• 한국식품영양과학회지
• /
• 제29권6호
• /
• pp.1009-1015
• /
• 2000

본 연구에서는 적갓김치의 발효과정에 따른 발효특성과 항산화성을 규명하기 위해 갓김치와 가열 쇠고기를 이용한 model system을 만들어 쇠고기 지방질에 대한 항산화성을 살펴보았고 용매별로 추출한 김치성분의 항산화성을 살펴보았다. 적 갓김치는 15$^{\circ}C$에서 발효가 진행되면서 6일째 김치의 pH가 4.5에 도달하였다. 발효진행에 따라서 산도는 증가하였고 환원당은 서서히 감소하였으며 이때 젖산균수 역시 최대치에 도달하였다. 또한 a-scorbic acid 함량은 발효가 진행되면서 감소하였다가 발효 6일째에 다시 다소 증가하였다. 총 페놀함량은 생 시료에서보다는 갓김치에서 높게 나타났으며 발효가 진행됨에 따라 총 페놀함량은 증가하였다. 적 갓김치를 가열쇠고기와의 model system을 조제하여 TBA가를 통해 항산화성을 살펴본 결과 첨가한 김치의 양이 많을수록 항산화성이 높게 나타났으며 생시료일 때보다는 김치의 항산화성이 우수하였으며 발효가 진행된 숙성상태일 때 더 항산화성이 우수하였다. 동결건조시킨 적 갓김치를 물, 메탄올, 핵산 세가지 용매로 추출하여 항산화성을 살펴보았을 때 메탄을 추출물의 항산화성이 가장 높게 나타났다. 또한 담금직후보다는 숙성된 상태의 갓김치가 항산화성이 높았다.

• International Journal of Costume and Fashion
• /
• 제7권2호
• /
• pp.18-31
• /
• 2007

The purpose of this study is to examine color characteristics and color changes of the fashion collections through 1990s, and to provide the efficient color information for color planning upon fashion themes. For this research, a total of 30,084 colors were collected from Paris, Milan, London, New York Collections in 1990s. Those colors were first measured by the Pantone Textile Color Specifier and COS Color System and spectrophotometer(color eye 580). These measured color values $L^{\ast}a^{\ast}b^{\ast}$of CIE were converted into H V/C of Munsell System, and 12 tones of PCCS with 5 achromatic colors. The characteristics of collected colors were analyzed in general and by place, season and year. The results of the study are as follows : First, the hues of purple blue, yellow red, red, yellow and the tones of grayish, pale, white, black, dark grayish, dull, light grayish appeared mostly. Yellow was shown quite frequently in spring/summer while purple, purple blue, red and yellow red in fall/winter. White, pale, light, light grayish and light gray were shown more frequently in spring/summer while Black, dark grayish, grayish, dark gray and dark in fall/winter. Second, the characteristics of colors by 4 representative places were similar to the general characteristics of colors in 1990's. Third, There were distributed widely Red, Yellow Red, Yellow in the early 1990s, Green Yellow, Green, Blue Green in the mid of 1990s, and Purple Blue, Purple in the late of 1990s. The distribution range of chromatic colors showed wide in both of the early of 1990s and the mid of 1990s for a while, and achromatic colors of grayish, gray and black appeared mostly in the late of 1900s.

• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.23-36
• /
• 2009

The goal of esthetic restoration is to achieve morphologic, optical, and biologic acceptance. Creation of a natural looking ceramic restoration, which blends harmoniously with surrounding dentition, is not always achieved. A successful color match is an important aspect of any esthetic dental restoration. Since natural enamel has inherent translucency, it is important that ceramic restorations reproduce the translucency and color of the natural teeth. However, the final color match of porcelain crowns to adjacent natural dentition remains some problem. Difficulties related to color matching arise from the structural differences that exist between metal ceramic crowns and natural teeth, the limited range of available ceramic shades, inadequate shade guides, different types of metal alloys, repeated firing, the condensation technique, and varying compositions of ceramic materials. Many factors contribute to the esthetic success of dental restoration: optical properties such as color and its elements of hue, value, and chroma; translucency and opacity; light transmission and scattering; and metamerism and fluorescence. The purpose of this study was to determine the color changes of metal-ceramic system with different veneering porcelain powder after repeated firing. The objectives of this in vitro study were to measure the lightness($L^*$), chromaticity($a^*$), chromaticity($b^*$), chroma($C^*$), hue(h), reflectance(%), color difference(${\Delta}E$). The following conclusions were obtained: 1. An increase in the number of firings resulted in decrease in lightness($L^*$) but increase in chromacticity($a^*$) with all porcelain. After the second sintering resulted in decrease in chromacticity($b^*$) with opaque-dentin porcelain and dentin porcelain but in increase with enamel porcelain and translucency porcelain. And after the second sintering resulted in decrease in chroma($C^*$) with opaque-dentin porcelain and dentin porcelain, but on the whole side in decrease with enamel porcelain and translucency porcelain. 2. After the second firing, a increase in the number of firings resulted in decrease reflectance(%) in all wavelength. 3. There were noticeable color differences(${\Delta}E$) between first sintering and multiple firings(dentin porcelain: 5.29~8.15, opaque-dentin porcelain: 4.83~8.2, enamel porcelain: 8.93~13.15, translucency porcelain: 9.37~12.91), but the color difference(${\Delta}E$) after second sintering were down to 4.87 in all porcelain. 4. Given the NBS Criteria, a 'trace' was not found this study but a 'slight' was found 2-3, 3-5 in dentin porcelain, 2-3 in opaque-dentin porcelain, 3-5, 5-10 in enamel porcelain and translucency porcelain, a 'noticeable' was 2-5, 3-10, 5-10 in dentin porcelain and opaque-dentin porcelain, 2-3, 2-5, 3-10 in enamel porcelain 2-3, 3-10 in translucency porcelain, an 'appreciable' was 1-2, 1-3, 2-10 in dentin porcelain 1-2, 1-3, 2-10, 3-10 in opaque-dentin porcelain, 2-10 in enamel porcelain, 2-5, 2-10 in translucency porcelain, a 'much' was 1-5, 1-10 in dentin porcelain and opaque-dentin porcelain, 1-2, 1-3, 1-5 in enamel porcelain 1-2, 1-3, 1-5, 1-10 in translucency porcelain, a 'very much' was 1-10 in enamel porcelain.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.587-598
• /
• 2005

Statement of problem: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glass-ceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. Purpose: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. Materials and method: The CIE $L^*a^*b^*$(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain -1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core -0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value$({\Delta}E)$ was calculated. Results and conclusion: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and $L^*,\;a^*\;and\;b^*$ values when the total thickness of specimen combination was smaller than 1.4 mm(P<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value$({\Delta}E)$ is smaller than 2 $({\Delta}E<2)$ when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.

• 한국재료학회지
• /
• 제23권5호
• /
• pp.286-292
• /
• 2013

Generally, the color gold has had a biased conception due to its traditional use. Thus, this bias has resulted in a lack of usage of golden glaze on ceramics and also a lack of extensive studies of such glazes. In this paper, optimum conditions and mechanism of formation of gold color crystallization glaze containing $Fe_2O_3$(hematite), which is developed for gold colors of ceramic glazes, were studied. Experimental result showed that there are pyroxene based on diopside and $TiO_2$ phase in the base of a crystallization glaze with a value of $TiO_2$ of 6 wt% confirmed by XRD and Raman Spectroscopy. When $Fe_2O_3$ was used as a colorant for the gold color, the $TiO_2$ peak became extinct and the intensity of the diopside peak was sharper. Feldspar of 60 wt%, talc of 20 wt% and limestone of 20 wt% were used as the starting materials and these were tested using a three component system. The best result of test was selected and extended to its vicinity as an experiment to determine $TiO_2$ and $Fe_2O_3$ contents. The glaze with $TiO_2$ of 6 wt% and $Fe_2O_3$ of 12 wt% addition showed stable pyroxene based diopside crystals and the development of gold color. This gold color was obtained with CIE-$L^*a^*b^*$ values of 51.27, 4.46, 16.15 (a grayish yellow brown color), which was gained using the following firing conditions: temperature increasing speed $5^{\circ}C$/min, holding for 1 h at $1280^{\circ}C$, annealing speed $3^{\circ}C$/min till $1100{\circ}C$, holding for 2 h at $1100{\circ}C$, and finally natural annealing.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.225-235
• /
• 2002

