• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.41-48
• /
• 1999

The removal of hemoglobin from acrylic acid grafted Nylon fabrics has been investigated. In order to change detergency of Nylon 6 fabric, acrylic acid(AA) were graft copolymerized on Nylon fabric using ammonium persulfate(APS) as a initiator, and then acrylic acid grafted Nylon was treated with NaOH solution. The graft ratio increased linearly with increasing acrylic acid concentration. The graft ratio was the highest when the concentration of APS was 0.05%, and it decreased as the concentration of APS increased. The surface of Nylon fabric became rough due to graft. Moisture regain was increased by graft and alkaline treatment, contact angle was also improved compared with the ungrafted. The hemoglobin was easily solubilized and removed from grafted Nylon fabric, while it was difficult to remove hemoglobin from ungrafted Nylon fabric. The effects of graft on removal of hemoglobin was related with increase of moisture regain and transformation of COOH to COONa by alkaline treatment.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.140-145
• /
• 2003

The purpose of this study is searching the Elm-Bark dyes' dyeability and antibacterial activities according to the dyeing time, pH, a mordant and the method of mordancy. We used two kinds of Elm-Bark dyes which's extracted by the Electrolytic reduction water and Distilled water. Silk fabric and Cotton/nylon union fabric was used for this study. The results are as follow. K/S value is increased according to the dyeing time and the suitable pH level is pH 3. Dyeability is good with Iron(II) sulfate$(FeSO_4\cdot{7H}_2O)$ on the pre-mordancy and Potassium dichromate$(K_2Cr_2O_7)$ on the post-mordancy. The Elm-Bark dyes by the Electrolytic reduction water has good colorfastness more than by the Distilled water. Antibacterial activities is excellent and the ratio is over than 99.5%.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.168-175
• /
• 2003

Ultramicrofiber(UMF) PET knitted fabric and regular PET plain woven fabric as reference sample were impregnated with waterborne polyurethane(PU) in a two-step process with dyeing/PU treatment and PU treatment/dyeing to investigate the effect of the treatment sequence. The waterborne PU impregnated fabrics were dyed with two kinds of vat and disperse dyes to investigate the dyeing properties and the dyeing fastnesses. In vat dyeing the rank of color strength(K/S) was in order of dyeing/PU impregnation > dyeing only > PU impregnation/dyeing, whereas in case of disperse dyeing, the order was dyeing/PU impregnation > PU impregnation/dyeing >dyeing only. Wash fastness of vat dyeing showed a higher 2-3 grade than disperse dyeing, while rubbing and light fastnesses were not good for disperse dyes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.71-76
• /
• 2012

A chip interconnection technology for smart fabrics was investigated by using flip-chip bonding of SnBi low-temperature solder. A fabric substrate with a Cu leadframe could be successfully fabricated with transferring a Cu leadframe from a carrier film to a fabric by hot-pressing at $130^{\circ}C$. A chip specimen with SnBi solder bumps was formed by screen printing of SnBi solder paste and was connected to the Cu leadframe of the fabric substrate by flip-chip bonding at $180^{\circ}C$ for 60 sec. The average contact resistance of the SnBi flip-chip joint of the smart fabric was measured as $9m{\Omega}$.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2002

The aim of study was to elucidate dyeability and antimicrobial and antifungal activity of silk fabrics dyed with Sophora Radix extracts according to different mordants. Dyes were extracted from Sophora Radix using ethanol. Then, silk fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60%(owf), the mordant was 3%(owf), L.R was 1:20, the temperature was $60~60^\circ{C}$, the time of dyeing was 60min., and the time of mordanting was 60min. The dyeability was evaluated by surface color, K/S values and durability of dye. The skin microorganisms used in this study was S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E coli, A. niger, C. albicans and T. mentatrophytes. The results are as follows; 1. When mordants were added, K/S value of silk dyed was not improved much and surface color was 2.2Y to 8.8Y in H(hue) value which indicated greenish yellow to raddish yellow 2. The color fastness tests to light, perspiration, dry-cleaning, rubbing, and stain fabric washing show 4~5th degree which were valuated excellent. The color fastness to fade washing was improved to 3~4th degree by addition of $K_2CrO_7$ mordants. 3. Antibacterial activity of silk dyed using no-mordant as well as mordants was excellent on S. aureus, B. subtilis, S.epidermidis and P.acnes, but showed poor antibacterial activities on P.aeruginosa and E.coli such as gram negative baterials 4. Antifungal activity of silk dyed with ethanol extracts was good on A.niger, C.candida and T.mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 gous in silk dyed mordanting with $SnCl_2\cdot{2H}_2O$.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.49-58
• /
• 2006

