이 있는 경우에는 구조물의 상${\cdot}$하류에 깔따구가 분포하였다. 이차류 또한 깔따구의 분포에 영향을 미친다. 향후 흐름특성에 따른 저서생물의 분포경향을 분석을 위하여 전산유체역학의 기법들을 적용하면 깔따구 등의 저서성 대형무척추 동물의 분포와 흐름특성의 관계를 저렴한 비용으로 분석할 수 있을 것이다.

• ALGAE
• /
• v.23 no.2
• /
• pp.135-140
• /
• 2008

A field survey for dinoflagellate cysts was carried out from May 2000 to November 2002 for the Southwest Sea of Korea. A total dinoflagellate cysts identified were 33 species, which belonged to 17 genera, 31 species, and 2 unidentified species. A cysts density were 16-1,501 cysts-gdry$^{-1}$. The dominant species of dinoflagellate cysts in the Southwestern Sea of Korea were Spiniferites bulloideus and Scrippsiella trochoidea, which are autotrophic species. To investigate the environmental characteristics of the Southwestern Sea of Korea using the dinoflagellate cysts, a principal component analysis (PCA) was conducted using the data collected from a total of 51 stations. From the score distribution map by the PCA, the Southwestern Sea of Korea was largely divided into three regions according to the first primary component and the second primary component. In other words, Group 1 was the western sea area of Mokpo and Jindo, Group 2 was the outer sea area of the South Sea, and Group 3 was the coastal areas of the South Sea around the Archipelago. It was found that this division of sea area was influenced by effects of the sea environment of the coastal areas of Korea. The coastal areas of Mokpo and Jindo that belong to Group 1 were affected by the cold Yellow Sea water. The outer sea area of the central parts of the South Sea that belong to Group 2, which is the boundary between the Southern coastal water of Korea and the Tsushima warm water, was subject to the formation of temperature fronts throughout the year, while Group 3 was affected by the coastal waters of Korea. It was also found that this division was in close relationship with the distribution of sediment facies in the bottom layer. From the above results, the environmental factors that influence the cyst distribution in he Southwestern Sea of Korea were found to include the eutrophication status of the sea area, the physical characteristics of the sea environment such as the flow of sea current and fronts, the sediment facies in the bottom layer, and the appearance volume of motile cells.