• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.14-22
• /
• 2016

Because fuses have many parts, human error can occur during visual inspections. This paper proposes an automatic ammunition test algorithm for preventing human error during an inspection. The automatic ammunition test algorithm consists of the following three steps. First, the image input and preprocessing step is where an inspection image is rotated using an image rotation algorithm and the image is converted to a binary image. Second, the inspection step of arming determines if the ammunition is armed using Masked Template Matching algorithm, etc. Third, the inspection step of the parts determines if the parts are omitted using an image searching algorithm, etc. The arming or parts omission of the fuse are detected efficiently using the ammunition automatic test algorithm. The ammunition automatic test algorithm is expected to help improve the safety and reliability of 40 mm grenade fuse.

• Korean Journal of Adult Nursing
• /
• v.14 no.1
• /
• pp.144-153
• /
• 2002

Purpose: The purpose of this study was to describe the premenstrual syndrome and the relationships among premenstrual syndrome, automatic thought, and perfectionism. Methods: The 164 subjects were selected from a nursing college in Tae-Jeon. The data were collected using the PAF, ATQ-N, and MPS from April 10th to May 10th, 2001. Results: The results of this study were as follows : 1. There was no significant difference in premenstrual syndrome due to menarche, duration of menstruation, and menstrual cycle, but significant difference in premenstrual syndrome due to amount of menstruation and regularity of menstrual cycle. 2. The subjects experienced mild premenstrual syndrome. The severe premenstrual syndromes above the mean were who subjects reported general physical discomfort, fatigue, low mood and loss of pleasure, lability and atypical depressive features, et. al., and those below the mean experienced hostility/anger, increased well-being, miscellaneous mood/behavior change, impulsive syndrome and miscellaneous physical changes, et. al. 3. The score of mean premenstrual syndrome was 236.55, that of automatic thought was 31.41 and that of perfectionism was 185.97. The premenstrual syndrome score was similar to those of other studies and subjects had low automatic thought and moderate perfectionism. 4. There were significant correlations among premenstrual syndrome, automatic thought, and perfectionism (P <. 001). 5. Automatic thought and perfectionism accounted for 17 percent of premenstrual syndrome. Conclusions: For future research, it was recommended that the study to identify major factors affecting premenstrual syndrome and the relationships between them with various subjects should be done and effective nursing intervention for premenstrual syndrome should be developed.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.276-283
• /
• 2019

The purpose of this study is to evaluate the usefulness of automatic exposure control (AEC) by analyzing entrance surface dose (ESD) and entropy on using automatic exposure and manual exposure. The experimental method was to measure the dose by placing a semiconductor dosimeter on the Rando Phantom for the Pelvis, Abdomen, Skull, and Chest regions. The DICOM file was simultaneously acquired and then entropy was analyzed by using Matlab. As a result, when using the automatic exposure control, dose of all sites was lower than manual exposure's dose and entropy was high. In addition, paired t-test was performed for each item and p<0.05 was found in each item. In conclusion, the use of automatic exposure control can be a useful method to contribute to the optimization of the exposure dose and the image quality by reducing the amount of unnecessary radiation amount and information loss that can occur in X-ray examination.

• Journal of Drive and Control
• /
• v.13 no.1
• /
• pp.18-26
• /
• 2016

This research is conducted to develop an automatic steering system for parallel parking, and the performance of the system was evaluated by parallel parking a conventional vehicle. The automatic steering system consisted of MDPS (motor driven power steering) to control steering, ESC (electronic stability control) to acquire wheel speed, ultrasonic sensors to recognize the parking space, and a controller to communicate and handle data. The parallel parking process using the automatic steering control consisted of parking space recognition, parking path generation, and parking path tracking. The path for parallel parking was generated based on a kinematic model of a conventional vehicle, and a PI controller was used to control the steering angle for path tracking. Parallel parking using the automatic steering control was conducted according to vehicle speed conditions. The results show that the errors on the x-axis and y-axis were below 0.54 m and 0.14 m, respectively, and the error on the steering angle was less than $1^{\circ}$. Therefore, it is possible to implement parallel parking using an automatic steering control system for conventional vehicles.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.37-40
• /
• 2014

