• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.385-388
• /
• 2008

Four kinds of PET fabrics were coated with Copper and Nickel by electroless chemical plating, and the electromagnetic wave shielding effectiveness for those samples have been examined. The shielding effectiveness showed between 90 dB and 70 dB, and it related to the fabric structure, such as cover factor and cloth density. The dense fabric structure showed the better shielding effect.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.6-11
• /
• 2004

The purpose of this study is to analyze the subjective fabric hand of sleepwear fabrics, and to assist in developing sleepwear fabrics that offer maximum comfort in wearing sensation. In general, the respondents noted that sleepwear fabrics made with polyester had better tactile sensation than those made with cotton, while satin weave fabrics felt better than plain weave fabrics. As regards the difference in fabric hand according to gender, female students responded with more receptiveness and sensitivity than male students in the category of woven fabric evaluation. As regards the same textile materials, the evaluations of female students and male students differed in fabric hand descriptors, particularly for the evaluation on cotton fabrics. Male students responded that both plain weave fabrics and satin weave fabrics were stiff while female students replied that satin weave fabrics had better tactile sensation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.946-954
• /
• 1995

The purpose of this study is to modify the hydrophobic property and dyeability of polyethylene terephthalate fiber. Methacrylic acid (2nA) was graftpolymerized with benzoyl peroxide (BPO) as initiator onto polyethylene terephthalate fabrics. The results were as follow; 1. Graft-polymerization exhibited maximum graft ratio at a temperature of 100"C. 2. The polymer was gradually grafted in great amount to the surface of MA-g-PET as graft ration increase; with the cross-section examination of MA-g-PET, it was discovered that graft-polymeriation had also taken place inside the textile core. 3. Dyes absorption of basic dyes and disperse dyes was improved as craft ratio increase; with resistance to laundering, the former showed grade 3-4 and the latter showed grade 5.de 5.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.313-317
• /
• 2005

The anisotropy in creep behavior of two types of nonwoven fabrics (needle-punched and thermobonded spun laid) has been studied. It has been observed that the amount of time dependent extension depends on the direction, amount of loading and the structure of nonwoven the fabrics. The time dependent extension (creep) for the nonwoven fabric increases with the increase in amount of load. The higher initial extension and creep are observed for needle-punched nonwoven fabric as compared to thermobonded spun-laid nonwoven fabric. The creep behavior of needle-punched nonwoven shows a logarithmic relationship with time, but the thermobonded spun-laid nonwoven fabric does not show such logarithmic relationship. For a particular fabric, the creep is dependent on the fiber arrangement and is minimum in the direction in which the proportion of fiber is maximum and visa versa.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.151-155
• /
• 2003

The abrasion behavior of three kinds of warp knitted fabrics, which are normally used for upper sole of footwear, was evaluated. We measured the changes of mechanical and structural properties of each sample as abrasion cycle increased. Each sample showed similar trends in compression and surface properties but there were significant differences in abrasion rate among the samples. The mechanical properties showed remarkable differences with directions. The frictional coefficient (MIU) of fabric surface increased at the beginning of abrasion and decreased as abrasion cycles increased. The weight and thickness of the fabric linearly decreased with abrasion cycles. The surface roughness (SMD) and the compressional resilience (RC) decreased as abrasion cycles increased while compressional energy (WC) increased.

• Fashion & Textile Research Journal
• /
• v.4 no.4
• /
• pp.399-404
• /
• 2002

The purpose of this study was to develop the rain melange fabrics with using the pulsar interlacing unit. The properties of the pulsar interlaced yarns (PI yarn) which were textured with the several texturing conditions were analyzed and compared with the regular interlaced yarn (IT yarn) and with normally composited yarn (CP yarn). The results were as follows : The PI yarn which has the best rain random melange effect could be obtained with following texturing condition; 3 kg/$cm^2$ of interlacing air pressure, 1.6 mm diameter of interlacing nozzle and 500 m/min of yarn speed. When IT yarn was compared with CP yarn, IT yarn had higher denier and tenacity than those of CP yarn and had lower elongation and shrinkage than those of CP yarn.

