• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.765-771
• /
• 2020

Automatic lubrication devices are applied in various fields, such as huge machinery, construction machinery or commercial vehicles, to lower maintenance costs and protect the devices. In addition, the automatic lubrication device reduces frequent component failures cause by friction and allows the machine to replace the lubricating oil replenishment work carried out by the manager. However, the automatic lubricating device used in large machinery or commercial vehicles is relatively large, containing a large amount of lubricant in the space to be lubricated. On the other hand, a smart factory, such as a home appliance or cosmetics factory, lacks space to install large automatic lubrication devices, and it is difficult to distribute electricity. Therefore, there is a need for an automatic lubrication device that can be used in various environments that require lubrication. In this paper, a small automatic lubrication device is proposed for smart factories that have changed parts of existing factories, such as electronics factories, to minimize friction arising from mechanical parts, etc. In particular, the structure of lubricating pumps and component parts that are the core of automatic lubrication devices was described so that they could be utilized in various fields. Finally, a test bed environment is established for the proposed automatic lubrication device to evaluate its performance and verify its applicability.

• Journal of Fashion Business
• /
• v.1 no.2
• /
• pp.46-54
• /
• 1997

The purpose of this study is to understand women's wear manufacturing industries. First, the study was to investigate the present production systems and how much the automatic facility are by comparing them. This study enhanced more efficient, stable, and suitable work line. This intern will direct the way in which automatic facilities will be created. Second, through this study on the general character of the inspectors, the ratio of impaired goods, and the reasons for unsatisfactory goods, I intended to find out a way to decrease the impaired goods and to produce competitive and high quality goods. The results of the survey can be summarized as follows; 1. The result of the research on the automatic industrial facilities shows that the majority of the factories (77.4%) are 40% below the automatic facility rate. The reasons for this according to order are that was a deficit in money, no reason for expensive machines, and lack of the technique and the number of workers required to handle the machines. 2. At this time, the most required equipments are shown according to its importance; automatic sewing machine, automatic cutting machine, automatic spreading machine, and finishing & pressing machine. So in the women's wear manufacturing industries, they think that they need more automatic cutting machine, automatic spreading machine in the cutting field rather than high price automatic machine in the sewing field such as pattern former, pocket welting, automatic sleeve connecting machine and automatic label connecting machine. 3. The result of the research in the goods quality shows that the average impaired rate is 12.7% at the first inspection. In addition the average rate for complete impaired rate is 1.52%. The line system shows that it has a impaired rate that is double the rate of the pair system. Because of this, the industries plan to combine the line system and pair system to create an improved and suitable production system which can boost the quality and productivity of the goods. 4. The fabric is the main point of the impaired goods. The factors of the impaired goods in manufacturing are the lack of mental abilities of the worker, impaired fabrics and a lack of cooperation in the working system. Furthermore, there is a lack of technique for new material. 5. To prohibit impaired goods in manufacturing, there need to be a way to educate the workers and to enhance the workers' mind on the productive goods. Also there need to increase in the investments of automatic production machines. Finally there need to be a standardized working line. Therefore, there need to be an improvement on the management of the production of goods, the development of technique and an increase in the education for the workers, with this there will be a decrease in impaired goods, and an increase in better quality of goods to enforce the domestic apparel industries.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.629-636
• /
• 2000

In this study, we investigated the characteristics of labor of water management and maintenance, water requirement, water quality(T-N, T-P, COD) in the paddy plot irrigated by pipeline with two types of hydrants: automatic and manual. The automatic hydrant have been introduced to the paddy field to save water and reduce the labor for water management. The automatic hydrant is automatically opened and closed according to the water depth of a paddy plot. The automatic hydrant generally developed more troubles than the manual hydrant. The water requirements are 2.7mm/d for the automatic hydrant plot and 17.6mm/d for the manual hydrant plot. The concentrations of pollutants in the two plots are higher in the ponded water than in the irrigation water and are highest after fertilizer application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.119-131
• /
• 1997

