• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.823-828
• /
• 1993

The performance of ferrite composite microwave absorber has been evaluated as the matching frequency, the matching thickness and the band width. Especially, matching frequency is very important in application of microwave absorber because it determines operating frequency range. In this study, the ferrite composite microwave absorbers consisted Ni-Zn ferrite and Zn2Y ferroxplana were prepared in order to control matching frequency. Then, the variation of the material constants and microwave absorbing characteristics were investigated with various ferrite mixing ratio. The material constants of ferrite composite microwave absorber could be controlled by variation ferrite mixing ratio. Therefore, it was confirm that matching frequency of microwave absorber could be shifted by control of material constants.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.756-761
• /
• 2003

고성능 광대역 복합형 전자파 흡수체를 개발하기 위해 지금까지 지지재로 주로 사용되어오던 Silicone과 CPE 그리고 본 연구에서 새롭게 제안하는 전통 옻에서 사용되어 오던 옻에 대한 전자파 흡수능을 조사하였다. 또한 이들과 MnZn 페라이트를 혼합한 전자파 흡수체를 제작하여 이들의 전자파 흡수능을 조사하였다. 옻을 지지재로 한 MnZn 페라이트 복합형 전자파 흡수체는 CPE와 Silicone을 지지재로 한 전자파 흡수체에 비하여 광대역에서 우수한 전파흡수특성을 나타내었다.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.49-54
• /
• 1991

본 연구에서는 복합 ferroxplana 전파흠수체의 X-band에서의 재료정수와 전파흡수특성과의 상관관계를 규명하였다. Ferroxplana 분말과 지지재인 고무와의 함량비(F/R)가 증가함에 따라 ${\mu}_{r}'$은 감소하며, ${\mu}_{r}"$은 증가하였다. 전파흡수체의 두께가 증가함에 따라 최대반사감쇠량이 얻어지는 주파수 가 낮은쪽으로 이동하였으며, 흡수체의 두께가 2.6mm인 경우에는 대역폭이 우수하였고, 두께가 3.2mm인 경우에는 반사감쇠량이 우수하였다. 복합 ferroxplana 전파흡수체의 재료 정수를 광대역화에 요구되는 전파흡수체의 재료정수영역에 적용하여 전파흡수특성을 정량적으로 도출하였으며 이러한 재료 정수영역의 설정은 광대역 ferrite 전파흡수체의 설계지침으로 활용이 가능하다.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.415-419
• /
• 1994

The material constants(the complex permeability and permittivity) of ferrite composite determine its microwave absorbing characteristics. Therefore, in order to improve the microwave absorbing characteristics, it is necessary to control the material constants of the ferrite composite. In this study, the method of improving microwave absorbing characteristics by control of permittivity of ferrite composite which has not satisfying matching condition in C-X band (4 GHz~12.4 GHz) was investigated. It was possible to control the permittivity by adjusting graphite loading ratio in the ferrite composite microwave absorber. It was also concluded that the control of permittivity of ferrite composite is effective method to improve the microwave absorbing characteristics.

• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.293-297
• /
• 1992

A proper combination of complex permeability and permittivity is necessary to produce the zero-reflection microwave absorber with an impedance matching. Increasing of dielectric permittivity and development of an impedance matching was investigated in ferrite-rubber composite specimens by addition of conducting materials. Graphite powder of high dielectric constant was added to the composite specimens to increase the permittivity. The precise estimation of graphite content to produce the matched-wave-impedance absorber at a given frequency can be made by using the numerically derived solution map of impedance matching. It was suggested that permittivity adjustment is an effective technique to obtained the microwave absorber with both good absorbing properties and small thickness as well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1355-1357
• /
• 1997

In this study, the ferrite/rubber composite microwave absorbers mixed Ni-Zn ferrite and $Ni_2Y$ ferroxplana were prepared in order to control matching condion. The variation of the material constants($\dot{\varepsilon}$, $\dot{\mu}$) and microwave absorbing characteristics were investigated with various ferrite mixing ratio. The material constants of ferrite/rubber composite microwave absorber could be controlled by variation ferrite mixing radio. The matching frequency and thickness could be controlled with various ferrite mixing ratio.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1406-1408
• /
• 1994

