• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.263-267
• /
• 2015

Stakeholders of a construction project expect cost savings through fast and accurate cost analysis by performing BIM-based quantity take-off (BQT). However, authors have observed that there can be discrepancies in the results of BQT depending on the level of development (LOD) and modeling methods. In addition, since quantity take-off methods are different depending on the construction work items, the combination of LOD, modeling methods of BIM, features of construction work items can cause serious overestimate or underestimate in BQT results. It is necessary to identify what kind of problems can happen and how those problems can be avoided in various construction work items, since the discrepancy of quantity take-off results has great impact on not only cost analysis but also the determination of contract amount and it can cause claims, poor construction quality, cost overruns, and many others later in the construction project. Therefore, this paper focuses the identification of issues and problems of BQT at each construction work item level based on two categorizations of structural works and interior works.

• International Journal of Computer Science & Network Security
• /
• v.23 no.11
• /
• pp.73-76
• /
• 2023

We introduce DCNN and DRAE appraoches for compression of medical videos, in order to decrease file size and storage requirements, there is an increasing need for medical video compression nowadays. Using a lossy compression technique, a higher compression ratio can be attained, but information will be lost and possible diagnostic mistakes may follow. The requirement to store medical video in lossless format results from this. The aim of utilizing a lossless compression tool is to maximize compression because the traditional lossless compression technique yields a poor compression ratio. The temporal and spatial redundancy seen in video sequences can be successfully utilized by the proposed DCNN and DRAE encoding. This paper describes the lossless encoding mode and shows how a compression ratio greater than 2 (2:1) can be achieved.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.2 no.4
• /
• pp.9-25
• /
• 2014

The successful implementation of various Enterprise Resource Planning (ERP) systems has provoked considerable interest in this subject over the last few years. The senior management, especially in large corporations have been attracted to look at new information technology and how to leverage it for corporate survival and to gain competitive advantage in volatile business environment. Although there is no shortage of positive reports on the success of ERP installations, many companies have invested millions of dollars in this direction with little to show for its success. Since many of the ERP failures today can be attributed to inadequate planning and poor execution in the implementation and closure of projects. The aim of this article is to offer some solutions to avert potential pitfalls in ERP implementation.

• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2005

The traditional method of manipulation of knots and degrees gives poor quality of surface, if compatibility of input curves is not good enough. In this work, a new algorithm of multiple refitting of curves has been developed using minimum energy based formulation to get compatible curves for skinning. The present technique first reduces the number of control points and gives smoother surface for given accuracy and the surface obtained is then skinned by compatible curves. This technique is very useful to reduce data size when a large number of data have to be handled. Energy based technique is suitable for approximating the missing data. The volumetric information can also be obtained from the surface data for analysis.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.326-331
• /
• 1990

In the vector-controlled induction machine drive, mechanical sensors restrict the wide applications of high performance AC drives. So in resent years, many papers have been presented which doesn't need mechanical sensors, named by sensorless vector control. But sensorless control has a few serious problem, one of which Is poor speed estimation in case of incorrect rotor resistance (Rr) information. This paper describes the stator flux orientation speed control strategy with the speed estimation algorithm. and the method of adapting Rr change due to thermal heating. By proposed method. We can acquire precise speed estimation and higher performance.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.318-321
• /
• 2003

In case, sensor system performs where it is difficult to access physically and it is in the poor environment, it is limited to communicate by using wire and installing power module in sensor system. In this paper, it suggests how information is obtained from telemetry sensor by means of inductive coupling without battery. Comparing with the telemetry sensor system of inductive coupling by the power supply, this system estimates the capacitance of sensor with high precision in using RLSE, not the process of modulation and demodulation. In order to activate this system, inductive model is used and in case of time variant parameter, telemetry sensor system which has got high rate in accuracy is implemented by using the forgetting factor.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.635-640
• /
• 2016

Tunnel field-effect transistor (TFET) is a promising candidate for the next-generation electron device. However, technical issues remain for their practical application: poor current drivability, shor-tchannel effect and ambipolar behavior. We propose herein a novel recessed-channel TFET (RTFET) with the asymmetric source and drain. The specific design parameters are determined by technology computer-aided design (TCAD) simulation for high on-current and low S. The designed RTFET provides ${\sim}446{\times}$ higher on-current than a conventional planar TFET. And, its average value of the S is 63 mV/dec.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.334-338
• /
• 2000

One of the major drawbacks of the existing facility layout methods is that most of them were developed based on pre-defined cost functions, and therefore fail to cope with the dynamic aspects of modern manufacturing systems. Another drawback is that due to the poor representation capability of the block diagrams, they are not able to convey the sufficient information needed by facility designers. In this paper, a system for solving facility layout problem considering these matters in cellular manufacturing environment is proposed and implemented using GA approach with embedded simulation module and virtual reality technologies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.185-189
• /
• 2002

Flexible displays such as plastic based LCDs and organic light-emitting diodes for mobile communication devices have been researched and developed at KETI in KOREA since 1997. The Plastic film substrate has so poor thermal tolerance and non-rigidness that the fabrication of active devices and panel assembly have to perform at low temperature and pressure. In addition, high thermal expansion of the substrate is also a serious problem for reliable metallic film deposition. In this paper, we investigated particularly on the fundamental characteristics of various plastic substrates and then, suggested novel methods that improve the fabrication processes of plastic LCD panel. In order to maintain stable substrate surface and uniform cell gap during panel assembly, we utilized newly-invented iii and vacuum chuck. Electro-optical characteristics of fabricated plastic LCD are better than or equivalent to those of typical glass based LCDs though it is thinner, lighter-weight and more robust.

• Proceedings of the KSPS conference
• /
• 2003.10a
• /
• pp.109-112
• /
• 2003

In real time packetized voice applications, missing frames is a major source of voice quality degradation. Thus packet loss concealment(PLC) algorithms are needed to guarantee the QoS of the VoIP. Still current speech codecs for VoIP work poor when consecutive packet losses are issued. In this paper, we proposed a new PLC algorithm for the G.729 codec. Our algorithm works better especially when the consecutive packet loss occurs mainly because it adopts an adaptive gain controller utilizing the number of missing packet information combined with a fixed codebook vector estimation algorithm and LPC bandwidth expansion.