Purpose For living donor liver transplantation, liver segmentation is difficult due to the variability of its shape across patients and similarity of the density of neighbor organs such as heart, stomach, kidney, and spleen. In this paper, we propose an automatic segmentation of the liver using multi-planar anatomy and deformable surface model in portal phase of abdominal contrast-enhanced CT images. Method Our method is composed of four main steps. First, the optimal liver volume is extracted by positional information of pelvis and rib and by separating lungs and heart from CT images. Second, anisotropic diffusing filtering and adaptive thresholding are used to segment the initial liver volume. Third, morphological opening and connected component labeling are applied to multiple planes for removing neighbor organs. Finally, deformable surface model and probability summation map are performed to refine a posterior liver surface and missing left robe in previous step. Results All experimental datasets were acquired on ten living donors using a SIEMENS CT system. Each image had a matrix size of $512{\times}512$ pixels with in-plane resolutions ranging from 0.54 to 0.70 mm. The slice spacing was 2.0 mm and the number of images per scan ranged from 136 to 229. For accuracy evaluation, the average symmetric surface distance (ASD) and the volume overlap error (VE) between automatic segmentation and manual segmentation by two radiologists are calculated. The ASD was $0.26{\pm}0.12mm$ for manual1 versus automatic and $0.24{\pm}0.09mm$ for manual2 versus automatic while that of inter-radiologists was $0.23{\pm}0.05mm$. The VE was $0.86{\pm}0.45%$ for manual1 versus automatic and $0.73{\pm}0.33%$ for manaual2 versus automatic while that of inter-radiologist was $0.76{\pm}0.21%$. Conclusion Our method can be used for the liver volumetry for the pre-surgery planning of living donor liver transplantation.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.225-233
• /
• 2013

The accuracy of the automatic NMO velocity analysis, which is used for an effective and objective NMO velocity analysis, is highly affected by the velocity resolution of the velocity spectrum. In this study, we have developed an automatic NMO velocity algorithm, where the velocity spectra are created using high-resolution bootstrapped differential semblance (BDS), and the velocity analysis on CMP gathers is performed in parallel with MPI. We also compared the velocity models from the developed automatic NMO velocity algorithm with high-resolution BDS to those from BDS. To verify the developed automatic velocity analysis module we created synthetic seismic data from a velocity model including horizon layers. We confirmed that the developed automatic velocity analysis module estimated velocity more accurately. In addition, NMO velocity which yielded a CMP stacked section, where the coherency of the events were improved, was estimated when the developed module was applied to a marine field data set.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2004

This paper deals with the automatic flight control system for an unmanned target drone which is operated by an army as an anti-air gun shooting training. By automation of unmanned target drone that is manually operated by external pilot, pilot can reduce workload and an army can reduce the budget. Most UAVs which are developed until today use high-cost sensors as AHRS and IMU to measure the attitude, but those are contradictory for the reduction of budget. This paper says the development of low-cost automatic flight control system which makes possible of automatic flight with low-cost sensors. We have developed the integrated automatic flight control system by integrating electricity module, switching module, monitoring module and RC receiver as an one module. We also prove the performance of automatic flight control system by flight test.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1992.03a
• /
• pp.92-93
• /
• 1992

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.702-708
• /
• 2016

The railway signaling system has evolved to maximize its safety and maintainability based on the experiences in the construction and operation of railway systems. The newly developed systems was established to cope with the changes in an operating environment. In the process of a transition to the new system, both the existing ATS (Automatic Train Stop) and new ATP/ATO (Automatic Train Protection/Automatic Train Operation) systems are operating simultaneously in parallel. In this situation, modifications of the conditions of the interlocking diagram and logic are necessarily required on the existing ATS systems due to the frequent improvements in signaling equipment. This paper reports the enhancement of safety and operational efficiency of the system through an improvement of the security and the interlocking conditions of the existing ATS systems. The independent display of signals for each track was ensured to avoid giving the effect of On/Off signals for the selected track on the opposite side, and the security was improved by adjusting the position and interlocking conditions. In addition, the increased traffic density of railway systems was achieved by removing the unnecessary conditions and detailed signal display, which resulted in enhanced operational efficiency.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.125-134
• /
• 2022

Due to the development of smartphone technology, as of 2020, 91.9% of people use the Internet[1] to frequently acquire information through websites and mobile apps. As the number of homepages in charge of providing information is increasing every year, the number of applications for web vulnerability diagnosis, which diagnoses the safety of homepages, is also increasing. In the existing web vulnerability check, the number of diagnostic personnel should increase in proportion to the number of homepages that need diagnosis because the diagnosticians manually test the homepages for vulnerabilities. In reality, however, there is a limit to securing a web vulnerability diagnosis manpower, and if the number of diagnosis manpower is increased, a lot of costs are incurred. To solve these problems, an automatic diagnosis tool is used to replace a part of the manual diagnosis. This paper explores a new method to expand the current automatic diagnosis range. In other words, automatic diagnosis possible items were derived by analyzing the impact of web vulnerability diagnosis items. Furthermore, automatic diagnosis identified possible items through comparative analysis of diagnosis results by performing manual and automatic diagnosis on the website in operation. In addition, it is possible to replace manual diagnosis for possible items, but not all vulnerability items, through the improvement of automatic diagnosis tools. This paper will explore some suggestions that can help improve plans to support and implement automatic diagnosis. Through this, it will be possible to contribute to the creation of a safe website operating environment by focusing on the parts that require precise diagnosis.