• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1209-1215
• /
• 2014

The Uniform Geometrical Theory of Diffraction(UTD) is an effective technique to analyze the radio wave by ray-based calculation of the diffraction coefficient and the reflection coefficient. In this paper, user body shadowing based on the UTD is investigated when the user is close to the mobile device. Two cases are introduced. One is that the user is calling with the mobile attached to the ear(Head Model). The other is that the mobile is located about 15cm away from the user's chest(Chest Model) Radiation Model and Scattering Model are applied to these cases presenting which model is applicable.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.901-905
• /
• 2000

An elliptical ogive head for a generic missile is proposed to reduce its detectable probability from aground defense radar. Numerical RCS results of a generic missile with an elliptical ogive head are evaluated using the GTD/UTD (Geometrical Theory of Diffraction/uniform GTD). The results are compared with those of a cylindrical ogive head. In the sense of aerodynamics, the performance evaluation of an elliptical ogive head for a generic missile should be followed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.85-93
• /
• 1996

The far-zone scattered field patterns of a hyperbolic reflector antenna are analyzed by using uniform geometrical theory of diffraction(UTD). The main objective of this paper is to obtain the higher order diffraction contributions which provide the continuity over the shadow boundaries of the first order solution. to obtain the scattered magnetic field characteristics, the scattered field components of the secodn-order diffraction, diffraction-reflection, diffraction-reflection-diffraction terms are added to the result of the previous research. The results of the present research are compared to those of the first order solution and the method of moments. One can observe the improvemtn of the current approach over the first order solution. also, the results of the present method agree very well with those of the moment methods especially in the transition regions near the first order diffraction shadow boundaries.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.263-266
• /
• 2000

An elliptical ogive head for a generic missile is proposed to reduce its detectable probability from a ground defense radar. Numerical RCS results of a generic missile with an elliptical ogive head are evaluated using the GTD/UTD (Geometrical Theory of Diffraction/Uniform GTD). The results are compared with those of a cylindrical ogive head. In the sense of aerodynamics, the Performance evaluation of an elliptical ogive head for a generic missile should be followed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.19-24
• /
• 1992

In this paper, a high frequency method is developed which combines the uniform Geometrical Theory of Diffraction(GTD) and the Aperture Integration(AI) to analyze electromagnetic plane wave scattering by a perfectly-conducting, open-ended, semi-infinite parallel plate waveguide with a uniform layer of absorbing material on its inner wall, and with a slanted planar termination inside. In this method, first, the field of an arbitary point inside the paraller plate waveguide is computed by the GTD. Second, the field scattered into exterior region by the waveguide is found using the equivalent current, which can be obtaind from the aperture field of the waveguide and using the AI. Numerical results based on this GTD method are presented and compared with those based on the mode matching method.

• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.175-181
• /
• 2018

The array patterns of a patch array antenna were calculated using an active element pattern (AEP) method that considers ground edge effects. The classical equivalent radiation model of the patch antenna, which is characterized by two radiating slots, was adopted, and the AEPs that include mutual coupling were precisely calculated using full-wave simulated S-parameters. To improve the accuracy of the calculation, the edge diffraction of a ground plane was incorporated into AEP using the uniform geometrical theory of diffraction. The array patterns were then calculated on the basis of the computed AEPs. The array patterns obtained through the conventional AEP approach and the AEP method that takes ground edge effects into account were compared with the findings derived through full-wave simulations conducted using a High Frequency Structure Simulator (HFSS) and FEKO software. Results showed that the array patterns calculated using the proposed AEP method are more accurate than those derived using the conventional AEP technique, especially under a small number of array elements or under increased steering angles.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.79-88
• /
• 1995

A subreflector of an offset dual reflecor antenna system mounted on satelite is analyzed by Uniform Geometrical Theory of Diffraction(UTD). In order to get the total electric field at an observation point, the reflected field and the diffracted fields obtained by UTD are summed. The reflected point and the diffracted points which have to satisfy nonlinear equations are obtained by numerical methods. The numerical results show taht diffracted fields eliminate the discontinuity of reflected fields at the shadow boundary. To show the validity of our results, the field pattern of the symmetric hyperboloidal reflector is computed and compared with S. W. Lee et al.'s results. At various obsevation angles, radiation patterns of offset ellipsoidal subreflectors offseted by a circular corn and by an elliptic corn are obrained, repectivelly.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.106-113
• /
• 1995

The radiation characteristics of the subreflector of a shaped dual offset reflector antenna are analyzed by the uniform theory of diffraction(UTD). The discrete shaped subreflector profile is transformed into an analytic function by the global interpolation. To obtain the first and the second derivative terms on the surface, the local interpolation method is used. The reflection point needed for the geometrical optics(GO) is found by using the multi-dimensional function minimizing algorithm. The radiation pattern of a Gregorian type shaped subreflector is presented. The characteristics of the radiation patterns for various feed edge taperings and frequencies are examined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.412-418
• /
• 1999

The scattering characteristics of a prime-focus offset-parabolic antenna are analyzed using UTD. First, ray tracing method is used to locate the shadow boundaries, and then UTD is utilized to evalute the far-zone scattered magnetic field pattern. The field components included in the UTD analysis are the reflected, edge diffracted and creeping waves. The effects of circular caps attached to both edges of a prime-focus offset-parabolic antenna are investigated by comparing the scattered magnetic field patterns with those of a knife edge parabolic reflector.