• Steel and Composite Structures
• /
• v.29 no.6
• /
• pp.771-783
• /
• 2018

In this paper, topology optimization (TO) is applied to find a new configuration for the perforated steel plate shear wall (PSPSW) based on the maximization of reaction forces as the objective function. An infill steel plate is introduced based on an experimental model for TO. The TO is conducted using the sensitivity analysis, the method of moving asymptotes and SIMP method. TO is done using a nonlinear analysis (geometry and material) considering the buckling. The final area of the optimized plate is equal to 50% of the infill plate. Three plate thicknesses and three length-to-height ratios are defined and their effects are investigated in the TO. It indicates the plate thickness has no significant impact on the optimization results. The nonlinear behavior of optimized plates under cyclic loading is studied and the strength, energy and fracture tendency of them are investigated. Also, four steel plates including infill plate, a plate with a central circle and two types of the multi-circle plate are introduced with equal plate volume for comparing with the results of the optimized plate.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.1
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.313-318
• /
• 2019

The purpose of this study is to investigate whether there is a difference in the incidence of the black circle border of iris(skin disease) according to the iris constitution. Iris was taken for 100 adults living in Seoul. Iris was photographed using the iris camera DV-2H, a blue focus development product. Statistical significance was tested by correlation analysis, and the occurrence of black circle border of iris was low negative correlation(p<0.01). As mentioned above, we know that the occurrence of black circle border of iris differs according to the iris constitution, and by using it actively, it will help health promotion about skin. There is a need to study the changes of iris in the cause of skin disease by using a blood test to analyze the cause of the skin disease in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.88-98
• /
• 1998

In many automatization applications, a rigid body is required to go forward and backward repeatedly through a set of given position/orientations precisely while a crank is rotated. Such a motion can be generated by 6 bar mechanism adding a dyad to a 4 bar mechanism. If this is the case for 3 position synthesis of the 4 bar mechanism, the feasible solution area for designing the 4 bar mechanism will be limited over the general solution area. This paper proposes a procedure to synthesize 4 bar mechanism to be used to generate the required motion. It is found that the only input crank of the 4 bar mechanism should be limited to satisfy the condition. And the feasible design area for the circle point/ center point of the input crank is identified so that design of the undesired mechanism could be avoided. The method is tested and the results are shown.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.121-129
• /
• 1993

Plane strain punch stretching test (PSST) was developed to evaluate stamping formability of sheet materials. In this test, the rectangular specimen of sheet material is uniformly stretched up to fracture by raising a specially designed punch to certainly assure plane strain stretching deformation along the longitudinal direction of the specimen. The stamping formability was evaluated by limit punch height(LPH) in plane strain punch stretching test compared to limit dome height(LDH) in hemispherical punch stretching test. LPH-value in PSST well ranks the stamping formability of various material and correlates with press performance. Moreover by using ultrasonic thickness gauge the plane strain intercept-limit plane strain(FLCo)-in forming limit curve can be accurately determined from thickness measurement around the fracture area. The FLCo derived from thickness measurement well correlates with the results from circle grid analysis for the deformed circle grid marked on the surface of the specimen.

• The Research Journal of the Costume Culture
• /
• v.7 no.5
• /
• pp.80-92
• /
• 1999

