• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.52-59
• /
• 2008

The objective of this study is to develop an automatic object changer unit to improve processing problems existed in the conventional horizontal machining center. To achieve this goal, this study designed a horizontal transfer as the second project continued to the first project that designed a upward and downward traverse unit. A horizontal traverse unit shows a symmetric structure and consists of frame, which consists of four unit tools, motor and reducer, which are fixed at a frame, operation unit with pinions, first traverse unit, and second traverse unit. Constraint conditions based on the operation mechanism with these elements were configured and obtained following results after modeling a model for a traverse motor. In the kinematic expression of sliding motion with one degree of freedom, the sliding motion is constrained. Also, the rack 3 installed at a frame is used to configure possible kinematic constraint conditions of the rack 2 according to the rolling motion of the pinion 2 in the first traverse unit. In addition, the moment of inertia that is a type of kinetic energy in a converted horizontal traverse unit in the side of the reducer can be applied to introduce the moment of inertia of a converted horizontal traverse unit in the side of the reducer by using the sum of kinetic energy in the rack and pinion, which is a part of the horizontal traverse unit. Also, the equation of motion of the converted upward and downward traverse unit in the side of the motor using the equation of motion of the motor. Furthermore, the horizontal traverse unit predetermines the mass of the first and second traverse unit and applied load including the radius and reduction ratio of the pitch circle in the pinion 1 and applied load to the rack 2. Then, a proper motor can be determined using several parameters in the upward and downward traverse unit in order to verify such predetermined specifications. In future studies later this study, a simulation that verifies the results of the previous two stages of studies using a finite element method.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.488-492
• /
• 2002

The purpose of this study was to evaluate the effectiveness of plasma arc curing (PAC) unit for composite and compomer curing. To compare its effectiveness with conventional quartz tungsten halogen (QTH) light curing unit, the polymerization shrinkage rates and amounts of three composites (Z100, Z250, Synergy Duo Shade) and one compomer, that had been light cured by PAC unit or QTH unit, was compared using a custome made linometer. The measurement of polymerization shrinkage was peformed after polymerization with either QTH unit or PAC unit. In case of curing with the PAC unit, the composite was light cured with Apollo 95E for 6s, the power density of which was recorded as 1350 mW/$\textrm{cm}^2$ by Coltolux Light Meter. For light curing with QTH unit, the composite was light cured for 30s with the XL2500, the power density of which was recorded as 800 mW/$\textrm{cm}^2$ by Coltolux Light Meter. The amount of linear polymerization shrinkage was recorded in the computer every 0.5s for 60s. Ten measurements were made for each material. The amount of linear polymerization shrinkage for each material in 10s and 60s which were cured with PAC or QTH unit were compared with t test. The amount of polymerization shrinkage in the tested materials were compared with 1way ANOVA with Duncan's multiple range test. As for the amounts of polymerization shrinkage in 60s, there was no difference between PAC unit and QTH unit in Z250 and Synergy Duo Shade. In Z100 and Dyract AP, it was lower when it was cured with PAC unit than when it was cured with QTH unit (p<0.05). As for the amounts of polymerization shrinkage in 10s, there was no difference between PAC unit and QTH unit in Z100 and Dyract AP. The amounts of polymerization shrinkage was significantly higher when it was cured with PAC unit in Z250 and Synergy Duo Shade (p<0.05). The amounts of polymerization shrinkage in the tested materials when they were cured with QTH unit were Z250 (6.6um) < Z100 (9.3um), Dyract AP (9.7um) < Synergy Duo Shade (11.2um) (p<0.05). The amount of polymerization shrinkage when the materials were cured with PAC unit were Dyract AP (5.6um) < Z100 (8.1um), Z250(7.0um) < Synergy Duo Shade (11.2um) (p<0.05).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.204-205
• /
• 2020

Construction Standard Unit Price is the unit price calculated based on the market price for work items in construction projects that have already been conducted. It is used as basic data for calculating the budget price of public construction projects. In the Construction Standard Unit Price Book implemented in the second half of 2020, there are 1,810 types of unit prices. Since 2017, 100-150 construction standard unit prices have been revised semiannually (on January 1 and July 1 of each year) through Construction Site Surveys. Other work items have been set based on the rate of inflation during the corresponding period. Later in 2020, this procedure was changed, with on-site survey period extended to one year to strengthen the construction standard unit price investigation. The revisions previous announced during the second half of the year were changed only to reflect the price inflation rates. With such changes in the revisions to construction standard unit prices, one important issue that was raised: The timing of announcing the revisions during the second half of the year (reflecting the price inflation rates). The market unit wage, which is the unit price standard of labor cost that takes up a large part of the construction cost, is announced in January and September. The figures announced in September is reflected on the construction standard unit price four months later in January, but the market unit wage announced in January is reflected only six months after in July, which causes a timing issue. As such, the current study analyzed problems rising from the changed timing of the announcements of the construction standard unit price during the second half of the year, in addition to analyzing their impact on public construction projects.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2221-2229
• /
• 2020

