• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1611-1615
• /
• 2009

We designed new anthracene-based host material to increase color purity as well as device efficiency. The new blue host, 9,10-bis(2,4-dimethylphenyl)anthracene (BDA), has highly twisted structure and wide band gap due to ortho interaction between anthracene and introduced 2,4-dimethylphenyl substituents. BDA exhibited deep blue fluorescence in solution (${\lambda}_{max}$ = 410 nm) and in solid state (${\lambda}_{max}$ = 429 nm), respectively, with the wide optical band gap (E = 3.12 eV). Blue-light-emitting OLEDs using obtained host and 2% Flu-DPAN as emitter showed 8 cd/A of high efficiency as well as high color purity [CIE coordinates = (0.15, 015)].

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.583-586
• /
• 1999

In this paper, the wavelet transform is performed in the input 256$\times$256 color image and decomposes a image into low-pass and high-pass components. Since the high-pass band contains the components of three directions, edges are detected by combining three parts. After finding the position of face using the histogram of the edge component, a face region in low-pass band is cut off. Since RGB color image is sensitively affected by luminances, the image of low pass component is normalized, and a facial region is detected using face color informations. As the wavelet transform decomposes the detected face region into three layer, the dimension of input image is reduced. In this paper, we use the 3000 images of 10 persons, and KL transform is applied in order to classify face vectors effectively. FCM(Fuzzy C-Means) algorithm classifies face vectors with similar features into the same cluster. In this case, the number of cluster is equal to that of person, and the mean vector of each cluster is used as a codebook. We verify the system performance of the proposed algorithm by the experiments. The recognition rates of learning images and testing image is computed using correlation coefficient and Euclidean distance.

• Animal Systematics, Evolution and Diversity
• /
• 제33권2호
• /
• pp.123-130
• /
• 2017

The family Geometridae, which is one of the most species-rich taxa of Lepidoptera, includes more than 23,000 species worldwide and over 800 species in South Korea. Herein, we record six species of Geometridae for the first time in Korea. Jodis urosticta and Jodis amamiensis can be characterized by their greenish wings and strongly dentate ante- and postmedial lines on the fore and hindwings. These species can also be separated by the shape of the valva of the male genitalia. Pelagodes antiguadraria can be characterized by their greenish wings, whitish medial bands on the forewing and whitish postmedial line on the hindwing. Brabira kasaii can be characterized by the thick grayish band-shaped central fascia of their fore- and hindwings. Sauris marginepunctata can be characterized by the greenish ground color of the forewing, the dark ochreous medial bands and subterminal line and the grayish hindwing. Philereme vetulata can be characterized by their dark brownish wing color and the band-shaped central fascia of the forewing, as well as the medially projected postmedial line of the hindwing. Echthrocollix minuta can be characterized by their pale grayish wing color, brownish postmedial and subterminal lines and large discal dot.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.93-97
• /
• 2014

In this study, a cobalt sulfate ceramic coating was sintered on various clays at $1250^{\circ}C$. The specimen characteristics were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM), TG-DTA, UV-vis spectrophotometer, and HRDPM. The ceramic coating had a constant thickness of thousands ${\mu}m$, and the surface was confirmed to be densely fused. Other new compounds were produced by the cobalt sulfate sintering process and reactions. These compounds were a $CoAl_2O_4$ phase, $Co_2SiO_4$ phase, anorthite($CaAl_2Si_2O_8$) phase, and $FeAl_2O_4$ phase, respectively. UV properties of the coated specimen were investigated, celadon clay specimen in 530-550 nm band is showing a dark gray color. The white clay and white mix clay specimen in 460-500 nm band is showing a blue color. The cobalt-aluminate($CoAl_2O_4$) spinel and the cobalt-silicate olivine($Co_2SiO_4$) were the strongest of the ceramic pigments, producing a very pure, navy blue color.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1091-1094
• /
• 2004

High-luminous efficiency full-color emissions in photoluminescence (PL) were obtained in $GdVO_4$ phosphor thin films co-doped with various amounts of Eu, Er and/or Tm and postannealed at approximately 1000$^{\circ}C$. The $GdVO_4$:Eu,Er,Tm phosphor thin films were deposited on thick $BaTiO_3$ ceramic sheets by r.f. magnetron sputtering using powder targets and postannealed in an air atmosphere. The rare earth (RE) content (RE/(Gd+V+RE) atomic ratio) in the oxide phosphor thin films was varied in the range from 0.1 to 2 at.%. It was found that the excitation of $GdVO_4$:Eu.Er,Tm thin films is attributed to band-to-band transition. A white PL emission was obtained in a $GdVO_4$:Eu,Er,Tm thin film with Eu, Er and Tm contents of 0.2, 0.7 and 1 at.%, respectively: CIE chromaticity color coordinates. (X=0.352 and Y=0.351). In addition, a white emission was obtained in a thin-film electroluminescent (TFEL) device made with this thin film.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 1998년도 추계 논문 발표회 논문집
• /
• pp.1-6
• /
• 1998

