• 제목/요약/키워드: the basic and the modified type

검색결과 130건 처리시간 0.031초

코르셋 타입 하네스의 신체 하중압력 분포 측정 및 가상착의 적용 (Investigation of the body distribution of load pressure and virtual wear design according to the corset type harness)

  • 권미연;최솔아;김주혜
    • 한국의상디자인학회지
    • /
    • 제23권3호
    • /
    • pp.1-10
    • /
    • 2021
  • Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.

노년기여성의 배면만곡도 감소효과를 위한 의복디자인 연구 (A Study on the Cloth Design for Elderly Women to Mask Their Dorsal Curvature)

  • 김태영;이경희;박정순
    • 한국의류학회지
    • /
    • 제14권3호
    • /
    • pp.183-195
    • /
    • 1990
  • The author has studied the effect of clothes design to mask the dorsal curvature that is one of the commonest changes in elderly women. Body measurements including the body type and the status of dorsal curvature were perfor-med on 153 women of over 60 years of age, and then a body form to fit to the mean measure-ments was made to evaluate the effects of various designs to it. With 31 pattern designs modified by changing in their slash lines and gathers using darts, the diminishing effect of the rounded back were evaluated by means of sensory test. The results of this study can be summarized as follows: I . Results from the body measurements 1) The mean body type in elderly women was that of obesity. 2) With the advancement of age, the angle to indicate the degree of dorsal curvature as well as the angle to indicate the posture are increased. II . Concerning to the clothes design to diminish the shape of dorsal curvature 1) Among the designs by the position of darts, the basic pattern (Fig. 5-1-(1)) showed the best effect to mask the shape of dorsal curvature. 2) Out of the applied designs of princess lines, that in which the slash line is pointing toward the shoulder point (Fig. 5-2-(1)) seemed to be most effective. 3) What has angled princess line (Fig. 5-3-(1)) had the most diminishing effect among the waist darts and armhole princess lines. 4) Among the V-shaped designs, the slashed at the shoulder point (Fig. 5-4-(1)) had the best effect to lessen the shape of the dorsal cuuature. 5) Wider angle yoke had better effect to the narrow angle one among the designs with straight yoke, and that with downward direction (Fig. 5-5-(1)) showed the best effect. 6) Between straight wide angle yoke and curved yoke, that of curved one with downward direction (Fig. 5-6-(1)) had better effect as far as the masking effect of dorsal curvature is concerned. 7) Gathers around the neck showed better effect to those around the shoulder, and the more amount of gathers (Fig. 5-7-(1)), there was better effect. 8) The design with midline gathers at the level of horizontal slash line of armhole (Fig. 5-8-(1)) showed better effect to that with seperated gathers. 9) In case of design with gathers at the horizontal line of armhole, it showed the better effect with less amount of gathers in midline ones, but with more amount in the side ones. 10) Considering all 7 different designs with better effect in covering the shape of dorsal curvature, it was evident that the design with gathers was far better than the design with application of slash lines.

  • PDF

Development of a Bodice Prototype Drafting Method for 20s Plus-size Women

  • Cha, Su-Joung
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권4호
    • /
    • pp.99-110
    • /
    • 2022
  • 본 연구는 일반적인 체형의 여성과 구분되는 특징을 가지고 있는 플러스 사이즈 여성을 대상으로 상반신 의류 제작의 기초가 되는 보디스 원형을 개발하고자 한다. 이를 통하여 비만 인구의 증가로 시장이 활성화되고 있는 플러스 사이즈 여성 의류 개발의 기초가 되는 자료를 제공하고자 한다. 1차 외관 및 의복압 평가를 통해 옆목점 이동, 뒤진동다트 분량 추가, 앞처짐분 추가 등의 패턴을 수정하였다. 2차 평가를 통해 옆선 수직, 뒤중심선 목부분 들뜸, 뒤진동다트 분량 추가 등을 수정하였다. 3차 평가를 통해서는 옆선의 수직 분량 추가, 뒤진동다트 분량 추가를 통해 최종 패턴 제도법을 개발하였다. 20대 플러스 사이즈 여성 체형의 경우 복부의 돌출로 옆선의 설정 및 밑단의 설정 방법에 일반 체형과 구별되는 제도법이 요구되었다. 본 연구는 20대 플러스 사이즈 여성의 체형에 적합한 보디스 원형 제도법을 제시하였다는 점에 그 의의가 있다. 후속 연구에서는 실제 의복 제작을 통한 착용감 평가가 이루어져야 할 것으로 생각된다.

