• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.1
• /
• pp.9-13
• /
• 2008

This study was performed to investigate the quality characteristics of yanggaeng prepared with different ratios of Astragalus membranaceus powder : 2%, 4%, and 6%. Proximate composition, Hunter's color values, texture profile analysis, and sensory qualities were examined. The lightness of the yanggaeng decreased with increasing Astragalus membranaceus powder content. For the texture profile analysis, hardness increased with increasing Astragalus membranaceus powder content. In terms of sensory qualities, the 2% Astragalus membranaceus powder sample did not influence any of the sensory attributes of the yanggaeng.

• Journal of the Korean Home Economics Association
• /
• v.26 no.3
• /
• pp.103-108
• /
• 1988

Texture Profile Analysis (TPA) on cowpea and mung bean starch gels was performed with the Instron and the effect of the degree of compression on TPA parameters measured. Fracturability was almost independent of the degree of compression. hardness usually increased with increasing compression. Cohesiveness and chewiness decreased for mung bean starch gel as compression increases. Springiness in two starch gels increased a little from 55% to 65% compression and then decreased from 75% to 95% compression. Gumminess for mung bean starch gels decreased steeply from 55% to 75% compression, then it increased moderately up to 95% compression. Since the TPA parameters vary so widely with degree of compression, all TPA measurements should standardize the degree of compression.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.81-88
• /
• 1999

This paper was carried out to know the influence of advanced austempered ductile cast iron (ADI) on the tool life and mechanical properties of drilling machinability. For manufactured method of ADI, the spheroidal graphite cast iron were austenized at 90$0^{\circ}C$ for 1 hour and then austempered for 2 hour at 37$0^{\circ}C$ in the salt bath. And interrelationship has been investigated between tool life and mechanical characteristics of specimen material on drilling condition when the ordinary and step-feed drilling are carried out to drill holes of specimens. Tensile strength and hardness of ADI decrease and elongation of ADI increases with the increase austempered temperature. It is known that about 2 times of tool life in the case of step-feed decreases compared with ordinary feed due to the high hardness of ADI and hardness ascribed to the fact that retained austenite became to martensite state due to cutting heat in drilling. Under the constant feed rate 0.1mm/rev relation between hardness and length of end tip after drilling can be formularized to Hv=$788.46L^{-0.096}$ for the cutting speed 6.1m/min.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.310-316
• /
• 1988

The gelatinized model food system were prepared by combining moisture, starch and protein, and the textural properties of their gels of different temperatures and times of heating were investigated by the use of Instron Universal Testing Machine. The hardness, springiness, cohesiveness, gumminess and chewiness of model foods had a high correlation with solid content and the regression equations between the hardness of model foods and moisture content heated for 20min. at $80{\circ}C$ were as follows; $H(PS_4)=18.6405-3.8201M+0.1959M^2,\;H(P_1S_1)=244.7933-5.692M+0.0332M^2,\;H(P_4S)=693.0292-16.6884M+0.1005M^2$, The correlation coefficients were $0.996^{**},\;0.998^{**}\;and\;0.998^{**}$, respectively. Total correlations between textural parameters and temperature and heating times were different according to model foods. The correlation between textural parameters was proportional to protein foods, but the hardness and cohesiveness of starch foods showed the relationship of inverse proportion. Under low solid content, the parameters of model foods appeared to decrease as protein content increased. Under high solid content, the parameters of protein foods were higher than those of starch foods above some level of protein content. The regression equation between the hardness and protein content heated for 20min. at $80^{\circ}C$ was as follows; Hardness(20%)=5.6858-13.5670P+$9.7758P^2$ and the correlation coefficient was $0.95^{**}$.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.81-86
• /
• 1999

The textural characteristics of nonxaxy rice flour gels and rice cake(Injolmi) with different water contents and additives were evaluated after freezing and microwave heating. As moisture content of rice flour gels increased from 45% to 55%, its hardness and gumminess decreased, but adhesive and cohesiveness had no significant difference. Microwave heating did not markedly affect the texture but frozen storage was very effective to prevent the hardening of products. Hardness of reheated rice gels increased more rapidly in non-packaged sample than in PE wrap film and affected by storage time of 24hrs at 20$^{\circ}C$. As sugar content of rice flour gels increased from 0% to 10%, its hardness, adhesiveness, and gumminess decreased, while cohesiveness did not change.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.659-663
• /
• 1998

Mook is a traditional Korean food made from the sediment of mungbean, cowpea, buckwheat or acorn. The air-dried sediment of cowpea(6~9%, dry basis) was heated to 80~95$^{\circ}C$ by continuous(method A) or instantaneous(method B) heating method and held at that temperature for 20min and then cooled at 15$^{\circ}C$ for 3hrs. The optimum deformation rate for the measurements of hardness and cohesiveness of cowpea mook by Instron Universal Testing Machine was 55~65% by method A and 60~70% by method B. The hardness of mook made by method A was the highest at heating temperature of 9$0^{\circ}C$, whereas that by method B was linearly decreased as the heating temperature increased at all concentrations. The mook made by method B had higher cohesiveness than that by method A. The ratio of cohesiveness to hardness was also higher in mook made by method B.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.28-39
• /
• 2004

