• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.05a
• /
• pp.363-366
• /
• 2005

This study was designed to investigate effects of AC frequency on the thawing process, using laboratory scale ohmic thawing system. The ohmic thawing property of 30% gelatin matrix was examined by using low frequency alternating current (20 Hz-110 Hz, sine wave). When the voltage was fixed to 50V, thawing time was negligible influenced as the frequency decreased. Total thawing time of the gelatin matrix decreased sharply at the frequency of 50 Hz. The current flow was first observed during the thawing process in the temperature ranges of $-\;5^{\circ}\;C{\sim}\;-\;3^{\circ}\;C$.

• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.245-254
• /
• 2020

The interaction between the frozen soil and building structures deteriorates with the increasing temperature. A nuclear magnetic resonance (NMR) stratification test was conducted with respect to the unfrozen water content on the interface and a shear test was conducted on the frozen soil-structure interface to explore the shear characteristics of the frozen soil-structure interface and its failure mechanism during the thawing process. The test results showed that the unfrozen water at the interface during the thawing process can be clearly distributed in three stages, i.e., freezing, phase transition, and thawing, and that the shear strength of the interface decreases as the unfrozen water content increases. The internal friction angle and cohesive force display a change law of "as one falls, the other rises," and the minimum internal friction angle and maximum cohesive force can be observed at -1℃. In addition, the change characteristics of the interface strength parameters during the freezing process were compared, and the differences between the interface shear characteristics and failure mechanisms during the frozen soil-structure interface freezing-thawing process were discussed. The shear strength parameters of the interface was subjected to different changes during the freezing-thawing process because of the different interaction mechanisms of the molecular structures of ice and water in case of the ice-water phase transition of the test sample during the freezing-thawing process.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.293-300
• /
• 2012

This study investigated the effects of a low-voltage ohmic heating process (2.5 and 3.8 V/cm) on the thawing characteristics and NaCl diffusion of pork. The thawing rate of pork was dependent on the applied voltages and brine salinities, and few differences were obtained in pork quality parameters (color, water-holding capacity, and shear force) regarding the different treatments. The NaCl concentration of pork after ohmic thawing was higher than that following brine-immersion thawing, however, the NaCl diffusion did not differ from when fresh meat was immersed in brine. For application of the ohmic process in fresh pork, various ohmic pulses were generated in order to prevent the meat from overheating, and the results indicated that the ohmic process was a better way to enhance NaCl diffusion compared with immersing pork at high temperature. Although the mechanisms involved in NaCl diffusion at low-voltage electric field strength were unclear, the present study demonstrated that the ohmic process has a potential benefit in the application of meat processing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.3
• /
• pp.115-120
• /
• 1989

Physicochemical changes were investigated during repeated freezing and thawing processes using fish meat paste of alaska pollack (Theragra chalcogramma). During repeated thawing process, the solubility of myofibrillar protein, $Ca^{++}-ATPase$ activity, water holding capacity (WHC), electrophoretic patterns and rheological properties were evaluated at various thawing temperatures. Solubility of myofibrillar protein and $Ca^{++}-ATPase$ activity were decreased with increasing thawing temperatures. Thawing temperatures and the frequency of freezing and thawing processes did not affect WHC significantly. Upon repeated freezing and thawing cycles, electrophoretic patterns showed that only the amount of myosin heavy chain was decreased, whereas the amount of actin remained constant. Young's modulus for viscoelasticity of fish meat pastes increased with increasing thawing temperatures and the value showed maximum at third cycle and decreased thereafter.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.3
• /
• pp.175-178
• /
• 2004

We here report that the muscle of 'gukmeri-bok' puffer fish (Takifugu vermicularis radiatus) is intoxicated after freezing and thawing processes even though it is not toxic when it is fresh. This study was carried out to investigate the effect of different freezing and thawing conditions as well as the effect of the presence of skin or viscera on the intoxication of muscle of 'gukmeri-bok' puffer during freezing and thawing process. As a result of this investigation, thawing condition, but not freezing conditions or periods played an important role in muscle intoxication. Tetrodotoxin secretory grands exist in the skin of toxic puffer fish, the skin was more responsible for the muscles intoxication than the viscera during the freezing-thawing process. In other words, no toxicity was measured in the muscle of skinned-frozen specimens even when thawed. According to this result, it is recommended that the skin and viscera must be removed before being frozen for edible purpose. Otherwise, when a whole fish should be frozen, alternative half-thawing and removal of skin from frozen specimens is recommended.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.543-550
• /
• 2000

