• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.125-126
• /
• 2007

In this paper, the floating body with vertical plate is introduced with a study on the flow patterns and characteristics in around the floating body by using 2 frame particle tracking method. This paper introduce an analysis method to predict the characteristics if flow around the neighboring fields if Floating Body with vertical plate in order to investigate a high performance model. Flow visualization has conducted in a drcu1ating water channel by a high speed camera and etc. Flow phenomena according to turbulence intensity distribution and flow separation around the floating body with vertical plate were obtained by two-dimensional PIV system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.355-365
• /
• 1994

An analytical model of return flow is presented outside the surf zone. The governing equation is derived from the Navier-Stokes equation and the continuity. Each term of the governing equation is evaluated by the ordering analysis. Then the infinitesimal terms, i.e. the turbulent normal stress, the squared vertical velocity of water particle and the streaming velocity, are neglected. The driving forces of return flow are calculated using the linear wave theory for the shallow water approximation. Especially, the space derivative of local wave heights is described considering a shoaling coefficient. The vertical distribution of eddy viscosity is discussed to the customary types which are the constant, the linear function and the exponential function. Each coefficient of the eddy viscosities which sensitively affect the precision of solutions is uniquely decided from the additional boundary condition which the velocity becomes zero at the wave trough level. Also the boundary conditions at the bottom and the continuity relation are used in the integration of the governing equation. The theoretical solutions of present model are compared with the various experimental results. The solutions show a good agreement with the experimental results in the case of constant or exponential function type eddy viscosity.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.667-678
• /
• 2023

In this study, quasi-3D inundation flow simulations were conducted for a simplified subway station configuration. The effects of variations in rainwater inflow locations and discharge were investigated, analyzing the resulting inundation flow patterns and flood risk. The inundation simulation results calculated the incipient velocities for slipping and toppling accidents to assess pedestrian safety. The results indicated that velocities exceeding the incipient velocity for slipping accidents mainly occurred on the flooded staircase. Meanwhile, velocities surpassing the incipient toppling accidents were observed around the staircase and the corridor near the staircase leading to B2F. This observation is consistent with the results from the specific force distribution analysis. To provide detailed flood risk assessments, the Flood Hazard Degree (FD) was applied with four levels of criteria, along with the Flood Intensity Factor (FIF). The results demonstrated that FD identified a broader area at risk of flood-induced consequences compared to FIF. When comparing the different inundation risk assessment methods, the specific force method tended to overestimate the risk area, whereas FIF tended to underestimate it. Furthermore, among all assessment methods, the influence of rainwater discharge was found to have a more dominant effect on flood risk assessment compared to the number of rainwater inflow locations. Additionally, the direction of inundation flow influenced the assessed risk, with collision-induced flow patterns leading to higher flood risk than those with identical flow directions.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1119-1130
• /
• 2018

Soyang Lake has been contributing to economic growth by preventing flood damage in the metropolitan area, the water level in the middle to upper flow of lake has been greatly decreased due to the drought in 2015. In order to restore the existing flow rate, Bupyungbo has been built in Bupyeong-ri, Shin Nam-myeon, Inje-gun to cause artificial changes on the sedimentary environment of Bupyeong freshwater region. Therefore, this study intends to confirm the changes of sedimentary environment since Bupyeongbo has been utilized. For this study, we used the Sentinel-2 satellite image data periodically to measure the dimension of water according to the volume of water kept near Bupyung district and analyzed the particle size and the percentage of water content of the sediments through field study. The Sentnel-2 satellite images showed us how the water surface has been changed and that during the period from September 2017 to October 2018, the minimum and maximum area of water surface was observed in June 2018 and in January 2018, respectively. In addition, we find that the smaller being the particle size, the higher having the water content and that there is higher the correlation between the water content and the grain size of the sediment layer. Hereafter, if we will acquire the drone images at Bupyung district, we expect that we will be able to measure the distribution of sediments in the same area according to different time periods and observe various kinds of sediment through field work.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.697-707
• /
• 2008