Ball type automatic balancer is used to reduce the vibration caused by unbalance of rotor. In this study, A analytic modeling of a front loaded washing machine with ball type automatic balancer has been suggested theoretically and ADAMS has been used to analyze the dynamic characteristics of automatic balancer. It is found from simulation and experimental results that the automatic balancer suppress the steady state vibration of the washing machine effectively. The test results match well with the simulation results of ADAMS, thereby the dynamic model of ADAMS can be used as virtual prototype to predict the vibration characteristics which could be changed by the modification of design variable and can reduce the design cycle sharply. To maximize the balancing effect of automatic balancer, the friction between balls and race and the deviation between geometric center and rotation center of drum need to be minimized and the optimum design for the stiffness of flange shaft and the angular acceleration of drum should be achieved.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.755-762
• /
• 2022

The existing electrical engineering design method and the dynamic objective function in the application process of automatic control system fail to meet the unbounded condition, which affects the control tracking accuracy. In order to improve the tracking control accuracy, this paper studies the electrical engineering design method based on neural network and the application of automatic control system. This paper analyzes the structure and working mechanism of electrical engineering automation control system by an automation control model with main control objectives. Following the analysis, an optimal solution of controllability design and fault-tolerant control is figured out. The automatic control power coefficient is distributed based on an ideal control effect of system. According to the distribution results, an automatic control algorithm is based on neural network for accurate control. The experimental results show that the electrical automation control method based on neural network can significantly reduce the control following error to 3.62%, improve the accuracy of the electrical automation tracking control, thus meeting the actual production needs of electrical engineering automation control system.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.72-79
• /
• 2003

This paper deals with the development of an interface program for automatic plate forming, which can exchange information between the heating line information generation program and the automatic heating apparatus. In this paper, the performance of the developed interface program has been verified from the view point of numerical position control. By applying the interface program to the operation of the automatic heating apparatus, an experiment of line heating has been conducted for several steel plate models. Based on the experimental results, a simplified relation to estimate angular distortion has keen derived as a natural characteristic of the present automatic heating apparatus. As a result of the present study, the prototype of the automatic plate forming system has been constructed, and its application to the real surface models found in the ship will be presented in the near future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1943-1949
• /
• 1997

In this paper, the analysis of the shift transient characteristics for the Ravigneaux type automatic transmission has been carried out using dynamic models of the automatic trnasmission. It is necessary to understand the overall system including multi-plate clutch, band brake, one way clutch, and planetary gears. The equations of motion are derived from the dynamic models of the automatic transmission. The GUI computer simulation program has been developed to analyze the shift transient characteristics of the vehicle equipped with the Ravigneaux type automatic transmission.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.80-83
• /
• 2001

In this study, we investigated irrigation effect for the paddy plot irrigated by pipeline with two types of hydrants: automatic and manual. The automatic hydrant have been introduced to the paddy field to save water and reduce the labor for water management. The automatic hydrant is automatically opened and closed according to the water depth of a paddy plot. The water management labor to close manual hydrant in the afternoon of every three days can be eliminated when we use the automatic hydrant. The water requirements for the automatic hydrant plot 3.26mm/d are much less than those for manual hydrant plot 9.99mm/d.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1226-1231
• /
• 2001

In this paper in order to estimate a frequency offset in the presence of the impulse noise, the kalman filter automatic frequency control has been presented and compare with some well-known automatic frequency control. The kalman filter automatic frequency control has shown its potential robustness against the impulsive noise, keeping a stable frequency acquisition performance among all the automatic frequency control considered, resulting in the reduction of the preamble length for training the automatic frequency control and the higher efficiency in transmission power.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.629-634
• /
• 2000

Dynamic behavior of an automatic dynamic balancer is analyzed by a theoretical approach. Using Lagrange's equation, we derive the non-linear equations of motion for an automatic dynamic balancer equipped in a rotor with the bending flexibility with respect to the rectangular coordinate. Considering the rotor bending flexibility we analyze out-of-plane vibrations as well as in-plane vibrations of the automatic dynamic balaner. The time responses are computed from the non-linear equations by using a time integration method. We also investigate the effect of rotor flexibility on the behavior of the automatic dynamic balancer