• 전기학회논문지
• /
• 제57권12호
• /
• pp.2194-2198
• /
• 2008

In this paper, the construction of secondary reaction plate is analyzed by 3-D Finite Element Method(3-D FEM) to consider the influence of its variation on the transverse edge effect of LIM. The effective 3-D analysis model for considering the transverse edge effect caused by the finite widths of the primary and the secondary is proposed. The simple method measuring the transverse edge effect by using the patterns of currents induced in the secondary reaction plate is also proposed. With this effective analysis method, various models of secondary reaction plate with overhang and cap has been analyzed to consider the relationship between the construction of secondary reaction plate and the transverse edge effect of LIM.

• The Journal of the Acoustical Society of Korea
• /
• 제21권3E호
• /
• pp.112-118
• /
• 2002

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method (FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the trend of the change of the modal frequencies was examined with the variation of the tuning fork length and width. An formula for the natural frequencies-tuning fork length relationship were derived from the numerical analysis results. Finally the BEM was used for the sound pressure field calculation from the structural displacement data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1201-1204
• /
• 2003

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method(FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the trend of the change of the modal frequencies was examined with the variation of the tuning fork length and width. An formula for the natural frequencies-tuning fork length relationship were derived from the numerical analysis results. Finally the BEM was used fur the sound pressure field calculation from the structural displacement data.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.233-241
• /
• 2003

최근 들어 지오텍스타일 튜브공법은 과거의 임시공법의 한계를 극복하고 다양한 분야에서 주요적용공법으로 활용이 확대되고 있다. 본 연구에서는 수치해석기법을 활용하여 지오텍스타일 튜브의 시공과정에서의 거동에 대하여 연구를 수행하였으며, 수치해석결과를 기존 연구 발표된 현장 모형시험 결과와 비교 분석하였다. 수치해석은 평면변형해석과 3차원 유한요소해석 기법을 이용하여 채움 과정에서 발생하는 정수압에 따른 지오텍스타일 튜브의 형태변화와 실대형 현장실험 결과를 비교 분석하였다. 또한, 3차원 유한요소해석에서는 정수압과 지오텍스타일의 강성변화에 따른 매개변수 해석을 통하여 지오텍스타일 튜브공법의 3차원 유한요소해석 기법을 제시하였다. 평면변형 해석이론에 의한 수치해석은 지오텍스타일 튜브 전용해석 프로그램인 GeoCoPS(version 2.0)를 활용하였으며, 3차원 유한요소 해석은 범용 유한요소해석 프로그램 ABAQUS(version 5.88)를 이용하였다. 평면변형 해석과 3차원 유한요소해석 결과 모두 실대형 현장실험 결과와 근접한 거동을 나타내었으며 적용토사의 종류 및 해석상의 가정사항으로 약간의 차이점들은 발생하지만 평면변형해석 및 3차원 유한요소해석방법을 통하여 채움과정에서의 지오텍스타일 튜브의 거동을 예측할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1288-1290
• /
• 2005

This paper analyzed the characteristics of the claw pole PM step motor by using 3D FEM. As the magnetization occurs along the z-axis of the motor, it is necessary to apply 3D FEM for analysis of the claw pole PM step motor. Considering the computation time, however, the number of the analysis model is minimized by using the "Design of Experiments(DOE)". By using the "DOE", efficient analysis was able to be done. To see the effects of the design factors, the 3D FEM is applied only to the selected models. As the design factors, the teeth shape, the number of turns and the permanent magnet overhang was selected.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1237-1242
• /
• 2011

족저부의 압력 분포를 해석하기 위하여 인체에 근접한 족부 상세 해석용 모델을 개발하였다. 이 상세 해석용 모델은 족부의 단층촬영 영상(CT scan image)으로부터 밀도 차이에 따라서 골격부와 피부 및 피하조직을 각각 3D CAD 모델로 변환한 후에 결합하여 구성하였며, 근육과 뼈, 피부 모두를 반영한 3D 족부 유한요소해석 모델로 개발하였다. 개발된 3D 족부 유한요소모델에 대하여 NASTRAN의 접촉해석을 수행하여 족저압의 분포를 계산하였으며, 이러한 결과는 균일분포압력을 작용시키는 당뇨병 환자용 신발 설계의 기초 자료로 활용될 수 있다.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1043-1049
• /
• 2012

The FEM analysis of machine tools is the general analysis process to evaluate machine performance in the industry for a long time. Despite advances in FEM software, because of difficult simplicity of CAD drawing, little experience of joints stiffness modeling and troublesome manual contact area divide for bindings, the industry designers think the FEM analysis is still an area of FEM analysis expert. In this paper, the automation of modeling process with simplicity of drawing, modeling of joints and contact area divide is aimed at easy FEM analysis to enlarge utilization of a virtual machine tools. In order to verify the effects of modeling automation, a slant bed type model with tilting table is analyzed. The results show FEM modeling automation method only needed 45 minutes to complete the whole modeling process, while manual modeling method requires almost one month with 8200 calculations for coordinate transformations and stiffness data input.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.113-115
• /
• 1998

This paper presents the indirect boundary integral equation method(BIEM) to analyze 3D moving conductor problem. Instead of an artificial upwind algothm, the proposed method uses a fundamental Green's function which is a particular solution of diffusion equation. Therefore, this method yields a stable and accurate solution regardless of the Peclet number. The indirect BIEM is compared with 3D upwind FEM for a numerical model which has analytic solutions.

• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.225-237
• /
• 2022

Settlement evaluation is important for shallow tunnels in big cities to estimate the settlement that occurs due to the excavation of twin tunnels. The majority of earlier research on analytical solutions, on the other hand, concentrated on calculating the settlement for a single tunnel. This research introduces a procedure to evaluate the settlement induced by the excavation of twin tunnels (two parallel tunnels). In this study, a series of numerical analysis were performed to validate the analytical solution results. Two geological conditions were considered to derive the settlement depending on each case. The analytical and numerical methods were compared, which involved considering many sections and conducting a parametric study; the results have good agreement. Moreover, a comparison of the 3D flat model and 2D (FEM) with the analytical solution shows that in the fill soil, the maximum settlement values were obtained by the analytical solution. In contrast, the values obtained by the analytical solution in the rock is more conservative than those in the fill. Finally, this method was shown to be appropriate for twin tunnels dug side by side by utilizing finite element analysis 3D and 2D (PLAXIS 3D and PLAXIS 2D) to verify the analytical equations. Eventually, it will be possible to use this approach to predict settlement troughs over twin tunnels.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.601-607
• /
• 1998

This paper presents the efficient 2-D linear brake analysis model which can compensate the lateral leakage flux by changingng the airgap length and magneto-motive force(MMF). The linkage flux of the 2-D analysis is larger than that of 3-D analysis. This is caused by the assumption in 2-D analysis that geometric and physical values are constant along the perpendicular direction(z) to the analysis region. The equivalent MMF have been calculated from the linkage flux difference between the 2-D and 3-D analyses which are performed at zero velocity. The performances of the linear brake have been analyzed effectively by using the compensated 2-D models without using 3-D FEM.