Rock slopes along the road or railroad are affected by temperature and therefore experienced iterative freezing-thawing process between winter and early spring. The purpose of this study is to analyze the stability of rock slopes which are influenced by the deterioration due to the freezing-thawing. The analysis is the homogenization method which evaluates the strength property of discontinuous rock mass, and as a strength failure criterion, Drucker-Prager failure criterion is used. The deterioration property of real rock is obtained by a freezing-thawing laboratory test of tuff and this property of deterioration is quantitated and used as a basic data of stability analysis for rock mass. To evaluate the deterioration depth due to the freezing-thawing in situ rock slope, one dimensional heat conductivity equation is used and as the result I can find that the depth of which is affected by a temperature. After the freezing-thawing depth of model slope is determined, we analyze the pattern of rock mass stength value of rock slope model which excesses the limit of self-load.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.270-278
• /
• 2001

Hydrogels for wound dressing were manufactured using poly(vinylalcohol)(PVA) and poly(N-vinylpyrrolidone)(PVP). The hydrogels were obtained by exposing to $^{60}$ Co${\gamma}$-rays after freezing and thawing of aqueous solutions of PVA and PVP to improve mechanical strength. Mechanical properties such as gelation, water absorptivity and gel strength were examined after repeating the \"freezing and thawing\" of PVA/PVP hydrogels, and then irradiating them at 40 kGy. The PVA/PVP ratio was in the range of 30:70 ~ 100:0, and the solid concentration of PVA/PVP was 20 wt%. The gelation and strength of hydrogels were much higher when \"freezing and thawing\" and the irradiation process were used than when only the irradiation process was utilized. In addition, the mechanical properties of PVA/PVP hydrogels after repetition of \"freezing and thawing\" are discussed. thawing\" are discussed.ssed.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.301-307
• /
• 2018

This paper deals with the development of the high frequency thawing machine. The fishery products caught over the world are kept frozen to maintain freshness. These fishery products require thawing before they are sold to customers as food. However, the thawing process can cause freshness reduction, drip coming out, quality deterioration, discharging polluted water, as well as a lot of space and time. The high frequency thawing machine developed to solve this problem has a narrow space, a short thawing time and a small drip. The developed high frequency thawing machine can be used in many fields such as fish processing plant, livestock processing plant. This paper describes the design of the high frequency thawing machine by developing the high frequency generator, development of the controller, and the design of mechanism, and shows the superiority of the high frequency thawing machine by the performance evaluation.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.625-631
• /
• 1999

In this study, a series of test was conducted to show the characteristics of freezing -thawing process on soilcrete using the soft clay in a redevelopment paddy area, was treated with cement and several additives such as Beestar, CaSO4 , MgO, and polypropylene fiber, From the results of test, it was found that first addtivies -cement and beestar-was effective for compressive strength, and the resistance against freezing -thawing process was improved by secondary additives, in the order their effectiveness, i.e. CaSO4 , Synthetic fiber, MgO and Beestar.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.374-379
• /
• 2006

This study was carried out to investigate the physicochemical properties of frozen pork muscle which has been thawed using the ohmic thawing process, and to establish the optimal ohmic power intensity. The samples were frozen at $-40^{\circ}C$ and thawed at 0, 10, 20, 30, and 40 V by ohmic thawing. Increasing ohmic power intensity correlated with increased thawing rates. The relationship between ohmic power intensity and thawing rate can be represented as a polynomial function. The pH value decreased with increasing ohmic power intensity (p<0.05). With regard to color measurement, the $L^*$, a, and b values of thawing at all ohmic power intensities were not significantly different. The water holding capacity showed a peak value of 41.62% with an ohmic thawing intensity of 30 V. Cooking losses were lowest at the lowest ohmic thawing intensity of 10 V. Thiobarbituric acid reactive substance (TBARS) levels with all thawing processes were slightly higher than that of the control (p<0.05). Increasing ohmic power intensity did not tend to change the total volatile basic nitrogen (TVBN) value.