• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.193-204
• /
• 2013

The growing logistics strategy of a company is to optimize their vehicle route scheduling in their supply chain system. It is very important to analyze for continuous pickups and delivery vehicle scheduling. This paper is a computational study to investigate the effectiveness of continuous pickups and delivery vehicle routing problems. These scheduling problems have 3 subproblems; Inbound Vehicle Routing Problem with Makespan and Pickup, Line-haul Network Problem, and Outbound Vehicle Routing Problem with Delivery. In this paper, we propose 5 heuristic Algorithms; Selecting Routing Node, Routing Scheduling, Determining Vehicle Type with Number and Quantity, and Modification Selecting Routing Node. We apply these Algorithms to S vehicle company. The results of computational experiments demonstrate that proposed methods perform well and have better solutions than other methods considering the basic time and due-date.

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2013

High performance plastic optical fiber (POF) $N{\times}N$ star couplers are implemented based on fusing and combining technology. A set of cladding-removed POFs are fused into a solid body by heating and pressing them together to form the transition region between the input and output sides. The operation principle of the proposed star coupler is explained based on ray optics. To demonstrate the performance of the device, $2{\times}2$, $4{\times}4$ and $6{\times}6$ type POF couplers were fabricated and characterized. Performances of the POF star couplers were evaluated in terms of the flatness of the coupling ratios and excess losses.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1107-1109
• /
• 1996

In this paper, we discuss the automatic recognition system of vehicle types and licence plate numbers using artificial neural networks, which will be used as vehicle identifier. We confine to expose the vehicle licence number for violating bus lane and stolen cars. Therefore, the vehicle height, width and distribution profile are used as the feature parameters of vehicle type. This system is composed of two parts: one is an image preprocessor of vehicle images and the other one is a pattern classifier by neural networks. The experimental results show that our method has good results for the recognition of vehicle types and numbers.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.13-20
• /
• 2009

RFIDs have been used a lot of control systems such as library and security efficiently. Unlawful parking control is one of them and it will bring a lot of merit. Especially, it can be used vehicles. If a vehicle comes to unlawful parking place, reader system read the tag of a vehicle. RFID reader confirm the vehicle and record current time at the same time send information related the vehicle to the server system. After, it can be activated. If the vehicle move from unlawful parking place, RFID reader record departed time. In this paper, we proposed a monitoring system for unlawful parking cars. Especially, it is certain that this proposed modelling is very efficient and correct.

• The Journal of Information Systems
• /
• v.12 no.1
• /
• pp.87-116
• /
• 2003

One of the important applications for business-to-business electronic commerce is in procurement and inventory management using electronic data interchange(EDI). Using online catalogs and approved supplier lists, firms can easily create requisitions and purchasing documents. The emerging trend in EDI technology is changed from VAN(Value Added Network) based EDI to XML based EDI. This paper intends to suggest a component-based XML/EDI system using Unified Modeling Language(UML), as an application system for automobile part industry. Applying component based XML/EDI systems designed with UML methodology, we analyzed the workflow and the document on procurement process between trading partners and implemented a prototype of efficient XML/EDI system, as a surrogate of existing VAN/EDI. The result of applying object-oriented CBD(Component Based Development) technique is to minimize the risk of life cycle and facilitate the reuse of software as mentioned to limitation of information engineering methodology. It enables the interoperability with corporate legacy systems such as ERP(Enterprise Resource Planning), SCM(Supply Chain Management). This system proposes a solution to apply analysis phase and design phase in implementation of XML/EDI system. The implementation of XML/EDI system using CBD shows the ease of use in software reuse and the interoperability with corporate internal information system. The purchasing department with XML/EDI system can electronically communicate purchase orders, delivery schedules to external suppliers and interoperate with other application systems.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.1-10
• /
• 2015

Automotive Theft has been an obstinate problem around the world. Design and manufacture of anti-theft systems have become more and more complex due to the rise in complexity of theft in the system. Most of the anti-theft systems available in the market, are the alarm types which audibly deter some thieves away but do not prevent one's car from being stolen and even are not good enough to meet the growing complexity of theft in the country. This paper presents a simple and an efficient anti-theft system which provides improved security by the use of efficient access mechanisms and immobilization systems. This security system can immobilise an automobile and its key auto systems through remote control when it is stolen. It hence deters thieves from committing the theft. It also effectively prevents stealing of key auto systems for reselling by introducing four layers of security features written in the form of firmware and embedded on the Electronic Control Units (ECUs). The particulars of system design and operation are defined in the paper. The experimental outcomes show that this system is practicable and the owner can steadily control his vehicle within a few seconds.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.184-192
• /
• 2006