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) by Kim (1998) predicts the temporal variation and spatial distribution of overland flow, subsurface flow and stream flow in a watershed. The model programmed with C++ language on Unix operating system adopts single flowpath algorithm for water balance simulation of flow at each grid element. In this study, we attempted to improve the model by converting the code into FORTRAN 90 on MS Windows operating system and named as ModKIMSTORM. The improved functions are the addition of GAML (Green-Ampt & Mein-Larson) infiltration model, control of paddy runoff rate by flow depth and Manning's roughness coefficient, addition of baseflow layer, treatment of both spatial and point rainfall data, development of the pre- and post-processor, and development of automatic model evaluation function using five evaluation criteria (Pearson's coefficient of determination, Nash and Sutcliffe model efficiency, the deviation of runoff volume, relative error of the peak runoff rate, and absolute error of the time to peak runoff). The modified model adopts Shell Sort algorithm to enhance the computational performance. Input data formats are accepted as raster and MS Excel, and model outputs viz. soil moisture, discharge, flow depth and velocity are generated as BSQ, ASCII grid, binary grid and raster formats.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.311-316
• /
• 2017

기후변화는 물 관리 측면에서 많은 변화를 일으키는 것으로 보고되고 있다. 주로 강우의 패턴을 변화시키며, 가용수자원의 지역적 편중을 심화시킨다. 기후변화에 적응하며 안정적이고 균등한 용수확보를 위해서는 홍수와 가뭄을 고려한 연속적인 물 순환 해석기술이 필요하다. 강우유출분석은 강우사상에 대한 수문순환과정을 통해 유출량을 산출하는 것으로, 주로 직접유출과 중간유출이 이에 해당된다. 강우발생 이후 무강우기간에 대해서는 기저시간 이후에 발생되는 유출량의 정량적 산출이 필요하다. 기저유출은 강우 발생 시점에 급격히 발생하기보다는 선행강우에 따른 유역 내 지하수위 분포와 대수층의 특성, 하천수위에 따라 다양한 패턴으로 나타나기 때문에 지하수대의 수리학적 성분들을 반영할 수 있어야 한다. 이를 위해서는 강우유출모의 시 지표유출량 산정과 지하수유동해석을 통한 기저유출량 산정이 동시에 이루어져야 한다. 최근 국내외에서는 다양한 형태의 수문모형과 MODFLOW를 연계한 장기유출분석에 대한 연구가 활발하게 진행되고 있다. 본 연구에서 활용한 K-DRUM(K-water Distribution Runoff Model)은 K-water에서 자체 개발한 물리적 기반의 분포형 강우유출모형으로 강우유출, 유사, 기초수질항목에 대한 3차원 분석이 가능하다. 본 모형의 A층(표층)은 지표유출을 고려한 운동파법이 적용되었고, B층과 C층(중간층), D층(지하수층)은 선형저류법이 적용되었다. MODFLOW(A Modular Three-Dimensional Finite-Difference Ground Water Flow Model)는 1980년대 USGS(United State Geolog ical Survey)에서 개발된 가장 범용적으로 사용되는 지하수유동모형이며, 모듈화 된 구조를 갖고 있어 다양한 패키지 중 필요로 하는 기능을 독립적으로 모의할 수 있는 장점이 있다. 본 연구에서는 향후 기후변화에 따른 강우의 불확실성에 대비한 유역의 장기 물순환 해석을 위해 강우유출모형인 K-DRUM과 지하수유동모형인 MODFLOW를 연계하고자한다. 연계방법은 K-DRUM에서 계산된 D층으로 침루되는 양을 MODFLOW의 함양량으로 적용하고, MODFLOW에서 산출된 기저유량을 K-DRUM의 하천유출에 적용하는 것이다. 본 연구의 성과를 갈수기 유출해석에 적용하면 정확성을 크게 향상시킬 수 있을 것으로 판단된다.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.84-87
• /
• 2024