The objectives of this study were to investigate the relation between personality(activity, emotional stability, and dominance) and clothing design preferences, and to examine the differences of clothing design preferences according to demographic variables of men. Subjects for the study were 255 male white-collar workers ranging in ages from twenties to fifties, in Seoul and Kwangju City, Korea. The men with higher activity of personality preferred the double jacket with 4 buttons, the combination of light color jacket and dark trousers, glen check pattern jacket, herringbone pattern jacket, light beige color dress shirts. The higher the emotional stability, the higher the preferences on diverse patterns such as fine stripe, plaid, hound\`s-tooth check, and small check pattern. The men with higher dominance preferred dark blue color suit, glen check pattern suit, and necktie of red circle, and disliked the necktie of gray circle. The men in their 20\`s and 30\`s liked the single jacket with 3 buttons, the suit of fine stripe and the necktie of gray circle more among three income groups. The higher the men\`s age and income were, the more they liked the conservative style such as a single jacket with 2 buttons. The men who reside in Seoul liked the suit of gray circle, the jacket and trousers of same color, the patternless jacket, and the patternless suit more than the men in Kwangju. Therefore, the men in methropolitan area preferred conservative clothing image. Fine stripe pattern and patternless materials were preferred when men wore jacket and trousers of same color, while glen check pattern was preferred as the pattern of jacket when jacket and trousers of different color. Male white-collar worker liked single jacket more than double jacket, and preferred the dark blue color suit and necktie, patternless suit, fine stripe suit, and the pale blue dress shirts generally. The present findings provide that the personality of male has influence on the clothing design preferences, and it is possible to infer men\`s personality by their attire.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.138-143
• /
• 2000

In order to maintain the faith and accuracy with precision of machinery, it is recently required the precise comprehension about approach which is appeared in the contact area between two bodies, because approach affects the static stiffness and dynamic characteristic of contact area. This study applied H. Hertz's circle contact area theory as much lower measuring force. It is measured approach influenced by various factors which were concerned with contact errors like material, form of two bodies, using calibration tester. As a result, the following conclusion can be obtained. 1) The approach appears greatly in order of carbon steel(SM20C), aluminum(A601-T6) and high density polyethylene(5305E) 2) The approach appears in order of concave, disc, convex form, in the ration of contact area size by the difference of curvature.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.295-298
• /
• 2004

Situation to develop Kyonggi Province area to universal tourist attraction area keeping in step with national large size event holding such as sun of Korean visit with opening a port of the In-chon International airport, the world ceramics Expo, World Cup was made up. Growth possibility is big to culture tourism resources and representative tourist resort of the Korea that use view of nature photon circle properly such as ceramics that target area possesses. Area development plan through growth possibility should be arranged to international ceramics production complex and distribution complex. Therefore, plan analyzing future district theme establishment and strength in priority via past and present of target area.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.153-160
• /
• 2016

OBJECTIVES : The objective of this study is to develop a traffic accident model of a roundabout based on the type of land use. METHODS : The traffic accident data from 2010 to 2014 were collected from the "traffic accident analysis system (TAAS)" data set of the Road Traffic Authority. A multiple linear regression model was utilized in this study to analyze the accidents based on the type of land use. Variables such as geometry and traffic volume were used to develop the accident models based on the type of land use. RESULTS : The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents is rejected. Second, four accident models based on the type of land use have been developed, which are statistically significant (high $R^2$ values). Finally, the total entering and circulating volumes, area of the central island, number of speed breakers, mean number of entry lanes, diameter of the inscribed circle, mean width of the entry lane, area of the roundabout, bus stops, and number of circulatory roadways are analyzed to see how they affect the accident for each type of land use. CONCLUSIONS : The development of the accident models based on the type of land use has revealed that the accident factors at a roundabout are different for each case. Thus, more speed breakers in commercial areas and an inscribed circle of proper diameter in commercial and residential areas are determined to be important for reducing the number of accidents. Additionally, expanding the width of the entry lanes, decreasing the area of the roundabouts in residential areas, and reducing the conflict factors such as bus stops in green spaces are determined to be important.

• Journal of the Korean Institute of Rural Architecture
• /
• v.2 no.2
• /
• pp.1-10
• /
• 2000

The traditional farm houses in Yongdong area of Kangwon province have a different spatial structure from those of the other areas because of the characteristics of the climatic, geographic and sociocultural circumstances between the Taebaek mountains and the East Sea. So the purpose of this study is aimed at grasping how the spatial features of traditional farm houses in Yongdong area have been different in each regional circle. The plans of traditional farm houses of this region which are four types - ㅡ typed house without floor, ㅡ typed house with floor, ㄱ typed house without floor, ㄱ typed house with floor - show very similar but different space arrangements.