• 논리연구
• /
• 제21권3호
• /
• pp.321-352
• /
• 2018

본 논문의 목표는 공시적 인식 규범인 주요 원리와 통시적 인식규범인 조건화 사이의 관계를 명시적으로 밝혀내는 것이다. 이를 위해, 나는 먼저 2절에서 주요 원리와 조건화의 여러 형태들을 정식화할 것이다. 그리고 3절에서 주요 원리와 조건화는 상호 보완적이라는 것을 논증할 것이다. 이 상호보완적 관계는 두 가지 방향에서 제시된다. 첫 번째는 조건화에 의한 주요 원리의 보완이며, 두 번째는 주요 원리에 의한 조건화의 보완이다. 첫 번째 보완관계는 조건화를 이용해 신념도를 갱신하는 경우, 특정한 형태의 주요 원리만을 만족시킨다면 모든 형태의 주요 원리를 만족시킬 수 있다는 것을 의미하며, 두 번째 보완 관계는 언제나 주요 원리를 만족하는 경우, 모든 신념도를 조건화를 통해 갱신하기 위해서는 일부 신념도만을 조건화를 통해서 갱신하는 것으로 충분하다는 것이다. 이 결과, 주요 원리와 조건화가 꽤 밀접한 관련이 있다는 것이 밝혀질 것이다.

• 천문학논총
• /
• 제32권1호
• /
• pp.209-211
• /
• 2017

We performed Principle Component Analysis (PCA) over 264 galaxies in the IRAS Revised Bright Galaxy Sample (Sanders et al., 2003) using 12, 25, 60 and $100{\mu}m$ flux data observed by IRAS and 9, 18, 65, 90 and $140{\mu}m$ flux data observed by AKARI. We found that (i)the first principle component was largely contributed by infrared to visible flux ratio, (ii)the second principal component was largely contributed by the flux ratio between IRAS and AKARI, (iii)the third principle component was largely contributed by infrared colors.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제10권3호
• /
• pp.79-84
• /
• 2021

고차원의 데이터를 처리하기 위해서는 데이터의 성질을 유지하면서 특징을 잘 반영할 수 있는 특징 추출 방법이 필요하다. 주성분분석 방법은 고차원 데이터에 포함된 정보를 저차원의 데이터로 변환하여 원래 데이터의 변수 수보다 적은 수의 변수로 고차원 데이터를 표현 할 수 있는 방법으로서 데이터의 특징 추출을 위한 대표적인 방법이다. 본 연구에서는 데이터가 고차원인 경우 데이터 특징 추출을 위한 주성분 분석에 있어서 주성분 변수 선정 시 적응적 상관도를 기반으로 한 주성분 분석 방법을 제안한다. 제안하는 방법은 입력 데이터간의 상관 관계를 기반으로 상관도를 적응적으로 반영하여 데이터의 주성분을 분석함으로써 다른 여러 변수에 중복적으로 상관도가 높은 변수와 주성분을 유도하는데 연관성이 적은 변수를 주성분 변수 후보 대상에서 제외시키고자 한다. 고유벡터 계수 값에 의한 주성분 위계를 분석하고 위계가 낮은 주성분이 변수로 선정이 되는 것을 막고 또한 상관 분석을 통하여 데이터의 중복 발생이 데이터 편향을 유도하는 것을 최소화하 하고자 한다. 이를 통하여 주성분 변수 선정 시 데이터 편향성의 영향을 줄임으로써 실제 데이터의 특징을 잘 나타내는 주성분 변수를 선정하는 방법을 제안하고자 한다.

• 수산경영론집
• /
• 제14권2호
• /
• pp.1-14
• /
• 1983

This paper considers a classification of the 88 islands located at Kyong-nam area in Korea, using by examples of 12 components of the islands. By means of principal component analysis 2 principle components were extracted, which explained a total of 73.7% of the variance. Using an eigen variable criterion (λ>1), no further principle components were discussed. Principal component 1 and 2 explained 63.4% and 10.3% of the total variance respectively, The representation of the unrelated factor scores along the first and second principal axes produced a new information with respect to the classification of the islands. Based upon the representation, 88 islands were classified into 6 groups i. e. A, B, C, D, E, and F according to similarity of the components among them in this paper. The "Group F" belongs to a miscellaneous assortment that does not fit into the logical category. category.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.243-249
• /
• 1999

