• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.115-123
• /
• 2018

Various types of robots running on power transmission lines have been developed for the purpose of line patrol monitoring. They usually have complex mechanism to run and avoid obstacles on the power line, but nevertheless did not show satisfactory performance for going over the obstacles. Moreover, they were so heavy that they could not be easily installed on the lines. To compensate these problems, flying robots have been developed and recently, multi-copter drones with flight stability have been used in the electric power industry. The drones could be remotely controlled by human operators to monitor power distribution lines. In the case of transmission line patrol, however, transmission towers are huge and their spans are very long, and thus, it is very difficult for the pilot to control the patrol drones with the naked eye from a long distance away. This means that the risk of a drone crash onto electric power facilities always resides. In addition, there exists another danger of electromagnetic interference with the drones on autopilot waypoint tracking under ultra-high voltage environments. This paper presents a patrol monitoring plan of autopilot drones for power transmission lines and its field tests. First, the magnetic field effect on an autopilot patrol drone is investigated. Then, how to build the flight path to avoid the magnetic interference is proposed and our autopilot drone system is introduced. Finally, the effectiveness of the proposed patrol plan is confirmed through its field test results in the 154 kV, 345 kV and 765 kV transmission lines in Chungcheongnam-do.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.151-159
• /
• 2018

Accident rate in the construction industry of South Korea is increasing every year, and it represents the highest percentage among industries. This shows that activities performed to prevent safety accidents in the country are not efficient when it comes to reduce the accident rate. In order to resolve this issue, a model for the prediction of human accidents should be established. In addition, it is required a quantification study based on pattern of human accidents. Therefore, the objective of this study is to quantify uncertainty of human accidents risk and predict how to change in various circumstances by using Monte Carlo Simulation. To achieve the objective, first, pattern of human accidents was defined. Second, insurance claim payout and information of human accidents during 14 years in construction site were collected. Third, descriptive analysis is conducted to determine the characteristics of the accident pattern. Fourth, to quantitatively analyze the pattern of the human accidents, the population of each accident occurrence and payout were estimated. Finally, estimated populations was analyzed according to characteristics of distribution by using Monte carlo simulation. In the future, this study can be used as a reference for developing the safety management checklist in construction site and development of prediction models of human accident.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.279-286
• /
• 1991

Much of the working population in developing countries are engaged in shift work now and the number of shift workers is not expected to decrease in the future mostly because the need for continuity of production is increasing. Therefore, the possible effects of shift work on health are of particular interest, and in fact, there have been many epidemiological studies on shift work since the first world war. However, no studies on health effects of shift work have been reported in Korea, and the existing studies in western world have arrived at quite different conclusions mainly because the conditions of work other than shift work, such as age and selection of workers, work environment, and labor conditions also influence the health of workers. This study was firstly carried out in Korea to investigate the health risks related to shift work with 2,093 female workers randomly selected from three major manufacturing industries in proportion to total number of female workers in those industries. Differences of work conditions other than shift work in this study were adjusted by multivariate analysis. Ma findings obtained from this study are as follows : 1. There were significant differences between shift and day workers in the distribution of age, type of industry, condition of noise and dust, regularity of mealtime, working position, and working duration. Shift workers tended to be younger, to have shorter working duration, to have more irregular mealtime, to work in standing position, and to work under more noisy and dusty environment than day workers. 2. Univariate analysis showed that shift work increased the Todai Health Index (THI) scores of digestive tract, respiratory tract, and mental instability symptom categories. Shift work also increased days of sickness absence and number of industrial accident per 100 workers per month. 3. Multivariate analysis that adjusted the differences of demographic, occupational and non-occupational health-related working conditions showed that digestive tract symptom and mental instability symptom scores were significantly higher in shift workers than those in day workers. Based on these study results, it is concluded that the shift work has significant effects on some psychophysiological conditions of the workers and the effects are also influenced by several other personal and working conditions.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.364-368
• /
• 2007

