• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.167.1-167
• /
• 2003

To maintain high quality and to extend the shelf life of intact and minimally processed apple cubes, the effect of heat shock on the texture and color of apple cubes (Fuji) was evaluated in this study. After peeled and cored, the apples were cut into cubes of 1.5 cm. The heat shock was immersion in heated water from 25$^{\circ}C$ to 95$^{\circ}C$ in 10$^{\circ}C$ increments for 2 min and cooling to storage temperature as soon as possible after heat treatment. The effect of heat treatment in terms of color and texture measurements with respect to time was investigated, respectively during 7 days storage at in LDPE film bags without sealing at 4$^{\circ}C$, and 95% relative humidity air. Results suggest that heat shock (55$^{\circ}C$, 2 min) may have effectively delayed browning, and there were significant changes in color of apple cube when the temperature of heat shock is above 75$^{\circ}C$. And hardness, stiffness and firmness, which were used to describe texture, behaved similarly in the textural qualities. It was shown that the texture of the apple cubes was decreased with temperature increase. The value of them were most decreased to 70% of the initial ones after treated with 85$^{\circ}C$ and 95$^{\circ}C$ on the lust day.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.281-286
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep draw ability of the Al sheet. This study investigated the increase of the plastic strain ratio and the texture change of AA3003 sheet after the hot asymmetric rolling. The average plastic strain ratio of the initial AA3003 sheets was 0.69. After 83% hot asymmetric rolling at $200^{\circ}C$, the average plastic strain ratio was 0.83. The average plastic strain ratio of the 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 1.2 times higher than that of the initial AA3003 sheet. The ${\mid}{\Delta}R{\mid}$ of 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 0.83 times lower than that of the initial AA3003 sheet. This result is due to the development of the intensity of ${\gamma}-fiber$ texture and reduces the intensity of {001}<110> and {001}<100> textures after hot asymmetric rolling of AA3003 sheet.

• Progress in Medical Physics
• /
• v.33 no.4
• /
• pp.158-163
• /
• 2022

Purpose: We subjected scanning electron microscopic (SEM) images of the active layer of EBT3 film to texture analysis to determine the dose-response curve. Methods: Uncoated Gafchromic EBT3 films were prepared for direct surface SEM scanning. Absorbed doses of 0-20 Gy were delivered to the film's surface using a 6 MV TrueBeam STx photon beam. The film's surface was scanned using a SEM under 100× and 3,000× magnification. Four textural features (Homogeneity, Correlation, Contrast, and Energy) were calculated based on the gray level co-occurrence matrix (GLCM) using the SEM images corresponding to each dose. We used R-square to evaluate the linear relationship between delivered doses and textural features of the film's surface. Results: Correlation resulted in higher linearity and dose-response curve sensitivity than Homogeneity, Contrast, or Energy. The R-square value was 0.964 for correlation using 3,000× magnified SEM images with 9-pixel offsets. Dose verification was used to determine the difference between the prescribed and measured doses for 0, 5, 10, 15, and 20 Gy as 0.09, 1.96, -2.29, 0.17, and 0.08 Gy, respectively. Conclusions: Texture analysis can be used to accurately convert microscopic structural changes to the EBT3 film's surface into absorbed doses. Our proposed method is feasible and may improve the accuracy of film dosimetry used to protect patients from excess radiation exposure.

• Culinary science and hospitality research
• /
• v.24 no.3
• /
• pp.83-92
• /
• 2018

Sweet pumpkin yanggaeng were produced with stevia leaf powder as a partial sugar replacer(0 to 20% sucrose weight) and antioxidant. Characteristics of the yanggaeng were compared in moisture, total soluble solids, pH, color, texture, antioxidant properties, and preference scores. Moisture and total soluble solids were proportionally increased with increasing addition of stevia leaf powder(p<0.001). pH of control (without stevia) and SLP20(with 20% replacement of sucrose) were 7.05 and 6.82, respectively. L-value, a-value, and b-value were decreased with increasing amount of stevia leaf powder (p<0.001). Antioxidant activities (total polyphenols and DPPH radical scavenging activity) were gradually increased as more stevia leaf powder included in the yanggaeng(p<0.001). SLP20 being significantly different from others (p<0.001) had the highest values of hardness and chewiness, but there was no significant difference between cohesiveness and adhesiveness among samples. SLP4 had the highest preference in appearance and texture, otherwise SLP8 did the highest scores in flavor, sweetness and overall preference. SLP8, in which 8% sucrose was replaced with stevia leaf powder, was considered to be the most desirable for production of sweet pumpkin yanggaeng.

• Korean journal of food and cookery science
• /
• v.26 no.1
• /
• pp.32-40
• /
• 2010

This study was performed to determine the quality characteristics of mugwort-Sulgi with added chemical leavening agents. Mugwort-Sulgi was prepared with different levels of baking soda (0.3, 0.6, and 0.9%) and baking powder (0.3, 0.6, and 0.9%) and stored for 4 days. The a value significantly decreased with the addition of baking soda, and the b value significantly decreased over storage time. The pH value was significantly increased by the addition of baking soda, and significantly decreased with baking powder. The rate of swelling and poring was significantly increased with the addition of baking powder, and significantly decreased with baking soda. Hardness, springiness, cohesiveness, and gumminess were significantly increased with the addition of baking soda, while it significantly decreased with the addition of baking powder. According to sensory evaluation, taste, texture, and overall acceptance were highest in mugwort-Sulgi with 0.6% baking powder.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.3
• /
• pp.357-364
• /
• 2012