After the Fukushima Daiichi nuclear power plant (NPP) accident, level 3 probabilistic safety assessment (PSA) has emerged as an important task in order to assess the risk level of the multi-unit NPPs in a single nuclear site. Accurate calculation of the radionuclide concentrations and exposure doses to the public is required if a nuclear site has multi-unit NPPs and large number of people live near NPPs. So, there has been a great need to develop a new method or procedure for the fast and accurate offsite consequence calculation for the multi-unit NPP accident analysis. Since the multi-unit level 3 PSA is being currently performed assuming that all the NPPs are located at the same position such as a center of mass (COM) or base NPP position, radionuclide concentrations or exposure doses near NPPs can be drastically distorted depending on the locations, multi-unit NPP alignment, and the wind direction. In order to overcome this disadvantage of the COM method, the idea of a new multiple location (ML) method was proposed and implemented into a new tool MURCC (multi-unit radiological consequence calculator). Furthermore, the MURCC code was further improved for the multi-unit level 3 PSA that has the arbitrary number of multi-unit NPPs. The objectives of this study are to (1) qualitatively and quantitatively compare COM and ML methods, and (2) demonstrate the strength and efficiency of the ML method. The strength of the ML method was demonstrated by the applications to the multi-unit long-term station blackout (LTSBO) accidents at the four-unit Vogtle NPPs. Thus, it is strongly recommended that this ML method be employed for the offsite consequence analysis of the multi-unit NPP accidents.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.259-261
• /
• 2000

본 연구는 사료내 인분해효소 phytase을 첨가하여 곡류내 유기태인의 이용성을 최대화하고 인의 배설량을 최소화하므로서 저공해성 산란계 사료 개발에 기초자료로서 활용하는데 목적이 있다. 부화 후 64주령된 갈색 하이라인 24수(평균체중 1.9kg, 산란율 78.4%)를 공시하였다. 대조구는 옥수수-대두박 위주로 배합된 사료, 처리구는 대조구 사료에 각각 phytase를 200 unit/kg, 400 unit/kg 그리고 600 unit/kg 첨가한 구로서 4처리 3반복, 반복당 2수씩 완전임의 배치하였다. 건물과 질소 이용률을 보면 처리간의 차이는 보이지 않았다(P>0.05). 광물질 중 회분과 칼슘의 경우 phytase를 200 unit을 첨가한 구에서 가장 높은 이용률을 보였다(P<0.05). 인의 이용률은 phytase를 600 unit 첨가한 구가 57.64%로 다른 처리구보다 이용률이 높은 것으로 나타났다(P<0.05). 칼슘의 섭취량과 배설량을 고려한 결과 칼슘의 축적량은 phytase를 200 unit와 400 unit 첨가한 구가 대조구와 phytase를 600 unit 첨가한 구보다 높았다(P<0.05). 산란계에 대한 각각의 인의 섭취량을 보면 phytase를 600 unit 첨가한 구가 대조구, 200 unit 첨가한 구, 400 unit 첨가한 구보다 많은 양을 섭취하였으나(P<0.05), 인의 배설량에는 별다른 차이가 없었다(P>0.05). 그로 인해 인의 축적량 또한 phytase를 600 unit 첨가한 구가 다른 처리구에 비해 많이 축적되었다(P<0.05). 혈중 칼슘의 함량은 phytase를 400 unit 첨가한 구와 600 unit 첨가한 구, 대조구간에는 서로 유의적인 차이가 없었고, phytase를 200 unit 첨가한 구보다 그 함량이 높게 나타났다(P<0.05). 결론적으로 산란계 사료에 phytase를 첨가할 때 환경문제를 야기시킬 수 있는 인의 배설량을 감소시키고 값비싼 무기태 인의 일부를 대체하는데 크게 기여할 수 있으리라 사료된다.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.447-457
• /
• 2017

This study derived the unit of industrial water usage reflecting the latest industry trends. Available for establishing plans such as the master plan for water supply system and analyzed changes in the basic unit by a comparison with the current basic unit values. This study analyzed 4,038 samples with a sampling error of less than 1.5 % at the 95 % confidence level after removing outliers according to a log-normal distribution. As a result, the unit of industrial water usage per site area in the whole manufacturing industry was 7.11 m3/1,000m2/d. The ten industrial categories (C10, C13, C20, C21, C22, C25, C27, C30, C32, C33) showed a similar unit value compared to before, and the four industrials categories (C11, C17, C22, C31) showed a more unit value than before. With regard to the nine industrial categories (C14, C15, C16, C18, C19, C24, C26, C28, C29), the unit value decreased. Cases that companies examined before were the same as the companies examined in this study were analyzed. The result that the changes in the unit industrial water usage were reasonable was obtained. However, in some industrial categories (C17, C14, C24, C29), the unit value was changed by a small number of companies with large-scale water use or unit value of sampling had a large deviation. It was considered necessary to survey them periodically. The unit of industrial water usage derived by the survey in this study reflects the current industrial trends in 2016. Water use in manufacturing companies has continuously changed by the development of manufacturing technologies and simplification of manufacturing processes. In order to deal with this, it is considered necessary to survey the usage of industrial water periodically from a long-term perspective.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1199-1209
• /
• 2018