The color stability of current prosthetic composites is unknown, even though the quality of composite materials has been improving. This study examined the intrinsic color stability of various current prosthetic resins (ceramic-polymers) after an accelerated aging process and the extrinsic color stability after immersion in a coffee solution. By comparing the amount of discoloration after aging with that without aging, the effect of the accelerated aging process on external discoloration could be evaluated. Three current prosthetic composites (Artglass, Targis, Sculpture), one light polymerized direct composite (Z100) and one dental porcelain control (Ceramco) were assessed. The color changes (${\Delta}$E) of all the specimens were determined using the CIE $L^{*}a^{*}b^{*}$ color order system with a reflected spectrophotometer. The results were as follows: 1. The prosthetic composite materials subjected to the accelerated aging test showed no significant difference in color changes (p >.05). 2. In the coffee solution immersion test after the aging process, the color changes of the Targis and Artglass groups were not different from that of the Z100 group, which showed the highest color change. 3. In the immersion only test, a significantly high color change was observed in the sculpture glazing group. 4. The aging process influenced on the color changes more in the Targis, Artglass and Z100 groups than in the Sculpture and Ceramco groups.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.549-559
• /
• 1994

The purpose of this study was to study accumlated residual soils which may be one of the causes for yellowing of worn cloths. Wear and wash tests of white cotton undershirts were repeated at 30 households sellected at random over a period of 60 days. Laundry conditions were similar to home laundry habits in a fact-finding survey, using a powdery heavy duty detergent containing no enzymes or enzymes. The subjects in this study were survey of laundry actual condition, the undershirts from prior to and after the final washing was measured residual soils, $L^*a^*b^*$ value and mellowness index of CIE system. D3ta were analysed by simple correlation analysis of wear and wash cycle, residual soils, whiteness The results obtained were summarized as follows: 1. Using pattern of washing machine, Presoaking was no singinificant differnece in general characteristics of survey respondent. Laundry frequency was significant difference in income level, occupation of housewives whether or not. Use of cold and hot water was significant difference in residence shape. 2. The analyzed consequences of recognition and actual behavior in connection with laundry were found variables each other to have independence or not. 3. Amount of residual sebum soils is using non-enzyme detergent were much more than in using enzyme detergent, increased linearly with increase of the number of wear and wash cycles. 4. Residual protein soils with increase of the number wear and wash cycles less than in laundering more easy than sebum soils. Since accumulated residual sebum soils were much more than residual protein soils. 5. Increase of residual soils was raised mellowness index and diminshed whiteness. yellowness index of residual sebum soils was higher than protein soils. If increase of whiteness will be incresed, amount of residual sebum soils will be decreased sebum soils. Because amount of residual sebum soils much more than protein soils, yellowness index of residual sebum soils was more higher than that of protein soils.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.128-135
• /
• 2015