Specificity of catches has been analyzed to japanese tuna purse seine A principle component analysis was used to improve the efficiency of fishing and increase sustainable production and productivity of Korean tuna purse seine.The result are as follows;From the principal component analysis of the fish catches, the first principal component(Z1) to promote principal component score was skipjack Kastsuwonus Pelamis, LINNAEUS and yellowfin tuna Thunnus Albacares, BONNATERRE (Small : smaller than 10kg) and proportion was 86.8% of total. The second principal component(Z2) to increase principal component score was yellowfin tuna (Large : larger than 10kg) and proportion was 9.5%.On the other hand, fish operating that have caught skipjack and yellowfin tuna (Small and Larger) was not so much. Fish catches for one species raised volume of the catches while catches for multi-species decreased it since principal composition score for one species and both species together has been increased.Fish school could be divided into three groups of schools each of which was associated with drift objects, payaho and ship, school associated with shark, whale and porpoise and school of breezing, feeding and jumping from proportion of principal component analysis for fish catches of school types. However, the biological pattern is different among school associated with ship, payaho and school associated with drift objects for analysis eigen vector. School associated with ship, payaho and school associated with drifting object associated is judged as school which be assembled to vessel and drifted log temporary.

• Journal of the Korean Statistical Society
• /
• 제24권2호
• /
• pp.407-417
• /
• 1995

The h-plot is a graphical technique for displaying the structure of one population's variance-covariance matrix. This follows the mathematical algorithem of the principle component biplot based on the singular value decomposition. But it is known that the singular value decomposition is not resistant, i.e., it is very sensitive to small changes in the input data. In this article, since the mathematical algorithm of the h-plot is equivalent to that of principal component biplot of Choi and Huh (1994), we derive the resistant h-plot.

• 대한수학회논문집
• /
• 제29권1호
• /
• pp.141-153
• /
• 2014

In this article, we apply the weak maximum principle in order to obtain a suitable characterization of the complete linearWeingarten hypersurfaces immersed in locally symmetric Riemannian manifold $N^{n+1}$. Under the assumption that the mean curvature attains its maximum and supposing an appropriated restriction on the norm of the traceless part of the second fundamental form, we prove that such a hypersurface must be either totally umbilical or hypersurface is an isoparametric hypersurface with two distinct principal curvatures one of which is simple.

• Communications for Statistical Applications and Methods
• /
• 제24권2호
• /
• pp.143-154
• /
• 2017

A variable selection method based on probabilistic principal component analysis (PCA) using penalized likelihood method is proposed. The proposed method is a two-step variable reduction method. The first step is based on the probabilistic principal component idea to identify principle components. The penalty function is used to identify important variables in each component. We then build a model on the original data space instead of building on the rotated data space through latent variables (principal components) because the proposed method achieves the goal of dimension reduction through identifying important observed variables. Consequently, the proposed method is of more practical use. The proposed estimators perform as the oracle procedure and are root-n consistent with a proper choice of regularization parameters. The proposed method can be successfully applied to high-dimensional PCA problems with a relatively large portion of irrelevant variables included in the data set. It is straightforward to extend our likelihood method in handling problems with missing observations using EM algorithms. Further, it could be effectively applied in cases where some data vectors exhibit one or more missing values at random.

• 한국태양에너지학회 논문집
• /
• 제39권3호
• /
• pp.67-79
• /
• 2019

The reliable Typical Meteorological Year (TMY) data, sometimes called Test Reference Year (TRY) data, are necessary in the feasibility study of renewable energy installation as well as zero energy building. In Korea, there are available TMY data; TMY from Korea Institute of Energy Research (KIER), TRY from the Korean Solar Energy Society (KSES) and TRY from Passive House Institute Korea (PHIKO). This study aims at examining their characteristics by using Principle Component Analysis (PCA) at six ground observing stations. First step is to investigate the annual averages of meteorological elements from TMY data and their standard deviations. Then, PCA is done to find which principle components are derived from different TMY data. Temperature and solar irradiance are determined as the main principle component of TMY data produced by KIER and KSES at all stations whereas TRY data from PHIKO does not show similar result from those by KIER and KSES.

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.379-392
• /
• 2015

A number of acceleration-based damage detection methods have been developed but they have not been widely applied in engineering practices because the acceleration response is insensitive to minor damage of civil structures. In this article, a damage detection approach using the long-gauge strain sensing technology and the principle component analysis technology is proposed. The Long gauge FBG sensor has its special merit for damage detection by measuring the averaged strain over a long-gauge length, and it can be connected each other to make a distributed sensor network for monitoring the large-scale civil infrastructure. A new damage index is defined by performing the principle component analyses of the long-gauge strains measured from the intact and damaged structures respectively. Advantages of the long gauge sensing and the principle component analysis technologies guarantee the effectiveness for structural damage localization. Examples of a simple supported beam and a steel stringer bridge have been investigated to illustrate the successful applications of the proposed method for structural damage detection.