종자내 아미노산 합성 조절 유전자에 관한 연구 (Amino Acid Biosynthesis and Gene Regulation in Seed)

  • 임용표;서미정;조수진;이정희;이효연
    • 한국식물학회:학술대회논문집
    • /
    • 한국식물학회 1996년도 제10회 식물생명공학심포지움 고등식물 발생생물학의 최근 진보
    • /
    • pp.61-74
    • /
    • 1996
  • Human and monogastric animals can not synthesize 10 out of the 20 amino asids and therefor need to obtain these from their diet. The plant seed is a major source of dietary protein. It is particular important in their study to increase nutritional quality of the seed storage proteins. The low contents of lysine, asparagine and threonenein various cereal seeds and of cystein and methionine. In legume seeds is due to the low proportions of these amino acids in the major storage proteins, we have tried to apply the three strategies; (1) mutagenesis and selection of specific amino acid analogue resistance, (2) cloning and expression study of lysine biosynthesis related gene, (3) transfomation of lysine rich soybean glycinin gene. The 5-methyltryptophan (5MT) resistant cell lines, SAR1, SAR2 and SAR3 were selected from anther derived callus of rice (Oryza sativa L. "Sasanishiki"). Among these selected cell lines, two (SAR1 and SAR3) were able to grow stably at 200 mg/L of 5MT. Analysis of the freed amino acids in callus shows that 5MT resistant cells (SAR3) accumulated free tryptophan at least up to 50 times higher than those that of the higher than of SAS. These results indicated that the 5MT resistant cell lines are useful in studies of amino acid biosynthesis. Tr75, a rice (Oryza sativa L., var. Sasanishiki) mutant resistant to 5MT was segregated from the progenies of its initial mutant line, TR1. The 5MT resistant of TR75 was inherited in the M8 generations as a single dominant nuclear gene. The content of free amino acids in the TR75 homozygous seeds increased approximately 1.5 to 2.0 fold compared to wild-type seeds. Especially, the contents of tryptophan, phenylalanine and aspartic acid were 5.0, 5.3 and 2.7 times higher than those of wild-type seeds, respectively. The content of lysine is significantly low in rice. The lysine is synthesized by a complex pathway that is predominantly regulated by feedback inhibition of several enzymes including asparginase, aspatate kinase, dihydrodipicolinat synthase, etc. For understanding the regulation mechanism of lysine synthesis in rice, we try to clone the lysine biosynthetic metabolism related gene, DHPS and asparaginase, from rice. We have isolated a rice DHPS genomic clone which contains an ORF of 1044 nucleotides (347 amino acids, Mr. 38, 381 daltons), an intron of 587 nucleotides and 5'and 3'-flanking regions by screening of rice genomic DNA library. Deduced amino acid sequence of mature peptide domain of GDHPS clone is highly conserved in monocot and dicot plants whereas that of transit peptide domain is extremely different depending on plant specie. Southern blot analysis indicated that GDHPS is located two copy gene in rice genome. The transcripts of a rice GDHPS were expressed in leaves and roots but not detected in callus tissues. The transcription level of GDHPS is much higher in leaves indicating enormous chloroplast development than roots. Genomic DNA clones for asparaginase genes were screened from the rice genomic library by using plaque hybridization technique. Twelve different genomic clones were isolated from first and second screening, and 8 of 12 clones were analyzed by restriction patterns and identified by Southern Blotting, Restriction enzyme digestion patterns and Southern blot analysis of 8 clones show the different pattern for asparaginase gene. Genomic Southern blot analysis from rice were done. It is estimated that rice has at least 2-3 copy of asparaginase gene. One of 8 positive clones was subcloned into the pBluescript SK(+) vector, and was constructed the physical map. For transformation of lysine rich storage protein into tobacco, soybean glycinin genes are transformed into tobacco. To examine whether glycinin could be stably accumulated in endosperm tissue, the glycinin cDNA was transcriptionally fused to an endosperm-specific promotor of the rice storage protein glutelin gene and then introduced into tobacco genomic via Agrobacterium-mediated transformation. Consequently the glycinin gene was expressed in a seed-and developmentally-specific manner in transgenic tobacco seeds. Glycinin were targeted to vacuole-derived protein bodies in the endosperm tissue and highly accumulated in the matrix region of many transgenic plant (1-4% of total seed proteins). Synthesized glycinin was processed into mature form, and assembled into a hexamer in a similar manner as the glycinin in soybean seed. Modified glycinin, in which 4 contiguous methionine residues were inserted at the variable regions corresponding to the C - teminal regions of the acidic and basic polypeptides, were also found to be accumulated similarly as in the normal glycinin. There was no apparent difference in the expression level, processing and targeting to protein bodies, or accumulation level between normal and modified glycinin. glycinin.