The effect of trace metallic additives on microstructure, surface appearance and hardness of zinc electrodeposits was investigated by using sulfate bath and flow cell system. The preferred orientation of Zn deposit with Fe additive was (103)(104)+(002) mixed texture and that of Zn deposits with both Fe-Ni and Fe-Co additives was (10 1), while Zn deposits with Fe-Cr additives had (002) preferred orientation. The surface morphology of the zinc deposits was closely related to the preferred orientation of the deposits. The glossiness of Zn deposit with Fe-Ni additives was higher than that of pure Zn deposit, while the glossiness of Zn deposits with both Fe-Co and Fe-Cr additives was lower than that of pure Zn deposit. The hardness of Zn deposits with both Fe-Ni and Fe-Co additives was noticeably higher than that of Zn-Fe deposit, while that of Zn deposit with Fe-Cr additives was similar to that of Zn-Fe deposit.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.6
• /
• pp.830-837
• /
• 2011

This study was carried out to investigate the quality characteristics of yellow layer cake mulberry powder. After making yellow layer cake with mulberry powder, water activity, crumb texture, crumb color, and sensory tests were investigated. After 1 day of storage, Aw of control with weak flour did not show any significant difference, whereas those with 1, 3. 5% mulberry powder showed a significant decrease in Aw. During storage, the Aw values of yellow layer cakes containing mulberry powder were consistent. Hardness, springiness, cohesiveness, and gumminess of the yellow layer cakes containing mulberry powder all decreased compared to those of control. Hardness, springiness, cohesiveness, and gumminess all increased with storage time. Further a higher percentage of mulberry powder was associated with a lower L value, but higher a value. b values were lower in the 1% and 3% mulberry powders, but 5% showed a slightly higher b value. An increase in storage time was associated with decreased L and b values and increased a value. The micrographs of yellow layer cakes with mulberry powder showed a slightly coarser porosity than that of controls. The results of the sensory test showed that the over-all acceptability of 1% mulberry powder cake was the best.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.83-88
• /
• 1998

From the evaluation of physical properties such as springiness, gumminess, adhesiveness, chewiness and hardness by the texture analyzer, vegetable soybean lines with green seed-coat were best as compared with those with black, brown, mixed, and yellow seed-coats. A panel test evaluated on the basis of taste, sweetness, chewiness, and total scores also indicated that soybean lines with green seed-coat were the best. The total scores of panel test was decreased in the order of green > yellow> black> brown seed-coat colored soybean. The mean value of sucrose content obtained by HPLC analysis was highest in black seed-coat colored soybean, and followed by green, yellow, and brown soybeans. The highest sucrose content (8.22%) was observed in 180362, a soybean line with green seed-coat. The full-season type soybeans showed much higher sucrose content than summer types which are mainly cultivated on farmer's fields for vegetable purposes. The final 13 lines selected from 300 colored soybeans showed nearly the same panel scores as Miwongreen. However, these lines had a great deal of variation in sucrose content, and much higher readings in texture analysis than Miwongreen, especially in chewiness and hardness which were the most important properties in vegetable soybeans.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.6
• /
• pp.596-604
• /
• 2001

Twelve varieties of Korean rice and ten varieties of Japanese rice were selected. After being milled. they were analyzed about various physicochemical properties such as moisture, protein and amylose, a -amylase activity, gelatinization properties. And after being cooked with proper amount of water texture and other physical properties were measured by Texturometer, Tensipresser and Rheolograph-micro. Finally the sensory evaluation test was carried out. The results were as follows. 1. In case of protein contents, amylose contents and $\alpha$-amylase activity, Korean rice had a slightly higher value than Japanese As a consequence. Korean rice showed a little stronger hardness and a little weaker stickiness compared with Japanese rice. 2. Amylose contents showed very high correlation with other physicochemical properties and peak viscosity and gelatinization temperature of RVA, the ratio of stickiness to hardness( -Hl/Hl ) of Texturometer and the tan $\delta$(the ratio of dynamic loss to dynamic viscoelasticity) of Rheolograph-micro showed high correlation with other analyzed properties. 3. The ( -/+)work balance of low compression test(25% ) of Tensipresser analysis(texture analysis on the surface of cooked rice) and tan f of Rheolograph-micro showed very high correlation with sensory evaluation results. By using this parameters as major independent variables, some trials to derive high confidence multiple regression equations were accomplished. By the equations it would be possible to make an approximate pre-estimate of eating quality for unknown japonica rice.