In recently, there is growing demand for microwave absorbing matrial, and for the design method of microwave absorber. We developed a new method to design the matching frequency and matrial thick for ferrite/rubber composite absorber. Ni-Zn ferrite prepared with coprecipitation was compounded with silicon rubber, and, subsequently, pressed to ring specimen. The matrial constant of the ferrite/rubber composite absorber was used to design the matching frequency and matrial thick with matching map. In this study, we could predict matching condition from the design method. Foremore, using matching boundary map, we could also predict the condition of over 20[dB] attenuation.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.64-67
• /
• 1998

Microwave absorbing properties of ferrite-epoxy composite (absorbing layer) attached on the carbon fiber polymer composite (reflective substrate) are analyzed on the basis of wave propagation theory. A modified equation for wave-impedance-matching at the front surface of absorbing layer including the effect of electrical properties of the quasi-conducting substrate is proposed. Based on this analysis, the frequency and layer dimension that produce zero-reflection can be estimated from the intrinsic material properties of the obsorbing layer and the substrate. It is demonstrated that the microwave reflectivity of carbon fiber composite has a strong influence on the microwave absorbance of front magnetic layer.

• Composites Research
• /
• 제27권6호
• /
• pp.225-230
• /
• 2014

In this study, a novel microwave absorber which consists of a structural part, a resistive sheet, and a low dielectric layer is proposed. Unlike the conventional Salisbury screen, a newly proposed absorber is capable of a range of absorbing performance, from narrowband to broadband. In the case of the narrowband absorber, the fabricated absorber with optimized design parameters has a strong resonance at 9.25 GHz and reflection loss of -44 dB with satisfying the -10 dB absorption in whole X-band (8.2 GHz~12.4 GHz). For the broadband absorber design, the reflectivity was minimized in the considered frequency ranges. The designed absorber showed two weak resonances near 6.5 GHz and 16.5 GHz and satisfied the -10 dB absorption from C-band to Ku-band (4 GHz~18 GHz). The measured reflection loss of fabricated absorber was well matched with simulation results, though the measurement was only performed on X-band. For the Salisbury screen to be capable of broadband absorption, it should be stacked multiply in a structure known as the Jaumann absorber. However, for the microwave absorber presented here, broadband as well as narrowband capabilities can be implemented without a change of the structure.

• Composites Research
• /
• 제29권3호
• /
• pp.98-103
• /
• 2016

본 연구에서는 반도체 섬유 강화 복합재료를 이용하여 전자파 흡수 구조를 제작하였다. 두 종류의 반도체 섬유를 사용하여 복합재료를 제작하고, 자유공간 측정 장비를 이용하여 각각의 전자기적 물성을 측정하였다. 두께 최적화 방법으로 두 종류의 단층형 흡수 구조와 한 종류의 이층형 흡수 구조를 설계하였다. 설계한 전자파 흡수 구조를 반도체 섬유 강화 복합재료로 제작하고 그 흡수 성능을 측정하였다. 사용된 두 재료의 유전율은 Cole-Cole plot에 나타내었을 때 무반사 곡선에 가깝지 못하여 높은 흡수 성능을 기대하기 어려웠다. 두 종류의 재료로 제작한 단층형 흡수 구조는 10 GHz 근처에서 각각 -14.2 dB와 -8.8 dB의 흡수 성능을 보였다. 이러한 한계점을 보완할 수 있는 이층형 전자파 흡수 구조는 10 GHz 근처에서 -43.9 dB의 좋은 흡수 성능을 보였다. 반도체 섬유 강화 복합재료로 제작한 이층형 전자파 흡수 구조는 기존의 전자파 흡수 구조에 비해 간단한 제작 과정을 거쳐 좋은 흡수 성능을 갖는 흡수 구조를 얻을 수 있었으며, 상대적으로 더 적은 오차 요인을 갖고 있다.