  • PDF

태백산맥 남부산지의 암설사면지형 (The Study on the Debris Slope Landform in the Southern Taebaek Mountains)

  • 전영귄
    • 대한지리학회지
    • /
    • 제28권2호
    • /
    • pp.77-98
    • /
    • 1993
  • 본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

  • PDF

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

압축성이 큰 지반에서 순간변위(충격)시험 해석을 위한 선형 커브피팅법(Linear Curve Fitting Methods)의 적용 (Application of Linear Curve Fitting Methods for Slug Test Analysis in Compressible Aquifer)

  • 최항석;이철호;웽텐바오
    • 한국지반공학회논문집
    • /
    • 제23권11호
    • /
    • pp.99-107
    • /
    • 2007
  • Hvorslev법이나 Bouwer and Rice법과 같은 선형 커브피팅법은 대수층의 현장 투수계수를 구하기 위해 실시하는 순간변위시험 혹은 순간충격시험(slug test) 결과를 효과적이고 간편하게 해석하도록 한다. 그러나, 대수층의 압축성이 클 경우, 순간변위시험의 결과가 반대수 그래프에서 선형적이지 않고 상향으로 오목한 곡선 형태를 갖게 되므로, 대수층의 압축성을 무시하는 기존의 선형 커브피팅법은 이런 경우에 그대로 적용하기 어렵다. 본 논문에서는 두 선형 커브피팅법을 부분 관통된 우물의 경우에 대하여 비교 분석하여 대부분의 경우에 Hvorslev법이 Bouwer and Rice법에 비하여 과다하게 현장 투수계수를 산정함을 보였다. 또한, 각기 다른 커브피팅 방법에 따른 순간변위시험 해석결과를 무차원 압축 매게변수(${\alpha}$)의 범위 0.001에서 1까지에 대하여 비교 분석하였다. 마지막으로, 압축성이 큰 대수층의 순간 변위시험 해석을 위하여 Chirlin의 방법을 부분 관통된 우물의 형상을 고려할 수 있도록 확장하여 수정된 선형 커브피팅법을 제시하였다. 제안된 방법의 현장 적용성을 검토하기 위해 빙적토 대수층에서 실시된 순간 변위시험 결과를 이용하여 사례분석을 하였다.

REMOTE SENSING AND GIS INTEGRATION FOR HOUSE MANAGEMENT

  • Wu, Mu-Lin;Wang, Yu-Ming;Wong, Deng-Ching;Chiou, Fu-Shen
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.551-554
    • /
    • 2006
  • House management is very important in water resource protection in order to provide sustainable drinking water for about four millions population in northern Taiwan. House management can be a simple job that can be done without any ingredient of remote sensing or geographic information systems. Remote sensing and GIS integration for house management can provide more efficient management prescription when land use enforcement, soil and water conservation, sewage management, garbage collection, and reforestation have to be managed simultaneously. The objective of this paper was to integrate remote sensing and GIS to manage houses in a water resource protection district. More than four thousand houses have been surveyed and created as a house data base. Site map of every single house and very detail information consisting of address, ownership, date of creation, building materials, acreages floor by floor, parcel information, and types of house condition. Some houses have their photos in different directions. One house has its own card consists these information and these attributes were created into a house data base. Site maps of all houses were created with the same coordinates system as parcel maps, topographic maps, sewage maps, and city planning maps. Visual Basic.NET, Visual C#.NET have been implemented to develop computer programs for house information inquiry and maps overlay among house maps and other GIS map layers. Remote sensing techniques have been implemented to generate the background information of a single house in the past 15 years. Digital orthophoto maps at a scale of 1:5000 overlay with house site maps are very useful in determination of a house was there or not for a given year. Satellite images if their resolutions good enough are also very useful in this type of daily government operations. The developed house management systems can work with commercial GIS software such as ArcView and ArcPad. Remote sensing provided image information of a single house whether it was there or not in a given year. GIS provided overlay and inquiry functions to automatically extract attributes of a given house by ownership, address, and so on when certain house management prescriptions have to be made by government agency. File format is the key component that makes remote sensing and GIS integration smoothly. The developed house management systems are user friendly and can be modified to meet needs encountered in a single task of a government technician.