The purpose of this study was to improve the stability and the processing property of vitamin C. Vitamin C was coated according to particle size(80-100 mesh, 100-140 mesh) and mixing ratio(1:1.6, 1:2.5, 1:3(w/w)) with coating solution(8% Zein-DP, 6% HPMC-FCC), and then the quality characteristics of fluidized bed micro coated vitamin C were investigated. The coating efficiency and the thickness of coating film were higher in $80{\sim}100$ mesh particle than in $100{\sim}140$ mesh particles, and coating efficiency was decreased as the coating material was increased. The distribution range of particle was more narrow in mixing ratio of 1:3(w/w) than in the other. DPPH radical scavenging activity was not affected by the particle size and the mixing ratio. There was no difference between the coating materials in terms of the quality characteristics. The optimum coating condition for fluidized bed micro-coating of vitamin C powder was selected as the particle size of $80{\sim}100$ mesh and the mixing ratio with coating solution of 1:3(w/w).

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.158-175
• /
• 2022

This study discusses mass unemployment and job insecurity due to the 4th industrial revolution and technological progress. In particular, the construction automation service method can contribute to increasing work productivity, preventing on-site safety accidents, and enhancing the competitiveness of the construction industry according to rapid development and convergence between technologies. However, there is great concern that the position of workers will decrease and the income distribution will deteriorate. Therefore, this study is necessary to alleviate the anxiety of the labor market and to find a direction for the government and all walks of life to ponder. To carry out this study, in-depth interviews were conducted with two experts currently engaged in the construction field, and through analysis, we intend to derive meaning and identify current trends, identify necessary improvement measures and institutional areas and suggest research directions. As a result of the analysis, it is possible to suggest a response strategy in a total of three themes: purpose, implication, and strategy. Based on this, there are response strategies in four areas: (1) industrial site response, (2) worker response, (3) education, and (4) training response, and government and corporate response. Through this study, it is necessary to revitalize economic and sociological discussions in the future so that the improvement in productivity and efficiency of society as a whole due to technological innovation of construction automation services does not lead to social problems such as an increase in the unemployment rate and a decrease in jobs in the labor market.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.2
• /
• pp.111-122
• /
• 2024

This study was conducted to evaluate agronomic traits and classify phylogenetic characteristics of Korean wheat landraces (KWLs) collected in Gyeongnam province. We used the squash method for chromosome observation, image analysis to examine seed characteristics, and genotyping using commercial single-nucleotide polymorphism chips to construct a phylogenetic tree. All KWLs contained 42 chromosomes and two pairs of microsatellites as observed in Keumgang, a Korean wheat cultivar. All KWLs showed smaller seed traits compared with those of Keumgang, although KWL-3 had a larger embryo length than that of Keumgang. Among agronomic traits compared with those of Keumgang, all KWLs had a late heading date and ripening period except for KWL-3, which showed the smallest culm and spike length. KWL-1 had the lowest tiller, highest floret, and grain number. All KWLs showed a lower thousand grain weight than that of Keumgang because of their smaller seeds. In the variation of variety and area, the heading date, ripening period, tiller number, and floret number were affected by the cultivation area, whereas the culm length, spike length, and 1000 grain weight were affected by the variety. Correlation distribution analysis showed differences in agronomic traits according to the cultivation area, and the heading date was positively correlated with the culm length and floret number in three cultivation areas. Principal component analysis explained that the heading date had a positive relationship with the ripening period and floret number and a negative relationship with the tiller number. Principal component analysis also revealed that all KWLs had a lower thousand grain weight than that of Keumgang. Phylogenetic tree showed that KWL-1 was near KWL-3, while KWL-2 was near KWL-4. All KWLs were genetically near the Korean wheat cultivars milsung and saeol, whereas they were genetically far from the Korean wheat cultivars goso and olgrue.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.204-210
• /
• 2011

This experiment was conducted to investigate the effect of water states (water, osmotic potential and turgor pressure) of fruit vesicle and leaf on soluble solids and organic acid contents of fruits of 'Shiranuhi' mandarin hybrid, M16 A line during the fruit maturing season in plastic house cultivation. The 'Shirauhi' grafted on 'Swingle citrumelo', strong strength of rootstock, produced fruit with lower soluble solids and organic acid content than 'Trifoliate' orange rootstock. The fruits vesicle water potential and turgor pressure measured before dawn in 'Swingle citrumelo' were higher tendency than the 'Trifoliate' orange, but osmotic potential values were lower than the 'Trifoliate' orange. The changes of leaf water potential were very similar to the fruit. The results suggest that in the 'Shirauhi' fruits grafted on two rootstocks changes of soluble solids and organic acid content of the fruit were influenced by the leaf water potential and the osmotic potential of the fruit vesicles, which might be caused by the difference of root distribution between two rootstocks.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.569-578
• /
• 2003