• Fashion & Textile Research Journal
• /
• v.4 no.6
• /
• pp.557-563
• /
• 2002

Water-soluble chitosan and water-insoluble chitosan with molecular weight of 2,000,000, 500,000, 80,000, and 40,000 with more than 90%of degree of deacetylation were produced to test antibacterial activity of chitosan against a pathogenic bacteria, Methicillin Resistant Staphylococcus aureus(MRSA). the AATCC Test Method 100and Modified AATCC Test Method 100 were used to evaluate the antibacterial activity of chitosan. Antibacterial activity of chitosan/acetic acid solution was the same when they were tested by two different methods, but those of polyester fabrics treated with chitosan/acetic acid solution were different in different antibacterial test. So several problems were found in the experimental methods. The AATCC Test Method 100 seems that excessive nutrition exists in inoculum solution by quantitative analysis on the basis the result of antibacterial activity on chitosan/acetic acid solution and amount of chitosan attached to the surface of treated fabrics.

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.70-76
• /
• 1995

The polyepichlorohydrine(poly(ECH)) was prepared by the condensation polymerization of epichlorohydrine. The cationic agent was prepared from poly(ECH) by amination of poly(ECH) with dimethyleneamine. Pretreatment of cellulosic fabric with the poly(ECH)amine produced a modified fabrics that could be dyed under neutral condition with reactive dye using small amount of the salt. Colour yield of cellulosic fabric were increased by increasing salt concentraction. cationic agent concentration. The optimum condition for colour yield was the concentration of cationic agent 5%(o.w.f), that of NaCl 4g/l, and that of $Na_{2}CO_{3}$5g/l. The dyeing of treated fabrics exhibits improved colour yield and high wash fastness.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.190-194
• /
• 2002

Human uses sight, tactile sense to evaluate Total Hand Value(FUUAI) of textile fabrics. Tactile sense is important factor which decided the Total Hand Value of a textile fabric. When human feels the FUUAI, physical and physiological phenomena are occurred in finger. We first found out physical variable that is happened in fingertip when human is feeling the FUUAI. Such physical variable means characteristic of action tactual motion of finger such as moving range, tactile time, moved distance, speed of finger and applied force by finger. We study the relationship between action tactual motion and the ability in which the human distinguishes the textile fabric. As a result, we could know the characteristics of the tactual motion of fingertip to get high distinguishable ability. The characteristics were different in men and women respectively. In the case of man, touched time and moving range influenced to distinguish, and moving range, and the moving speed of finger influenced, in woman's case.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.748-755
• /
• 2008

The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric using charcoal as colorants. Particle size of charcoal, dyeability(K/S), SEM morphology of dyed fabrics and color fastness were also investigated. In this study, cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye by the chemical linking of chitosan to the cellulose structure. The results obtained were as follows; Mean average diameter of charcoal was 1.44 ${\mu}m$. According to various conditions, the dyeing effects of 1% chitosan treatment on the dyeing of cotton fabrics using charcoal were the highest with 10%(owb) of charcoal at $90^{\circ}C$ for 120minutes and non-treatment of cotton fabrics were the highest with 15%(owb) of charcoal at $90^{\circ}C$ for 150minutes. Overall, K/S value of 1% chitosan treatment of cotton fabrics on the natural dyeing using charcoal was higher than non-treatment of cotton fabrics. It was observed the surfaces of cotton fabrics treated with chitosan were adsorbed with charcoal powders of particle size more than a non-treated chitosan fabric by SEM. The cotton fabrics were dyed with blackish gray color by charcoal gradually according to treating chitosan. The K/S value, that is indicative of dye affinity, became higher as the increase of treated chitosan concentration. The color fastness of charcoal, washing and light fastness was excellent as 4-5 grade.