  • PDF

여고생들의 연예인 모방유형에 따른 외모관리행동의 차이 - 교복변형, 헤어스타일, 화장을 중심으로 - (Appearance Management Activities of Female High School Students Through Star-Entertainer Imitation - School Uniform Modification, Hairstyle, and Makeup -)

  • 최나영
    • 한국가정과교육학회지
    • /
    • 제24권3호
    • /
    • pp.175-189
    • /
    • 2012
  • 본 연구는 여고생들의 연예인 모방유형에 따라 외모관리행동 즉, 교복 변형행동, 헤어스타일 관리행동, 화장 관리행동 등에 미치는 영향을 조사하였다. 이를 위해 전북에 거주하는 여자고등학생 379명의 데이터가 사용되었고 신뢰도분석, 요인분석, 군집분석, 일원배치분산분석, 교차분석을 사용하여 분석하였다. 본 연구를 통하여 전북지역 여고생들은 연예인 모방유형에 따라 적극적 수행형, 심리적 욕구형, 연예인 호감형으로 분류되었다. 연예인 모방행동과 모방욕구의 평균이 가장 높았던 적극적 수행형 여고생들은 교복변형 경험이 가장 높았으며, 드라마속 연예인이 입고 나오는 교복스타일을 따라해 보고 싶어하고, 연예인 교복스타일로 교복을 변형한 경험이 있는 등 연예인 교복스타일에 많은 영향을 받았다. 또한 최신 유행헤어스타일을 인식하고 연예인의 헤어스타일을 선호하는 등 헤어스타일 관리행동에 더 적극적이었다. 그리고 매일 기초화장을 하고, 화장법을 배우고 싶어하는 등 화장 관리행동에 더 적극적임을 알 수 있었다. 반면 연예인 모방 행동과 모방욕구의 평균이 가장 낮았던 연예인 호감형 여고생들은 교복변형행동, 헤어스타일 관리행동, 화장 관리행동 등에 소극적임을 알 수 있었다. 따라서 청소년에게 바람직한 매스미디어에 관한 체계적인 교육을 실시하고, 교사들은 청소년들에게 합리적인 모방활동을 할 수 있도록 교육한다면 의생활지도에 있어서 효율적인 교육성과를 거둘 수 있을 것으로 보인다.

  • PDF

Effect of Taxol Pre-treatment to In Vitro Matured Bovine Oocytes on Spindle Morphology and Embryonic Development Following Vitrification

  • Park, Sang-Hyoun;Yu, Il-Jeoung
    • 한국수정란이식학회지
    • /
    • 제23권4호
    • /
    • pp.269-274
    • /
    • 2008
  • The purpose of this study was to determine the effects of Taxol pre-treatment to in vitro matured bovine oocytes, and sucrose and trehalose added to vitrification solution on spindle morphology and embryonic development following cryopreservation. Bovine oocytes were collected from ovaries and matured in tissue culture medium 199 (TCM 199) supplemented with 10% Fetal Bovine Serum (FBS), 0.05ng/ml epidermal growth factor, 0.01 IU/ml luteinizing hormone and $1{\mu}g/ml$ estradiol for 22h in $39^{\circ}C$, 5% $CO_2$, TCM 199-HEPES containing 20% FBS was used as basic medium (BM) to prepare vitrification solution. Oocytes were pre-treated with $1\;{\mu}M$ Taxol in maturation medium for 15 min prior to vitrification. Oocytes were exposed to 1.6 M ethylene glycol (EG) and 1.3M dimethyl sulfoxide (DMSO) in BM and then were exposed to 3.2 M EG, 2.6 M DMSO and 0.5 M sucrose in BM or 3.2 M EG, 2.6 M DMSO and 0.5 M trehalose in BM. Oocytes with cumulus cells and oocytes without cumulus cells were considered as control 1 and control 2, respectively and held in TCM 199-HEPES at $39^{\circ}C$. Oocytes were frozen using modified solid surface vitrification and were stored in cryotubes in liquid nitrogen for more than 1 week. Frozen oocytes were thawed in TCM 199-HEPES containing 0.5 M, 0.25 M and 0.1 M sucrose in BM for 2 min, respectively or 0.5 M, 0.25 M and 0.1 M trehalose in BM for 2 min, respectively. Immunoflurorescence staining of oocytes was performed to assess spindle morphology and chromosome configuration of oocytes. The rates of cleavage and blastocyst were examined following in vitro fertilization. Normal spindle morphology rate of oocytes pre-treated with Taxol prior to vitrification was not higher than that of other vitrified groups. Taxol pre-treatment did not increase cleavage and blastocyst formation rates, although control groups showed significantly higher rates (p<0.05). Percentages of normal spindle and embryonic development were not significantly different among vitrified groups regardless of type of sugar. In conclusion, Taxol pre-treatment of oocytes before cryopreservation did not reduce the damage induced by vitrification and subsequently did not improve embryonic development following vitrification. Trehalose may be used as an alternative non-permeating cryoprotectant in vitrification solution.