• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.49-56
• /
• 2011

In this study a novel cogeneration system driven by low-temperature sources at a temperature level below $190^{\circ}C$ is investigated by first and second laws of thermodynamics. The system consists of Organic Rankine Cycle(ORC) and an additional heat generation as a parallel circuit. Seven working fluids of R143a, R22, R134a, R152a, $iC_4H_{10}$(isobutane), $C_4H_{10}$(butane), and R123a are considered in this work. Maximum mass flow rate of a working fluid relative to that of the source fluid and optimum turbine inlet pressure are considered to extract maximum power from the source. Results show that due to a combined heat and power generation, both the efficiencies by first and second laws can be significantly increased in comparison to a power generation, however, the second law efficiency is more resonable in the investigation of cogeneration systems. Results also show that the working fluid for the maximum system efficiency depends on the source temperature.

• Health Policy and Management
• /
• v.23 no.4
• /
• pp.376-386
• /
• 2013

Purpose: The purpose of study is to estimate the number of chronic disease patients and medical care expenditure at the time baby-boomers belong to 65 years old aging population, and compare with current 65 year-old aging population. Methods: Analysis method used an estimating formula devised by the researcher and estimated the number of chronic disease patients and medical care expenditure of each generation. Results: When comparing the estimated number of chronic diseases patients of each generation, 40.6% of the first generation, 76.4% of the second generation, 95.2% of third generation are expected to get chronic disease. When comparing each generation's total medical care expenditure, based on the estimated number of chronic diseases patients of each generation, the second generation( 1,206,251,224 thousand won) showed higher than other generation. This study compared the number of chronic disease patients and medical care expenditure between the second generation of the elderly and current elder generation. As a result, the second generation patients was higher than the fourth generation in high blood pressure, diabetes, psychological and behavioral disorder, and neurological diseases whereas the fourth generation is only high the number of patients in heart disease. As for total medical care expenditure, the second generation paid more in high blood pressure, psychological and behavioral disorder while the fourth generation in neurological disease and heart disease. Conclusion: It is desired that considering the number of chronic disease patients and medical care expenditure of baby boomers accounting for 14.6% of total population, in-depth follow-up study is carried out that inquires into what are issues with a current chronic disease management project, what business is needed in order to manage these issues, and how to fund to cover increasing medical care expenditure.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.89-105
• /
• 2008

So far, most of research on automated test data generation(ATDG) deals with programs without pointers. Recently, few works hove been done on ATDG in the presence of pointers, but they ore path-oriented techniques which require the specification of on entire program path to be tested or a program to be executed. This paper presents a new technique for generating test data even without specifying a program path completely. The presented technique is a static technique which transforms the test data generation problem into a SAT(SATisfiability) problem and makes advantage of SAT solvers for ATDG. For the ends, we transform a program under test into Alloy which is the first-order relational logic and then produce test data via Alloy analyzer.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.108-117
• /
• 2006

This paper focus on power development options for remote islands. Recently, in accordance with progress in distributed generation technologies including renewable energy sources, many options are possible as power development option for island. At first we estimate generation cost by generation technology then recommend and suggest some countermeasures and implementation for institutional improvement.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.239-247
• /
• 2006

This paper is to propose new features and models for process innovation after classifying in three categories ; conventional six sigma, lean six sigma and 3rd generation six sigma. First considering two project types which are bottom-up and tod-down, DMAIC process is linked up with QC story 15 steps. Secondly, I present Koreanized lean six sigma model using Japanese production technology and principles. Lastly, this paper also depicts a new 3rd generation six sigma model utilizing MBNQA management quality system.

• Korean journal of applied entomology
• /
• v.24 no.1 s.62
• /
• pp.1-6
• /
• 1985

The data on the striped rice, borer populations, collected in the four years from 1973 to 1976, was reanalyzed to study the characteristics in the aggregation pattern of the insect larvae in the paddy fields. The distribution pattern of the larvae was well fitted to the negative binomial model in both the first and the second generation. With reference to the Green's coefficient of dispersion estimated, the aggregation of the larvae was categorized into three phases: initial high aggregation, changing, and dispersed stable phase. Except the changing phase, each phase in each generation could be defined by a common k. The phase-change was initiated by the larval dispersal between hills of the rice plants: the larvae of the third stage and those of the fifth stage, for the first and second generation, respectively. The characteristics of the aggregation pattern were stable in the second generation. In the first genaration, the pattern was more or less variable, indicating that the life system of the insect in the first generation was more susceptible to the variations of the external physical factors than that in the second generation.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.357-367
• /
• 2017

Electricity generation in Korea mainly depends on thermal power and nuclear power. Especially the coal power has led to the increase in $CO_2$ emissions. This paper intends to analyze the current status of $CO_2$ emissions from electricity generation in Korea during the period 1990~2016, and apply the logarithmic mean Divisia index (LMDI) technique to find the nature of the factors influencing the changes in $CO_2$ emissions. The main results as follows: first, $CO_2$ emission from electricity generation has increased by $165.9MtCO_2$ during the period of analysis. Coal products is the main fuel type for thermal power generation, which accounts about 73% $CO_2$ emissions from electricity generation. Secondly, the increase of real GDP is the most important contributor to increase $CO_2$ emissions from electricity generation. The carbon intensity and the electricity intensity also affected the increase in $CO_2$ emission, but the energy intensity effect and the dependency of thermal power effect play the dominant role in decreasing $CO_2$ emissions.

• Journal of Information Technology Services
• /
• v.9 no.4
• /
• pp.243-259
• /
• 2010

It is expected that the next generation mobile communication system will be a service-driven developed system capable to realize the human-centric mobile convergence services. and it is different from the technology-driven development approach of the second and the third generation mobile communication systems. As a preliminary research work on such service-driven system development approach for the next generation mobile communication system. we developed the scenario based service analysis process (2SAP) framework to derive core service technologies and functionalities. In this paper. we propose the next generation mobile convergence service business model creation methodology based on research results of the 2SAP framework. To achieve this goal, we first establish a service model contains several components such as infrastructures. operations. and provision of services that are indispensible for providing next generation mobile services. Then, the next generation mobile services and its corresponding business models can be created by adding service and value flows to the developed service model after defining necessary components of business model including actors, their relationships, and roles.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.775-777
• /
• 2005

In this paper, effects of the subsidy in the electricity market on the market equilibrium are analyzed. The generation competition markets are considered as the basic market structure. The market equilibrium with Cournot game model is derived, first. Then, the variation of Nash equilibrium is investigated when the subsidies to generation companies are provided. The market equilibrium with the subsidy in the electricity market, which is equivalent to the subgame perfect equilibrium, is analytically derived using Stackelberg game model and backward induction method. From this, how the provisions of subsidy to generation companies can affect the strategic behaviors of the generation companies and corresponding market equilibrium are explored, in this paper. Numerical examples are provided to illustrate the basic idea of this paper.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.3
• /
• pp.1-15
• /
• 2000

In this paper, we propose a practical cut generation method based on the Chvatal-Gomory procedure for the (0, 1)-Knapsack problem with a variable capacity. For a given set N of n items each of which has a positive integral weight and a facility of positive integral capacity, a feasible solution of the problem is defined as a subset S of N along with the number of facilities that can satisfy the sum of weights of all the items in S. We first derive a class of valid inequalities for the problem using Chvatal-Gomory procedure, then analyze the associated separation problem. Based on the results, we develop an affective cut generation method. We then analyze the theoretical strength of the inequalities which can be generated by the proposed cut generation method. Preliminary computational results are also presented which show the effectiveness of the proposed cut generation method.