• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2234-2236
• /
• 2002

In this paper, realized an automation system that applies the automobile electromotive mirror using CAN(Controller Area Network : ISO l1898). CAN is being used mainly in ECUs (Electronic Control Units) connection of control system or automobile inside. And it has high reliability in the various network protocol. To be realized position system, Automobile Electro mirror, has a strong point that estabilishment e decrease and ease of maintenance it compare PPP(Point-to-point) method of existed. The realization composed of three portions. One Input Slave Con which accept a user's input, another Output Slave Co which drove it makes the motor of electromotive mirr other Master Controller which interfacing the two Controller. Automobile electromotive mirror realized time system that will be able to minize the delay t point of time user's input until output point of time mirror.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.614-620
• /
• 2006

Today the automobile has been changed from a mechanical system to an electronic control system fly the development of the electronic technology. In the automobile body, most of these electronic control devices are networked and managed fully by the CAN protocol. But, when a network system is overloaded, unexpected transmission delay for relative low priority objects occurs due to the static priority definition of the CAN protocol. To resolve this problem, this paper proposes a dynamic precedence queue mechanism that creates a queue for the low priority object and its relevant objects to be transmitted, which becomes urgent in an overloaded network system to keep the maximum allowable time delay. For the generated queue, the highest priority is assigned to transmit the queued objects within the shortest time. The mechanism is implemented in the logical link layer of CAN, which does not require any modification of the old CAN hardware. Effectiveness of the proposed mechanism is verified by the real experiments with an automobile network system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.468-471
• /
• 2005

The Air Quality Sensor(AQS), located near the fresh air inlet, serves to reduce the amount of pollution entering the vehicle cabin through the HVAC(heating, ventilating, and air conditioning) system by sending a signal to close the fresh air inlet door/ventilation flap when the vehicle enters a high pollution area. One chip sensor module which include above two sensing elements, humidity sensor and bad odor sensor was developed for AQS (air quality sensor) in automobile. With this sensor module, PIC microcontroller was designed with back propagation neural network to reduce detecting error when the motor vehicles pass through the dense fog area. The signal from neural network was modified to control the inlet of automobile and display the result or alarm the situation. One chip microcontroller, Atmega128L (ATmega Ltd., USA) was used. For the control and display. And our developed system can intelligently detect the bad odor when the motor vehicles pass through the polluted air zone such as cattle farm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.539-546
• /
• 2006

The Air Quality Sensor(AQS), located near the fresh air inlet, serves to reduce the amount of pollution entering the vehicle cabin through the HVAC(heating, ventilating, and air conditioning) system by sending a signal to close the fresh air inlet door/ventilation flap when the vehicle enters a high pollution area. The sensor module which includes two independent sensing elements for responding to diesel and gasoline exhaust gases, and temperature sensor and humidity sensor was designed for intelligent AQS in automobile. With this sensor module, AVR microcontroller was designed with back propagation neural network to a powerful gas/vapor pattern recognition when the motor vehicles pass a pollution area. Momentum back propagation algorithm was used in this study instead of normal backpropagation to reduce the teaming time of neural network. The signal from neural network was modified to control the inlet of automobile and display the result or alarm the situation in this study. One chip microcontroller, ATmega 128L(ATmega Ltd., USA) was used for the control and display. And our developed system can intelligently reduce the malfunction of AQS from the dampness of air or dense fog with the backpropagation neural network and the input sensor module with four sensing elements such as reducing gas sensing element, oxidizing gas sensing element, temperature sensing element and humidity sensing element.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5110-5116
• /
• 2011

In this paper, multiplexing automation system will be proposed for the automobile electromotive mirror using CAN(Controller Area Network) protocol which has been known that it has a high reliability on the signal in the various network protocols. To do this, a master controller and two (input/output) slave controllers (H/W) are being made and application layer (S/W) is being programmed for effective going and communicating between subsystems. The possibility of the effectiveness of application and control ability will be shown when the system has minimum electrical lines by testing the experimental systems which was made up of the automobile electromotive mirror.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1923-1930
• /
• 2012

'No-Automobile driving Day' is one of Special option of Automobile Insurance in Republic of Korea. It option is used a system for collect to automobile driving information. However, Its system gives discomfort to users of this system. A Discomfort of this system to users is the OBD device's(Personal Car Driving Check Device) installation. A frequent installation of this device provides this OBD device's breakage to the users of this system. In this paper, for a solve this problem, studied new system design to supplement the existing system using Smartphone and WPAN(Wireless Personal Area Network).

• Management & Information Systems Review
• /
• v.2
• /
• pp.335-354
• /
• 1998

In this study I construct CAN(Controller Area Network) for automobiles similar to LAN(Local Area Network) and build communication modules in the major part of an automobile to link several sub-systems. Since each station replaces the communication function of sub-systems and has various types of sensor, actuator, controller, and switch, every information about automobile's status is obtained from the network. The manufactured system showed a superior capability. The following is the contents of study. 1. The definition of communication packet through the analysis of CAN protocol. 2. The Design of modules using micro-controller 80C196CA. 3. The Network configuration.

• Journal of Distribution Research
• /
• v.7 no.1
• /
• pp.1-20
• /
• 2002

Many of logistics-related research in automobile industry has focused on inbound logistics and procurement. Research into outbound logistics is relatively few. As a starting research into outbound logistics in automobile industry, this paper examined its logistics network problems with three aspects - location strategy, inventory strategy and transportation strategy. We proposed alternatives of logistics network design resolution, and presented three practical scenarios based on those alternatives. Based on interview, on-site visit and internal data collection processes, we identified major domestic outbound logistics problems such as redundant logistics bases, inefficient delivery policy, insufficient inventory capacity, inventory stock quality deterioration, inefficient transportation system, and etc. In order to cope with those problems, we proposed such strategic alternatives as introduction of hub-and-spoke system, integration of logistics bases, introduction of (automatic) parking building, diversification of transportation mode, and etc. At the same time, we constructed three practically executable scenarios based on those ideas. The first is "Center Hub" scenario, the second is "Metropolitan Hub" scenario. The third and last scenario is "Regional Consolidation of Warehouses (distribution centers)".

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.1
• /
• pp.95-102
• /
• 2001

The design of automobile body assembly line is one of essential parts for improving the process performance. The major objective of this research is to develop a performance evaluation model for automobile assembly line using a closed queueing network(CQN) and simulation method. In this study we used a two-step approach to compute the performance of the assembly line : first, we used CQN model considering assembly line equipments and the line operating time under the assumption of no failure, and second we used a well-known simulator FACTOR/AIM. Finally we implemented this model on a K automobile company and we have shown the sample results of automobile body assembly line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.40-48
• /
• 2018

This paper proposes a license-plate recognition algorithm for automobile black-box image which is obtained from the camera moving with the automobile. The algorithm intends to increase the overall recognition-rate of the license-plate by increasing the Korean character recognition-rate using multi-stage neural network for automobile black-box image where there are many movements of the camera and variations of light intensity. The proposed algorithm separately recognizes the vowel and consonant of Korean characters of automobile license-plate. First, the first-stage neural network recognizes the vowels, and the recognized vowels are classified as vertical-vowels('ㅏ','ㅓ') and horizontal-vowels('ㅗ','ㅜ'). Then the consonant is classified by the second-stage neural networks for each vowel group. The simulation for automobile license-plate recognition is performed for the image obtained by a real black-box system, and the simulation results show the proposed algorithm provides the higher recognition-rate than the existing algorithms using a neural network.