• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.5
• /
• pp.251-261
• /
• 2011

The changes in microstructure and texture during annealing were examined in a series of 0.015% C-1.5% Mn cold-rolled sheet steels with 0~0.5% Mo. Orientation distribution function data were calculated from the (110), (200), (211) pole figures determined on the rolled plane of cold-rolled and annealed steel sheets. Regardless of Mo content and annealing conditions, martensite volume fraction was less than 1.0%, not affecting the texture evolution. Textural change at the cooling stage after heating at $820^{\circ}C$ for 67 sec was not observed. Increasing the Mo content and annealing temperature markedly strengthened the intensities of ${\gamma}$-fiber texture, resulting in the increase in $r_m$ value. The desirable texture evolution for deep drawability in the 0.5% Mo steel may be mainly caused by the grain refining effect of Mo carbide in the hot-rolled steel sheet.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.2
• /
• pp.131-141
• /
• 2020

This purpose of this study was to investigate the quality characteristics of jellies added with lemon myrtle extract. Lemon myrtle leaves were extracted for 0, 3, 5, 7, 9 minutes, respectively, in 90℃ water and used for jelly preparation. The moisture content of control showed the lowest value and the content increased significantly as the extraction time of lemon myrtle increased. The pH of L0 was significantly high and increased significantly with the increase of extraction duration time. The lightness value was the lowest in the L3. The redness showed the lowest value in the L9. The yellowness showed the lowest value in the L0. In texture properties the hardness of L9 showed the highest value and the lemon myrtle extraction duration increased significantly. The cohesiveness was highest in the L0 and lowest in the L5. Gumminess and chewiness increased significantly with increasing extraction duration. Total polyphenol content was the highest in the L5 and the jellies with lemon myrtle extracts were significantly higher than the L0. DPPH radical scavenging activities increased significantly with increasing extraction duration. The ABTS radical scavenging activity of the L0 was the lowest. In the sensory evaluation overall preference, color, sweetness, texture, and lemon myrtle flavor did not show any significant differences among the samples.

• Journal of the Korean Society of Food Culture
• /
• v.37 no.2
• /
• pp.171-177
• /
• 2022

This study evaluated the nutritional composition and quality traits of rabbit meat as compared to chicken meat. Samples of loin (M. longissimus dorsi) and breast meats were collected from rabbit and chicken carcasses, respectively. The meats were then analyzed for the proximate composition, collagen and energy contents, fatty acid composition, myoglobin and heme iron contents, pH value, water-holding capacity (WHC), cooking loss, meat color, Warner-Bratzler shear force (WBSF) value, and texture profile. Compared to chicken breast meat, lower (p<0.05) protein content and higher (p<0.05) ash and collagen contents were obtained in rabbit loin meat. Rabbit meat remarkably had higher (p<0.05) total polyunsaturated fatty acids (PUFA) and linolenic acid contents and lower (p<0.05) n-6/n-3 PUFA ratio as compared to chicken meat. The pH value and WHC were lower (p<0.05) in rabbit meat than in chicken meat (p<0.05). Rabbit meat exhibited lower (p<0.05) L^* value and higher (p<0.05) a^* and b^* values compared to chicken meat (p<0.05). The WBSF value, hardness, and gumminess were higher (p<0.05) in rabbit meat than in chicken meat (p<0.05). These findings suggest that rabbit meat has higher essential n-3 PUFA, darker color, and firmer texture as compared to chicken meat.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.6
• /
• pp.747-752
• /
• 2006

This study developed gasiogapidduk to increase the functional value and flavor of traditional Baiksulgi by adding gasiogapi powder. Powdered nonglutinous rice was mixed with powdered leaves (1%, 2%, 3%), powdered stems roots (1%, 3%, 5%), and powdered freeze-dried root extracts (5%, 10%, 15%) of Acanthopanax senticosus, known as the second ginseng, in order to find the combination ratio optimal to the senses. Sensory evaluation and texture characteristic evaluation of gasiogapidduk were used to develop a functional rice cake appealing to the largest number of people. Sensory evaluation consisted of evaluating color, smell, taste and texture, preference quality which reflects overall appeal. Texture characteristics were evalauated on hardness, adhesiveness, cohesiveness, springiness and gumminess. As a result, AE5 mixed with 5% powdered freeze-dried Acanthopanax senticosus extract proved to be the most desirable in both sensory evaluation and texture characteristics.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.108-114
• /
• 2008

In this paper, we proposed robust blind watermarking algorithm using texture block coefficient based on discrete cosine transform(DCT). The proposed method embedded all of watermark signals into DC component of $8\times8$ block DCT in order to robust various external attack The texture block coefficient was composed absolute value of DCT coefficients. Experiment showed that the proposed method better than conventional methods in the invisibility and various attack such as dithering, cropping, and scaling.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.125-129
• /
• 2001

NiO buffer layers were deposited on texture Ni tapes fur YBCO coated conductors by MOCVD(metal organic chemical vapor deposition) method, using a single solution source. Variables were deposition temperature and flow rate of $0_2$carrier gas. At higher temperatures, The NiO(111) texture was well developed, but the NiO(200) texture was developed at low temperatures. The best result was obtained at the deposition temperature of$ 470^{\circ}C$ and the gas flow rate of 200 sccm. FWHM value of $\omega$-scan fur NiO(200) of the film and $\Phi$-scan for NiO(111) of the film was $4.2^{\circ}$ and $7^{\circ}$, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.309-312
• /
• 2001