Quality characteristics of sausage with added pine needle powder (0%, 0.5%, 1.0%, 1.5%, 2.0%, and 2.5%) as an ingredient. The basic ingredients of sausage consisted of pork meat 60%, olive oil 20%, and ice water 20%. Sensory properties of sausage were analyzed by a sensory test, and the texture and color characteristics were measured using a texturometer and color meter, respectively. In the results of the sensory test, taste, texture, and overall preference were highest in the sample with added 1.5% pine needle powder. The sausage with added 1.5% pine needle powder was moderate in color intensity, pine needle flavor, and astringent taste. Hardness and gumminess of sausage were higher in 1.0% and 1.5% pine needle powder. However, springness and chewiness of sausage showed no significant differences. In terms of color intensity of sausage, L-value and a-value were lower and b-value was higher, depending on the pine needle powder amount. Development of off-flavor of sausage during storage was greater in 0% and 1.5% added sausages than in 2.0% sausage with increasing storage time. As a conclusion, sausages with added 1.5% and 2.0% pine needle powder were the most suitable for making functional sausage with added pine needle powder.

• Culinary science and hospitality research
• /
• v.23 no.5
• /
• pp.121-128
• /
• 2017

This study investigated the physicochemical, antioxidant activity, and sensory properties of yanggaeng (white bean jelly) prepared with various amounts of maca(Lepidium meyenii) powder. According to the results, $^{\circ}Brix$ value and pH of yanggaeng were decreased significantly by adding maca powder. Moisture contents of groups with 1% and 3% of maca powder were higher than that of control group. At the result of color measurement, L value of groups by the addition of maca powder was lower than that of control group, but b value of groups by the addition of Chinese artichoke powder was higher. Texture measurement score in terms of hardness, chewiness, and brittleness for yanggaeng was decreased significantly by the addition of maca powder. DPPH radical scavenging activity of groups by the addition of maca powder were higher than that of control group. NSA of groups with 7% of maca powder was higher than that of control group. As maca powder increased, antioxidant activity also became bigger. Sensory evaluation scores in terms of after swallowing, appearance, odor, taste, texture, and overall preference of groups with 3% and 5% of maca powder did show significant differences when compared to the control group. The results of this study suggested that addition of 5% maca powder was the best substitution ratio for yanggaeng.

• Culinary science and hospitality research
• /
• v.23 no.8
• /
• pp.1-10
• /
• 2017

This study investigated the quality characteristics of muffins by the amount of addition of suchero (0%, 25%, 50%, 75%, 100%) as there is increasingly higher interest in functional alternative sweetener. The effects of suchero were evaluated in terms of height, volume, weight, specific volume, baking loss rate, colorimeter, and sensory evaluation. Texture and moisture contents of muffins during storage (1, 2, 3 days) were measured. As the ratio of suchero increased, the volume, specific volume, and weight increased, whereas the volume and specific volume was not significant. During storage, moisture content of muffins decreased significantly. The moisture content of the sample containing suchero was higher than S0(control group). The addition of suchero increased L value of crust and crumb decreased, whereas a value and b value increased. The muffin with 100% of suchero (S100) in test group showed the lowest hardness. According to the sensory evaluation, the muffin with 50% of suchero (S50) showed the highest score in terms of appearance, color, flavor, taste, and overall acceptance, S50 showed the best result and the optimum addition of suchero.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.67-77
• /
• 2016

This study investigated the physicochemical, antioxidative activity, and sensory characteristics of yanggaeng prepared with various amounts of peach powder. According to the results, the pH of yanggaeng was decreased significantly by addition peach powder, but total titratable acidity of yanggaeng was increased significantly by addition peach powder. The sweetness ($^{\circ}brix%$) and moisture content of groups by the addition of peach powder were lower than those of control group. At the result of color measurement, L value of groups by the addition of peach powder was lower than that of control group, but a value and b value of groups by the addition of peach powder were higher. Texture measurement score in terms of hardness and brittleness for yanggaeng were increased significantly by addition peach powder. The contents of DPPH radical scavenging activity, and ABTS radical scavenging activity of groups by the addition of peach powder were higher than those of control group. As peach powder increased, antioxidative activity also became bigger. Sensory evaluation scores in terms of after swallowing, appearance, odor, taste, texture, and overall preference of groups with 4% and 6% peach powder were higher significantly when compared to the control group.

• The Korean Journal of Community Living Science
• /
• v.26 no.4
• /
• pp.707-716
• /
• 2015

To evaluate the effects of cherry silverberry (Elaegnus multiflora) juice on sulgidduk, rice cakes were prepared using different quantities of cherry silverberry juice (0%, 33%, 66%, and 100%). The pH level of the control group was higher than that of other groups with cherry silverberry juice. The moisture content of the control group was higher than that of other groups with cherry silverberry juice. In terms of color, the L-value were significantly higher in the control group than in other groups, whereas the a-value and the b-value were significantly lower in the control group than in other groups (p<0.001). The hardness, springness, gumminess, and chewiness of the control group showed the lowest values. Preferences for the appearance, texture, flavor, and overall acceptability of sulgidduk with 66% and 100% cherry silverberry juice were higher than those for other groups. These results suggest that cherry silverberry juice can increase the acceptability of sulgidduk and that 66-100% cherry silverberry juice may be appropriate for making sulgidduk.