A water sterilization system is developed utilizing a 275 nm-wavelength LED light source equipped with a TIR lens. The system's light source is constructed by combining a 275 nm-wavelength UVC LED, known for its germicidal properties, with a TIR lens having a direction angle of 6.8 degrees. The optical simulation software 'LightTools' is employed to design and optimize the intensity of deep ultraviolet sterilizing light irradiation, its distribution, and sterilization capacity. In the inactivation experiment with E. coli, the water sterilizer system achieved a sterilization rate of 78.92 % while maintaining a water flow capacity of 50 L/min. Compared to the conventional mercury lamp light source water sterilizer system, the UVC LED water sterilizer system addresses environmental concerns related to mercury usage and offers advantages in terms of lifespan and durability.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.2
• /
• pp.5-12
• /
• 2018

Underground cavities could induce road subsidence, which have been frequently observed in urban areas. Therefore, adequate backfilling materials and the restoring methods of the cavities are required to prevent the road subsidence. The objective of this paper is to evaluate the suitability of backfilling methods using foaming lightweight grouting materials considering the flow values, unit weights, and air contents at slurry and expanded states, and unconfined compressive strengths. The grouting materials consist of water, cement, and foaming agent whose proportions of water, cement, and foaming agent are 25: 25: 1.0 and 25: 25: 1.2. The flow values of the two materials are greater than 200 mm, and their unconfined compressive strengths at 28 days age are smaller than 1.3 MPa. From the results, the two proportions of materials are expected to be effectively used as a backfilling material. However, the material components should be carefully mixed because poor mix of these materials could induce non-homogeneous distribution of air bubbles. The unexpectedly non-homogeneous distribution of air bubbles may induce significant cracks or additional cavities.

• Journal of Korea Water Resources Association
• /
• v.49 no.4
• /
• pp.315-325
• /
• 2016

Generally, a natural river discharge is highly regulated by the hydraulic structures, and the regulated flow is substantially different from natural inflow characteristics for the use of water resources planning. The natural inflow data are necessarily required for hydrologic analysis and water resources planning. This study aimed to develop an integrated model for more reliable simulation of daily dam inflow. First, a piecewise Kernel-Pareto distribution was used for rainfall simulation model, which can more effectively reproduce the low order moments (e.g. mean and median) as well as the extremes. Second, a Bayesian Markov Chain Monte Carlo scheme was applied for the SAC-SMA rainfall-runoff model that is able to quantitatively assess uncertainties associated with model parameters. It was confirmed that the proposed modeling scheme is capable of reproducing the underlying statistical properties of discharge, and can be further used to provide a set of plausible scenarios for water budget analysis in water resources planning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.189-193
• /
• 2010

RMA-2, Telemac-2D, River2D 등 기존의 대부분 국내외 상용모형에서는 내부 경계인 하천구조물과 외부 경계인 측벽에서의 경계조건을 활동조건(slip condition)으로 가정하여 흐름장을 계산하였다. 그러나 실제로 벽면에서는 마찰력에 의해 흐름이 존재하지 않는 무활조건(no slip condition)이 물리적으로 타당하다. 따라서 본 연구에서는 내부구조물인 교각이 존재하는 영역에서의 수평 2차원 유속분포를 구하기 위해 천수방정식을 Galerkin법과 Newton-Raphson법에 의해 이산화한 수치모형을 개발하였다. Yulistiyanto 등(1998)이 수치모의 및 수리실험에 사용한 조건을 채택하여 벽면에서의 접선방향 유속이 존재하는 활동조건과 벽면에서 유속이 없는 무활조건을 부여하고 교각을 포함한 수로에서 유속, 수위 및 전단분포를 해석하였다. 활동경계조건을 적용한 경우 교각 표면을 따라 큰 유속이 분포하고 후면에서도 관성력에 의해 흐름방향 유속이 두드러지게 나타났으나 무활조건을 적용한 경우 교각 후면에서 와가 형성되고 후류현상이 두드러지게 나타났다. 무활조건을 적용한 경우 교각 전면부에서는 선수파(bow wave)가 4 cm정도 높게 나타났으며 교각 측면부에서는 2 cm 높게 나타났다. 반면 교각 후면에서는 후류의 영향으로 수면이 2 cm 낮게 분포하였다. 교각부에 작용하는 전단력을 분석한 결과 무활조건을 적용한 경우가 활동조건을 적용한 경우에 비해 최대 6배 높은 전단력이 나타났다.