This paper presents a method in which the user produces a real-time facial animation by navigating in the space of facial expressions created from a great number of captured facial expressions. The core of the method is define the distance between each facial expressions and how to distribute into suitable intuitive space using it and user interface to generate realtime facial expression animation in this space. We created the search space from about 2,400 raptured facial expression frames. And, when the user free travels through the space, facial expressions located on the path are displayed in sequence. To visually distribute about 2,400 captured racial expressions in the space, we need to calculate distance between each frames. And we use Floyd's algorithm to get all-pairs shortest path between each frames, then get the manifold distance using it. The distribution of frames in intuitive space apply a multi-dimensional scaling using manifold distance of facial expression frames, and distributed in 2D space. We distributed into intuitive space with keep distance between facial expression frames in the original form. So, The method presented at this paper has large advantage that free navigate and not limited into intuitive space to generate facial expression animation because of always existing the facial expression frames to navigate by user. Also, It is very efficient that confirm and regenerate nth realtime generation using user interface easy to use for facial expression animation user want.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.286-299
• /
• 2017

The Korean performing arts has been facing stagnation due to oversupply, lack of effective distribution system, and insufficient business models. In order to overcome these difficulties, it is necessary to improve the efficiency and accuracy of marketing by using more objective market data, and to secure audience development and loyalty. This study considers the viewpoint that 'Big Data' could provide more general and accurate statistics and could ultimately promote tailoring services for performances. We examine the first case of Big Data analysis conducted by a credit card company as well as Big Data's characteristics, analytical techniques, and the theoretical background of performing arts consumer analysis. The purpose of this study is to identify the meaning and limitations of the analysis case on performing arts by Big Data and to overcome these limitations. As a result of the case study, incompleteness of credit card data for performance buyers, limits of verification of existing theory, low utilization, consumer propensity and limit of analysis of purchase driver were derived. In addition, as a solution to overcome these problems, it is possible to identify genre and performances, and to collect qualitative information, such as prospectors information, that can identify trends and purchase factors.combination with surveys, and purchase motives through mashups with social data. This research is ultimately the starting point of how the study of performing arts consumers should be done in the Big Data era and what changes should be sought. Based on our research results, we expect more concrete qualitative analysis cases for the development of audiences, and continue developing solutions for Big Data analysis and processing that accurately represent the performing arts market.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.483-487
• /
• 2016

The damage of citrus fruits caused by Scirtothrips dorsalis Hood has being increased in Jeju, Korea. The seasonal abundance of S. dorsalis and its injury symptoms in citrus orchards have been studied since the endemic outbreak in Jeju, but studies for the occurrence pattern of S. dorsalis in citrus orchards influenced by adjacent primary hosts have not been fully conducted yet. We selected kiwi- and mango-citrus adjacent orchards to study the migration pattern of S. dorsalis toward to citrus orchards. Yellow-colored sticky traps were used for monitoring the seasonal abundance of S. dorsalis and their migration pattern in two orchards. In citrus orchards, also, we placed sticky traps at 0, 5, 10, 15 and 20 m apart from the border of kiwi orchard, and 0, 7 and 20 m apart from the border of mango orchard. The seasonal occurrence pattern of S. dorsalis caught on sticky traps were similar between two adjacent orchards. However, the abundances in kiwi or mango orchard was much higher than those of citrus. Also, it was found that densities, distribution and damage of S. dorsalis in citrus orchards depend highly on the distance from the border of kiwi and mango orchards. This result suggested that the primary hosts such as kiwi and mango plants influence the occurrence of S. dorsalis in adjacent citrus orchards. And this information may provide a basic direction for establishing the management strategy of S. dorsalis in citrus orchards.