The object color does not look same under the different light source. It depends on the surface spectral reflectance and the spectral distribution of light source. Therefore we should find the surface spectral reflectance of object color and the spectral distribution of light source for color reproduction. Using Winer estimation, we can reconstruct the spectral reflectance from low dimensional images obtained with a few filters. The kind and the number of filters have the effect on the estimation of the spectral reflectance. Therefore it is important that optimal filters are selected to minimize the error of the result. In this paper, we describe methods to select optimal filters with minimum error between measured and estimated surface spectral reflectance and to estimate surface spectral reflectance of Munsell color from six band images by using Wiener estimation.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.61-71
• /
• 2002

Color-code imaging should be one of the best display tools for the quick perception of both damage area and its intensity, In this study we proposed the standard color code corresponding to maximum observed acceleration value. Since the acceleration value changes with frequency contents, we suggested to limit the frequency band less than 10Hz. The background considerations of this limitation, magnitude vs. dominant frequency, natural characteristics of artificial noises and the relationship between velocity and acceleration, were reviewed in detail. The standard of color code was assigned from 0.001%g to 20%g based on the possible earthquakes at Korean peninsula and the color imaging given by RGB value was shown to be very consistent, irrespective of hardware configuration.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1767-1770
• /
• 2003

This paper proposes an algorithm that can reduce the estimation error of surface spectral-reflectance(SR) when using a conventional 3-band RGB camera. In the proposed method, the estimation error is reduced by using adaptive principle components (PCs) for each color region. To build an adaptive set of PCs, n SR populations are organized for n PC sets using the Lloyd quantizer design algorithm. The Macbeth Color Checker is utilized for the initial representative SR values for 1485 Munsell color chips as the total color population, then the Munsell chips arc divided into subsets with a set of corresponding adaptive PCs organized for each subset.

• 천문학회지
• /
• 제38권4호
• /
• pp.385-414
• /
• 2005

We have searched for infrared emission from supernova remnants (SNRs) included in the Spitzer Galactic Legacy Infrared Mid-Plane Survey Extraordinaire (GLIMPSE) field. At the positions of 100 known SNRs, we made 3.6, 4.5, 5.8, and $8.0{\mu}m$ band images covering the radio continuum emitting area of each remnant. In-depth examinations of four band images based on the radio continuum images of SNRs result in the identification of sixteen infrared SNRs in the GLIMPSE field. Eight SNRs show distinct infrared emission in nearly all the four bands, and the other eight SNRs are visible in more than one band. We present four band images for all identified SNRs, and RGB-color images for the first eight SNRs. These images are the first high resolution (<2') images with comparative resolution of the radio continuum for SNRs detected in the mid-infrared region. The images typically show filamentary emission along the radio enhanced SNR boundaries. Most SNRs are well identified in the 4.5 and $5.8{\mu}m$ bands. We give a brief description of the infrared features of the identified SNRs.

• 한국광학회지
• /
• 제29권6호
• /
• pp.275-284
• /
• 2018

본 연구에서는 나노 홀 배열과 나노 디스크 배열이 AZ 1500 나노 기둥에 의해 분리된 하이브리드 구조의 컬러 필터 설계방법을 제시한다. 우리는 각 설계 변수에 따른 투과광 특성 변화의 경향성을 이용하여 RGB 컬러 필터 설계 방법을 제시한다. 특히, 단면에서의 전기장의 세기 분포를 분석하여 두 배열에서 각각 발생하는 국소 표면 플라즈몬 공명이 서로에게 영향을 주지 않도록 AZ 1500 나노 기둥의 높이를 설정하였다. 최적화된 컬러 필터의 투과광 특성은 다음과 같다. Red 컬러 필터의 투과광 특성은 가시광 대역에서 Red를 표현하는 파장대역이 차지하는 비율이 55.01%, 투과도 최댓값이 41.53%이다. 그리고 Green컬러 필터의 경우, Green을 표현하는 파장대역의 비율이 40.20%, 투과도 최댓값은 42.41%이다. Blue 컬러 필터의 경우, Blue를 표현하는 파장 대역의 비율이 32.78%, 투과도 최댓값은 30.27%이다. 본 연구를 통해 산업용 장치에 집적되는 컬러 필터의 특성 향상을 이끌어 낼 수 있을 것으로 예상한다.