After the Fukushima-Daiichi accident in 2011, the multi-unit risk, i.e., the risk due to several nuclear power plants (NPPs) in a site has become an important issue in several countries such as Korea, Canada, and China. However, the multi-unit risk has been discussed for a long time in the nuclear community before the Fukushima-Daiichi nuclear accident occurred. The regulatory authorities around the world and the international organizations had proposed requirements or guidelines to reduce the multi-unit risk. The concerns regarding the multi-unit risk can be summarized in the following three questions: How much the accident of an NPP in a site affects the safety of other NPPs in the same site? What is the total risk of a site with many NPPs? Will the risk of the simultaneous accidents at several NPPs in a site such as the Fukushima Daiichi accident be low enough? The multi-unit risk assessment (MURA) in an integrated framework is a practical approach to obtain the answers for the above questions. Even though there were few studies to assess the multi-unit risk before the Fukushima-Daiichi nuclear accident, there are still several issues to be resolved to perform the complete MURA. This article aims to provide an overview of the multi-unit risk issues and its assessment. We discuss the several critical issues in the current MURA to get useful insights regarding the multi-unit risk with the current state art of probabilistic safety assessment (PSA) technologies. Also, the qualitative answers for the above questions are addressed.

• Journal of the Korean housing association
• /
• v.23 no.4
• /
• pp.41-48
• /
• 2012

The purpose of the study, approaching from the aspect of the construction technologies, is to determine the architectural techniques of traditional wood architects in existence, through which the systems and techniques that create the inherent characteristics of Korean Architecture are clarified. With understanding traditional construction system and focusing on the fact that built environment results from the consistent standards and technologies of architects, this study inquires into the systematic standard and its formation that present in the process of planning for the overall scale and shape of a building from the following (four) perspectives. The study determines the characteristics of '間(Kan)' (unit; fundamental unit that measures Korean traditional houses) and the methods of columns disposition of which the '間 (Kan)' is made up. Once the necessary spaces are decided according to the size of a building, then floor plans are drawn with the standard unit, '間(Kan)'. The '間(Kan)', as a modular unit, is not only composing the floor plans, but also functioning as an Area unit, Space unit and Structural unit. Composition of '間(Kan)' varies with disposition of columns, and therefore multiform of floor and spaces are created. In this study, the '間(Kan)', as a standard unit, is used in the form of specific size and area, and it is demonstrated how the floor plans are developed by organizing the columns in accordance with the spaces requested.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.33 no.4
• /
• pp.27-47
• /
• 2022

The purpose of the study is to develop a unit catalog system that can be linked with the curriculum. As for the research method, first, unit subject words were extracted through the analysis of middle school curriculum and science textbooks in all grades. Based on this, we designed a unit catalog system that has a unit book catalog by connecting books related to the unit topic of the subject, an index word catalog that organizes unit subject words into index words, and a grade and school level linked subject linked to the unit topic as a subsystem. Using the Notion program, a unit catalog system was implemented on the web using a middle school science unit 1 as a sample. To evaluate the system, experiments and surveys were conducted targeting students, and very positive results were shown in terms of satisfaction with the system and intention to use it in the future. Meanwhile, this study was limited to middle school science departments, but it was proposed to expand the application to all grades and subjects.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.853-858
• /
• 2011

Soybean-based food items have been developed as common fermented side dish sauces in South Korea, Japan, and China. Each of these countries, however, has its own fermentation method, including a microorganism-based fermentation process, the mixing of ingredients, the fermentation process, and the mixing of starch. The purpose of this study was to determine the quality characteristics of the commercial product. Fourteen kinds of rice soybean paste (Korea, 2 Japan, 12) were prepared, and their physiochemical properties (ammonium nitrogen, amino nitrogen, amylase, protease, and reducing-sugar contents) were analyzed. JRD-1 was found to contain the highest amount of amino-type nitrogen (426.45 mg%) while KRD-2 showed 316.10 mg%. For the protease activities, the following results were obtained: JRD-9, 695.10 unit/g JRD-11, 671.45 unit/g and JRD-5, 665.03 unit/g. As for the amylase activities, the results that were obtained were JRD-7, 53.65 unit/g JRD-8, 50.71 unit/g KRD-1, 46.52 unit/g JRD-1, 46.29 unit/g and JRD-11, 33.61 unit/g. This research provided information for the quality characteristics of commercial rice soybean paste.