FEM simulating system of the cross-rolling texture formation offers a systematic and efficient way of exploring the relationship between the process variables and the state of plastic anisotropy of sheet product. Cross-rolled sheets possess higher average plastic strain ratios and lower planer anisotropy than those of the straight-rolled sheets. The employed model is a finite-element polycrystal model which each element used in FEM is assumed to be a crystal having different orientation by Takahashi. Texture development, deformation textures due to cross-rolling are predicted for face-centered cubic sheet metal. Crystal orientations are assigned on the basis of the pole figures obtained by X-ray diffraction. Development of anisotropy during cross rolling of an fcc sheet material is predicted theoretically with respected to flow stress and R-value in tensile test.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.368-374
• /
• 2014

We investigated the physical and cooking properties of commercial noodles supplemented with functional ingredients. RVA (rapid visco analyzer), color, water activity, texture and cooking properties were tested. Noodles containing kudzu showed the highest initial gelatinization temperatures, whereas noodle containing kelp displayed the highest peak viscosity and set back. Holding strength and final viscosity were highest in noodles containing mugwort. The L value ($94.89{\pm}0.02$) of wheat flour noodle was the highest. Among functional noodles, L value ($88.65{\pm}0.01$) and a value ($7.42{\pm}0.02$) of cactus noodle were the highest, whereas b value of pumpkin noodle was $40.81{\pm}0.03$, which was higher value than in other noodles. Water activity of cactus noodle was highest (0.455), but the difference was not significant. Cooking properties (including weight, volume, and water absorption) and turbidity of pumpkin noodles showed the highest growth rate. In terms of texture, hardness was highest ($12836.8{\pm}7.1g/cm^2$) in green tea noodles, and cohesiveness and gumminess were highest in kelp and mugwort noodles. Considerig the quality characteristics of noodles supplemented with mulberry leaves, cactus, mugwort, green tea, pumpkin, kelp or kudzu, pumpkin noodles were most stable in terms of gelatinization and cooking properties.

• Korean journal of food and cookery science
• /
• v.21 no.4 s.88
• /
• pp.514-527
• /
• 2005

The purposes of this study were firstly to optimize the recipe for iced cookies by cooking with five different ingredient levels of $Jinuni\;bean(X_1),\;butter(X_2)\;&\;sugar(X_3)$ and secondly to analyze the chemical and sensory test results by using RSM(Response Surface Methodology). As a result of this test, water activity decreased with increasing contents of butter or sugar, while hydrophilic browning decreased independently with increasing sugar content. There was a positive correlation(p<.001) between specific gravity and hardness, although the result was not uniform due to the interaction of each factor. There was a negative correlation(p<.001) between the spread ratio and gravity or hardness, and it tended to increase with increasing each content. Color value L and color value a had positive correlation (p<.001) and the value tended to decrease with increasing the quantity of Jinuni bean. Generally, the strength of the cookies showed a saddle point at the peak of the 3d graph. As a result of sensory evaluation, the color was sensitive to the contents of sugar and Jinuni bean, the texture was sensitive to the contents of butter and sugar, and the taste and overall quality were sensitive to all three factors. Color had a positive correlation(p<.05) with the taste, texture and overall quality. There were high positive correlations(p<.001) between the taste, texture and overall quality. The preference data showed an up-swollen, parabolic shape in the center of the 34 graph, which enabled the optimum value to be determined and the optimum mixture ratio which fulfilled all sensory items was Jinuni bean 93g, butter 188.5g and sugar 155g, indicating a substitution of flour by $44\%$.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.146-154
• /
• 2010

The objective of this study was to improve the Dasik through the addition of sugar alcohol(xylitol, mannitol, sorbitol, erythritol) and agar during the production of Dasik in order to complement the texture of Dasik. Dasik sample were prepared, and the sensory quality and physical characteristics of the samples were compared and the antibacterial characteristics of green tea Dasik containing sugar alcohol against oral bacteria were also examined. The results are summarized as follows. The moisture content of green tea containing sugar alcohol to improve the physical properties was over 30%. The water activity of the agar-added Dasik was higher than that of the control group. The pH was significantly higher for both the experimental group and the control group. The color L value was the brightest at 59.21 for FAOG, while the a value was the lowest for SG, and the b value was the highest for MG. In the texture analysis, the hardness of the control group was the highest at $5181.04\;g/cm^2$ for SSG. The cohesiveness was the highest at 0.16% for SG and the chewiness was the highest at 182.12 g for MG, while the lowest cohesiveness was determined to be 43.73 g for EG. As for the adhesiveness, the agar, sugar alcohol-added groups were overall negative (-) while SG was found to have the lowest negative value at -39.25 g. In the sensory evaluation, the control XYG group scored the highest in moistness, adhesiveness, chewiness, and overall acceptance. In addition, all groups except SSG exhibited antibacterial characteristics against P. bivia. In conclusion, Dasik with added agar was shown to complement the texture of Dasik due to the added sugar alcohol.