Synthetic Aperture Radars(SAR) are used mainly for high-resolution imaging of the terrain. This paper describes the $16{\times}16$ array antenna designed for an X-band, automobile-based SAR(AutoSAR) system. This antenna has the structure of several layers such as radome, radiators, slots, feed network, and honeycomb cores. Each layer is adhesively bonded to meet different combination of structural and electrical design requirements. Using the Strip-Slot-Foam-Inverted-Patch(SSFIP) structure and honeycomb cores, a wide bandwidth and a structural hardness were achieved. Measurement results were compared with simulation results. It was observed that this antenna had a bandwidth of 1.7 GHz, side-lobe levels of less than -20 dB, half-power beamwidth of $5^{\circ}$ and $5^{\circ}$, and gains of 25.0 dBi. The observed results show that the designed array antenna will be applicable to the wideband SAR system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.156-169
• /
• 2016

The objective of this study is to investigate patent trends of Daegu city which tries to introduce environment friendly energy and to develop new technology or new industry sprung from technology convergence on smart decentralized energy technology and other technologies. After applying network analysis to corresponding groups of technology or industry convergence, strategy for future energy convergence industry is provided. Patent data applied in Daegu city area are used to obtain research goal. The technology which contains several IPC codes (IPC Co-occurrence) is considered as a convergence technology. Path finder network analysis is used for visualizing and grouping by using IPC codes. The analysis results categorized 13 groups in energy convergence industry and reclassified them into 3 cluster groups (Smart Energy Product Production Technology Group, Smart Energy Convergence Supply Technology Group, Smart Energy Indirect Application Technology Group) considering the technical characteristics and policy direction. Also, energy industry has evolved rapidly by technological convergence with other industries. Especially, it has been converged with IT industry, and there is a trend that energy industry will be converged with service industry and manufacturing industry such as textile, automobile parts, mechanics, and logistics by employing infrastructure as well as network. Based on the research results on core patent technology, convergence technology and inter-industry analysis, the direction of core technology research and development as well as evolution on decentralized energy industry is identified. By using research design and methodology in this study, the trend of convergence technology is investigated based on objective data (patent data). Above all, we can easily confirm the core technology in the local industry by analyzing the industrial competitiveness in the macro level. Based on this, we can identify convergence industry and technology by performing the technological convergence analysis in the micro level.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.3
• /
• pp.41-46
• /
• 2009

A new subway, line 9 linking Western and Eastern Seoul began its services for citizens between Gimpo airport and Gangnam area within 30 minutes by express transit service. Seoul Metro Line 9 Corporation plans to operate both local transit service which will stop at every station, and express transit service that will stop at several key stations including junctions. The passengers on line 9 will be able to transfer to lines 2, 3, 5, 8, Bundang and Incheon International Airport. The Line 9 is expected to disperse the demand for line 2, having the most number of subway users, and will provide passengers with less crowded travel. The new line will also help residents in southern Seoul outskirts and Gyeonggi provincial cities including Bundang vicinity, and Gangdong area commuters get better access to Gimpo and incheon Airports. The Corporation expects to transfer 560,000 passengers daily by the subway line 9. Seoul Development Institute conducted network reshuffle study for Seoul Metro system to sort out congestion problem due to its irrational line alignments and inconvenient transfer. Among several candidate plans of network reshuffling, the direct connection of line 9 with line 5 was chosen as a pilot study. The study found that direct connection of the 2 lines is essential for enhancing transit utility and reducing automobile commuters.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2542-2544
• /
• 2000

In this paper, CAN(Controller Area Network)is used to solve the wire harness problem in the outside mirror of automobile which has a lot of functions in narrow space. If the number of wires is reduced, it has benefits of lower product cost and maintenance. CAN was originally developed by the German company Robert Bosch for use in the car industry to provide a cost-effective communications bus for in car electronics and as alternative to expensive and cumbersome wiring looms. CAN controller is a serial communication protocol which efficiently supports distributed real-time control with a very high level of security. The communication between master CAN controller and slave CAN controller is realized and controller's performance is tested by experiment.