Objectives: This study evaluated the effects of the resin thickness on the microhardness and optical properties of bulk-fill resin composites. Materials and Methods: Four bulk-fill (Venus Bulk Fill, Heraeus Kulzer; SDR, Dentsply Caulk; Tetric N-Ceram Bulk Fill, Ivoclar vivadent; SonicFill, Kerr) and two regular resin composites (Charisma flow, Heraeus Kulzer; Tetric N-Ceram, Ivoclar vivadent) were used. Sixty acrylic cylindrical molds were prepared for each thickness (2, 3 and 4 mm). The molds were divided into six groups for resin composites. The microhardness was measured on the top and bottom surfaces, and the colors were measured using Commission Internationale d'Eclairage (CIE) $L^*a^*b^*$ system. Color differences according to the thickness and translucency parameters and the correlations between the microhardness and translucency parameter were analyzed. The microhardness and color differences were analyzed by ANOVA and Scheffe's post hoc test, and a student t-test, respectively. The level of significance was set to ${\alpha}=0.05$. Results: The microhardness decreased with increasing resin thickness. The bulk-fill resin composites showed a bottom/top hardness ratio of almost 80% or more in 4 mm thick specimens. The highest translucency parameter was observed in Venus Bulk Fill. All resin composites used in this study except for Venus Bulk Fill showed linear correlations between the microhardness and translucency parameter according to the thickness. Conclusions: Within the limitations of this study, the bulk-fill resin composites used in this study can be placed and cured properly in the 4 mm bulk.

• 융합정보논문지
• /
• 제9권7호
• /
• pp.159-167
• /
• 2019

본 연구는 구강양치용액이 복합레진의 색조 안정성과 표면미세경도 및 표면조도에 미치는 영향에 대하여 알아보고자 하였으며, 실험실 연구로 Filtek P60과 Filtek Z250의 두 종류의 복합레진으로 시편을 제작하였다. 각 시편은 10개씩 8개 그룹으로 나누었다. 실험전 모든 시편을 colorimater를 이용하여 색조($L^*$, $a^*$, $b^*$)를 측정하였다. 대조군으로 증류수, 실험군으로 무색소, 녹색 및 보라색을 띄는 시판 구강양치용액을 사용하여 14일간 색변화, 표면미세경도, 표면조도 등을 측정하여 수집된 자료들 분석하였다. 녹색 및 보라색을 띄는 구강양치용액에서 눈에 띄는 색변화를 보였고, 모든 구강양치 용액군에서 표면미세경도는 감소하고 표면조도는 거칠어진 양상이 관찰되었다. 따라서 구강양치용액을 2주 이상 장기간 사용하게 되면 복합레진 표면에 변화를 야기할 수 있으므로, 안전한 사용을 위하여 짧은 기간 사용을 권장해야 할 것으로 사료된다.

• 한국생활과학회지
• /
• 제22권2호
• /
• pp.365-374
• /
• 2013

The purposes of this study were to evaluate the color characteristics and color sensibility of mulberry/cotton blended fabrics dyed with indigo, the natural dye, and analyze effects of them on color preferences. The values of CIE $L^*$, $a^*$, $b^*$ $C^*$, h were calculated for the color characteristics of indigo-dyed fabrics, and their hue, value, and chroma were calculated according to the Munsell color system. Fifty male and female college students evaluated the color sensibility of nine types fabrics dyed with indigo on a seven-point scale. The data were analyzed by descriptive statistics, factor analysis, Kruscal-Wallis test, correlation analysis, and regression analysis. The mulberry/cotton blended fabrics naturally dyed with indigo showed the characteristics of PB color tones, low value, and low chroma. The color sensibilities of fabrics dyed with indigo were classified into four factors: 'classic', 'sporty', 'elegant' and 'natural'. There were significant differences according to the fibers and the repeating times of dyeing in the color sensibility for the fabrics. Cotton fabrics were evaluated to be more classic, sporty, elegant, and natural than the mulberry/cotton blended fabrics, and the deeper the color, the more classic, sporty, and elegant the fabric was evaluated. The students preferred the indigo dyed fabrics which have more classic, sporty, and natural sensibility. There were significant relationships between the color sensibilities and colorimetric properties of the fabrics dyed with indigo. The color preferences of the dyed fabrics with indigo were found to be influenced by the 'classic', 'sporty', 'natural' of color sensibility.