The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.10
• /
• pp.1665-1672
• /
• 2009

This study examines the comfort of outdoorwear by electrocardiogram (ECG) and electroencephalogram (EEG) analyses. An experiment that consisted of rest (30 min), exercise (30 min), and recovery (20 min) periods was administered in a climate chamber with 10 healthy male participants. Two kinds of outdoorwear made of 100% cotton fabrics ('Control') and specially engineered fabrics having the feature of quick sweat absorbency and high speed drying fabric ('Functional') are evaluated in the experiment. ECG and EEG signals were obtained during the rest and recovery periods for the two outdoorwear conditions. The ECG analysis identified a smaller decrement of high frequency (HF) power for the 'Functional' when compared with the 'Control' during the recovery period. Next, the EEG analysis showed that the relative band powers of slow $\alpha$ and mid $\alpha$ increased for the 'Functional' while they decreased for the 'Control' and that the ratio of $\alpha$ power to high $\beta$ power was higher for the 'Functional'. The evaluation results indicate that the participants could remain relaxed more with less stress while wearing the functional outdoorwear that demonstrated the positive effects on autonomic nervous system (ANS) activities. The present study is significant in regard that use of ECG and EEG for the assessment of wear comfort is the first in the field of clothing and textile.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.3
• /
• pp.149-163
• /
• 2011

Hanjisa(Korean paper yarn), a new material made from the traditional Korean paper, has been developed through local R&D efforts, reflecting the current trend highly valuing environmental friendly. This new material is considered suitable for the 21C lifestyle and culture pursuing improved quality of human life and the environment. Therefore, this study aims to widely make known the originality and functions of the environmentally friendly Korean paper yarn, as well as to increase its commercial value. Furthermore, a new category of apparel design is presented by studying painting dyeing based on transformational tuck techniques and wax resist dyeing with formative features of repeated lines and rhythms of shells in order to implement three-dimensional and decorative artistic expressions. The texture of the Korean cotton paper yarn was particularly suitable to employ tuck and dyeing techniques Which express formative features of shell. Also, the material was useful for expressing the three-dimensional feelings with repeated curves and cross sections of shells. Moreover, paraffin resist dyeing and stitch techniques were used in order to avoid monotony and the images of shells visually materialized. Through the results stated above, this study could explore how to overcome obstacles to globalization of the Korean modern apparel such as its uniqueness, limit of materials or absense of internationality by applying modern design to the Korean paper fabrics. In the future, it is expected that more manufactures could produce and supply the new materials so as to make widely known the originality of the Korean paper fabrics and develop the material into a popular organic product fitting the modern lifestyle.

• Journal of the Korean Home Economics Association
• /
• v.27 no.4
• /
• pp.167-191
• /
• 1989

The present study was conducted to devlop and appropriate retirement home model for the elderly in terms of clothing and textiles; nutrition, health, and foodservice; housing and environment; and psychological adaptation. Specifically, the purposes of the study were: 1) to provide basic guidelines for clothing by comparing the clothing behavior of the elderly living in the retirement home and those living in their own homes with family, 2) to provide basic guidelines for balanced diet and effective foodservice, 3) to develop an ideal life space and facilities, and 4) to assess the psychological characteristics of the elderly. Questionnaires, observation, experimental method, and survey of literature were used for the study. Clothing behavior showed that the elderly were much concerned about clothing, and they preferred comfortable as well as fashionable designs. The elderly in the retirement homes complained of a lack of quantity and variety in clothing. They preferred natural fiber rather than blended fabrics. Flame resistance, thermal insulation, and flexibility of textile fabrics were found to be prime considerations in manufacturing and selecting clothing materials for the elderly. The health status of the surveyed elderly was generally good, but some poor eating habits were observed. Dietary nutrients intakes were generally sufficient, but several nutrients intakes were insufficient. The level of equipment in the kitchens of the institutions was low. Furthermore, the employment rate of dietitians in institutional settings was extremely low. This resulted in a lack of systematic foodservice management. Residents in the institution were generally satisfied with present life space and facilities but this was mainly because of abandonment, adaptation, and past experience. Optimal allocation of residents per bedroom and an adequate design for storage, bathroom, utility room, and dining room were recommended. The comparison of psychological status of the elderly living at home was more stable than those living in an institution. The emotional state of the elderly living in the institution was characterized by loneliness; they did not have close interpersonal relationships or future plans. An appropriate model for the elderly was developed on the basis of these findings.